Gebruikershandleiding voor het ALTO TS108C 600W actieve kolomluidsprekersysteem

Invoering

The ALTO TS108C is a compact, all-in-one column array PA speaker system designed for clear, room-filling sound. This system integrates an elevated line array, a built-in subwoofer, a three-channel digital mixer with reverb, and Bluetooth streaming capabilities. It is suitable for solo musicians, event DJs, and various venues requiring high-performance audio in a portable format.

Image: The ALTO TS108C speaker system, consisting of the subwoofer base, column array, and a branded carrying bag for the column components.

Inhoud van het pakket

Controleer of alle hieronder vermelde artikelen in uw pakket zitten:

• TS108C Basis Subwoofer
• 3x Kolomvormige array-bevestigingen
• Shoulder Column Carry Bag
• 1.5M (4.9 ft.) Power Cable
• Snelstartgids
• Veiligheids- en garantiehandleiding

Installatie-instructies

1. Montage

1. Place the TS108C Base Subwoofer on a stable, flat surface.
2. Carefully connect the three columnar array attachments to form the full column. Ensure each section clicks securely into place.
3. Insert the assembled column array into the designated slot on top of the subwoofer base.

2. Stroomaansluiting

• Connect the provided power cable to the AC input on the rear panel of the subwoofer.
• Steek het andere uiteinde van de stroomkabel in een geaard stopcontact.
• Zorg ervoor dat de voltage selector switch (if present) is set to the correct voltage for your region (e.g., 115V or 230V).

3. Eerste verbindingen

The TS108C features a 3-channel digital mixer. Refer to the rear panel diagram for input locations.

Image: Close-up of the TS108C rear panel, highlighting the input channels (Ch 1, Ch 2) with XLR/TRS combo jacks, BT/AUX input, and MIX OUTPUT XLR connector.

• Kanaal 1 & 2: Use XLR or 1/4" TRS cables to connect microphones, instruments, or line-level devices.
• BT/AUX: For Bluetooth audio streaming or connecting external devices via a 1/8" (3.5mm) auxiliary cable.
• Mix-uitvoer: Use an XLR cable to link to another TS108C unit or an external PA system.

Gebruiksaanwijzing

1. Inschakelen

After all connections are made, press the power switch located on the rear panel to turn on the unit. The power indicator light will illuminate.

2. Bedieningselementen van de mixer

Each input channel (Ch 1, Ch 2) features:

• Versterkingsknop: Adjusts the input level for the connected device. Start with the gain low and gradually increase.
• Reverb-knop: Controls the amount of reverb effect applied to the channel.
• EQ Knobs (High/Low): Adjusts the treble and bass frequencies for tone shaping.
• Klem-LED: Indicates when the input signal is too high. Reduce the gain if this LED illuminates consistently.

3. Bluetooth-koppeling

Image: A smartphone screen showing a music player interface, with a Bluetooth symbol indicating a wireless connection to the ALTO TS108C speaker system.

1. Druk op de PAAR button on the rear panel of the TS108C. The Bluetooth indicator will flash.
2. On your Bluetooth-enabled device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
3. Select "ALTO TS108C" from the list of available devices.
4. Once paired, the Bluetooth indicator on the TS108C will glow solid.
5. Adjust the BT/AUX gain knob to control the volume of the Bluetooth audio.

4. DSP Speaker Modes

The TS108C offers four application-specific DSP modes to optimize sound for different scenarios:

• Normaal: Standard flat frequency response.
• Live: Optimized for live music performances.
• Deejay: Enhanced bass and treble for DJ applications.
• Aangepast: Allows for user-defined EQ settings via the Alto Pro App.

Select the desired mode using the dedicated button on the rear panel or through the Alto Pro App.

5. Alto Pro App Control

Image: Two smartphones displaying the Alto Pro App, illustrating the user interface for wireless control over mixer settings, EQ, and speaker modes.

The Alto Pro App (available for iOS and Android) provides wireless control over the TS108C's mixer and speaker functions. This includes:

• Changing DSP Speaker Use modes.
• Customizing EQ settings.
• Adjusting volume and EQ for each channel.
• En nog meer.

Download the app from your device's app store and connect via Bluetooth for full control.

Onderhoud

1. Schoonmaken

• Koppel altijd de stroomkabel los voordat u gaat schoonmaken.
• Gebruik een zachte, droge doek om de buitenoppervlakken af ​​te vegen.
• Vermijd het gebruik van schurende reinigingsmiddelen, oplosmiddelen of was, aangezien deze de afwerking kunnen beschadigen.
• For grilles, use a soft brush or vacuum cleaner with a brush attachment to remove dust.

2. Opslag en transport

Image: A person carefully disassembling the column array sections and placing them into the provided carrying bag, demonstrating the portability of the system.

• When not in use, store the TS108C in a cool, dry environment, away from direct sunlight and extreme temperatures.
• For transport, disassemble the column array and store it in the provided carrying bag.
• The subwoofer features a built-in handle for easy lifting and carrying.
• Protect the unit from impacts and excessive vibrations during transport.

Probleemoplossing

Specificaties

Garantie-informatie

The ALTO TS108C is covered by a Beperkte garantie. For specific terms, conditions, and duration of the warranty, please refer to the included Safety & Warranty Manual or visit the official ALTO webwebsite. Bewaar uw aankoopbewijs voor garantieclaims.

Steun

For further assistance, technical support, or to download the latest version of the Alto Pro App, please visit the official ALTO Professional webwebsite:

www.altoproaudio.com

You may also contact ALTO customer service directly for support inquiries.

Let op: er zijn geen officiële productvideo's beschikbaar bij de productgegevens die in deze handleiding kunnen worden opgenomen.