Manufacturer of automotive diagnostic tools, including OBD2 scanners, head-up displays (HUDs), and car battery testers for vehicle maintenance.
ikKiKin is a provider of automotive electronics and diagnostic solutions designed to make vehicle maintenance accessible to both DIY enthusiasts and professional mechanics. The brand's core product lineup includes advanced OBD2/EOBD scanners capable of reading and clearing engine fault codes, analyzing real-time data streams, and checking emission readiness.
In addition to diagnostic tools, iKiKin manufactures Head-Up Displays (HUDs) that project key driving metrics like speed, RPM, and navigation directions onto the windshield for safer driving. Their portfolio also extends to digital battery analyzers and throttle response controllers, supporting a wide range of vehicle makes and models with user-friendly interfaces and robust functionality.
Nieuwste handleidingen van manuals+ samengesteld voor dit merk.
Bekijk video's over de installatie, configuratie en probleemoplossing van dit merk.
Veelgestelde vragen over handleidingen, registratie en ondersteuning voor dit merk.
On most iKiKin dual-system HUDs, the screen will flicker upon powering on. During this time, press the specific selection button (often the 'M' or '+' button) within 5 seconds to toggle between OBD2 and GPS systems. If no selection is made, it will default to the last used mode.
Ensure your vehicle is OBD2 compliant (typically 1996 or newer). Check that the cable is securely seated in the OBD port. If connection fails, try turning the ignition off and on again, or test the device on another vehicle to rule out a port issue.
Standard iKiKin battery testers like the BT60 are designed for 12V and 24V systems, but you should check the specific voltage range in your user manual. Some smaller models may only support 12V batteries.
Speed inaccuracies can occur due to differences between the car's dashboard logic and the HUD data. You can usually calibrate this in the HUD settings menu by adjusting the speed parameter value (e.g., changing the default from 107 to 102).