SAL PIXIE Aircon Controller User Guide

SAL PIXIE Aircon Controller

Voorwoord
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY, PLEASE READ THESE INSTRUCTIONS AND THE WARRANTY BEFORE INSTALLING THE PRODUCT.

SAL-producten zijn ontworpen in overeenstemming met alle verplichte internationale en Australische normen, die installatie vereisen in overeenstemming met AS/NZS3000 door een gekwalificeerde installateur en regelmatige reiniging en onderhoud van de apparatuur. Producten worden verkocht in overeenstemming met de volgende instructies en de standaard verkoopvoorwaarden van SAL, beschikbaar via www.sal.net.au.

Vanwege voortdurende product- en informatie-updates, maken productgegevens afkomstig van sal.net.au geen deel uit van enig contract en/of technische prestatiegarantie, tenzij uitdrukkelijk schriftelijk bevestigd door SAL op het moment van bestelling. De draadmodeltekeningen van het product in dit document zijn uitsluitend bedoeld ter illustratie en kunnen afwijken van het uiteindelijke fysieke product. De installatie-instructies kunnen zonder voorafgaande kennisgeving worden gewijzigd.

Productintroductie

PIXIE Aircon Controller is designed to control Daikin ducted aircons, with simple wiring to indoor units. Eachair conditioningn indoor unit requires one PIXIE Aircon Controller.

Productillustratie

Producteigenschappen

• Control Daikin ducted aircons (check section 4.1 for compatibility list)
• Eenvoudige bedrading
• Can co-exist with one Daikin official wired remote controller
• Physical buttons to facilitate commissioning and testing
• In-built LED indicators for clear status indication

Het Pakket Omvat:

• PIXIE Aircon Controller – DK * 1
• Snelstartgids * 1

*All drawings shown are for illustrative purposes only, actual product may vary due to product enhancement.

Specificaties

Installatie en bedrading

Daikin Indoor Unit Compatibility**
Please confirm the compatibility before installation. Compatible with (as of Nov 2025):

Premium Inverter Ducted,
FDYA 71/85/100/125/140/160 AV19, FDYQ 180/200/250 LCV1

Inverter Ducted,
FDYAN 50/60/71/85/100/125/140/160 AV1, FDYQN 180/200 LCV1, FDYQN250LBV1

Slimline Ducted,
FBA 50/60 BAVMA, FBA 71/85/100/125/140 BVMA

Bulkhead System,

• FDYBA 25/35/50/60/71 AV1
• **This list is compiled as of Oct 2025 and subject to change without prior notice.

Voorbereiding

Please make sure theair conditioningn system operates properly with its official wired remote controller.

Installatie

1. Turn OFF the electricity supply to the air conditioner.
2. Connect the PIXIE Aircon Controller to the indoor unit as per the wiring diagram (There is no polarity requirement for the P1 and P2 terminals).
3. Switch ON the electricity supply to the aircon, allow the aircon wired remote controller to initiate, wait until it displays and operates as normal.
4. Check the LED indicators on the PIXIE Aircon Controller. When the top indicator (Bluetooth) is white, and the Stat indicator is in solid blue, this controller is ready for commissioning.
5. Add this PIXIE Aircon Controller to the PIXIE or PIXIE PLUS App, and enjoy the smart.

Bediening

Zet knop
Single click: Turn ON/OFF the aircon. When the aircon is OFF, the Mode LED indicator is flashing in white. When the aircon is ON, the Mode LED indicator is lit in a solid color.

Quickly 4 Clicks: The PIXIE Aircon Controller enters pairing mode. In this mode, the top LED indicator (Bluetooth) will flash in blue and white; it will stop flashing when a pairing process is finalised or in 30 seconds, whichever occurs earlier.
Quickly 9 Clicks: Reset the PIXIE Aircon Controller to factory default. The top LED indicator (Bluetooth) will flash in blue and white for 3 seconds, then stay on white.

Ctrl Button (Control Button)The 
Ctrl Button (control button) is only functional when the aircon is ON.
Single click: Switch the aircon to the next mode, cycling through COOL -> HEAT -> DRY -> FAN.

DIP-schakelaar
Please set to OFF for most applications.

LED-indicatoren

Hoe de app te downloaden

• Scan the QR code or go to the App Store (IOS) or Google Play (Android) to download the free PIXIE app to your smartphone.
• IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad,a nd iPod touch
• Android: Requires Android 4.4 or above; devices must support Bluetooth 4.0
• De bovenstaande specificaties zijn alleen ter referentie en kunnen zonder voorafgaande kennisgeving variëren.

Garantie

In accordance with SAL’s standard terms and conditions of sale, SAL warrants this product to be free from defects in materials and or workmanship for a period as stated below for goods not subject to incorrect installation, maintenance, operation, mishandling, environmental, unauthorised modification,s or electrical operating conditions outside the nominated product specification as detailed in these installation instructions.

De voordelen die u door deze garantie worden geboden, komen bovenop andere rechten en remedies die u volgens de wet hebt. Onze producten worden geleverd met garanties die niet kunnen worden uitgesloten onder de Australische consumentenwetgeving. U hebt recht op vervanging of terugbetaling bij een ernstig defect en op compensatie voor elk ander redelijkerwijs voorzienbaar verlies of schade. U hebt ook recht op reparatie of vervanging van de goederen als deze niet van aanvaardbare kwaliteit zijn en het defect geen ernstig defect betreft.

Garantietermijn – residentieel gebruik (12) maanden, commercieel gebruik (12) maanden

Hoe een claim indienen?

• Step #1 – Within 30 days of the fault discovery, please contact the original place of the SAL product purchase during standard (local) business hours, with the following information: (a) proof of purchase,e (b) description and quantity of the claimed fault, and (c) address of installation. (d) operating hours of the product.
• Step #2 – It is then the responsibility of the original place of product purchase to report the matter to SAL after-sales.;

• Stap #3 – Bij review of your claim and if the product is required to be returned to SAL for technical evaluation, then at the owner’s expense,e the product must be returned to SAL as per the above-nominated locations.
• Step #4 – Pending the evaluation, the claim will be validated, resulting in the product being repaired or replaced with the same or best equivalent product at the discretion of SAL, or rejected if the product fault was found to be caused by conditions beyond the responsibility ofSAL’sL warranty obligations. Consideration of installation, product removal, return freight, and or testing feesise not the responsibility of SAL.

Veelgestelde vragen