The 3Doodler is the world's first and best 3D printing pen, allowing users of all ages to draw in three dimensions and bring their creative ideas to tangible life.
3Doodler is the creator of the world's first 3D printing pen, revolutionizing the way people create art, design, and learn. Launched in 2013 via a highly successful Kickstarter campaign, 3Doodler has grown to become the most recognized and widely used 3D printing tool globally. Their innovative pens melt plastic filament that cools and solidifies almost instantly, enabling users to draw free-standing, three-dimensional structures right in the air.
With products catering to children, hobbyists, and professionals alike, 3Doodler offers a range of devices such as the 3Doodler Start+ for young creators, the Flow, and the Create+ or PRO models for advanced artistic expression. Beyond just pens, the brand provides a rich ecosystem of colorful plastic filaments, stencils, educational projects, and STEM-based learning tools that inspire boundless creativity.
Nieuwste handleidingen van manuals+ samengesteld voor dit merk.
Bekijk video's over de installatie, configuratie en probleemoplossing van dit merk.
Veelgestelde vragen over handleidingen, registratie en ondersteuning voor dit merk.
While the pen is on and hot, double-click the fast or slow speed button. The light will flash to indicate it is reversing. Once it stops, gently pull the back of the strand. If the plastic is too short to grab, use the provided unblocking tool to push it through the back.
Ensure the USB cable or power adapter is securely connected to a working 5V 2A power outlet. If you have a Start+ pen, verify it's fully charged. For Create+ or PRO models, double-check that the control switch is set to the correct setting (not OFF).
No, once the plastic has been extruded and melted through your 3Doodler pen, it cannot be reused. Also, be sure to snip the melted ends of any partially used filament before re-inserting it to prevent clogs.
Yes, 3Doodler offers a two-year warranty and lifetime support for pens, filaments, and accessories purchased through authorized retailers (proof of purchase required).
On models like the Create+, slide the control switch to ABS/FLX or PLA based on the filament. For the 3Doodler PRO, use the tactile temperature dial to increase or decrease the temperature, shown on the LCD screen limit.