Fenix PD35R ACE Tactical Flashlight User Manual

Invoering

The Fenix PD35R ACE is a high-performance, USB rechargeable LED tactical flashlight designed for various lighting needs, including outdoor activities and law enforcement. It features a powerful 2000 lumen output, a 380-meter beam distance, and Fenix's patented SET output customization system, offering three distinct mode selection profiles. This manual provides detailed instructions for its safe and effective use.

Image: The Fenix PD35R ACE flashlight, highlighting its robust construction and side switch.

Wat zit er in de doos?

• Fenix ​​PD35R ACE zaklamp
• Oplaadbare lithium-ionbatterij (meegeleverd)
• USB Type-C oplaadkabel
• Holster
• Draagkoord
• Reserve O-ring
• EdisonBright Accessory Case

Instellen

Batterij installatie

1. Draai de achterkant van de zaklamp tegen de klok in los.
2. Insert the included Fenix ARB-L18-4000P Lithium-Ion battery with the anode (+) end facing towards the flashlight head.
3. Screw the tail cap back on clockwise until it is fully tightened. Ensure a secure connection for proper operation and waterproofing.

Initieel opladen

Before first use, it is recommended to fully charge the battery. The PD35R ACE features a hidden USB-C charging port.

1. Locate the rubber cover on the side of the flashlight head, near the side switch.
2. Lift the rubber cover to expose the USB Type-C charging port.
3. Connect the USB Type-C cable to the flashlight and the other end to a USB power source (e.g., wall adapter, power bank, computer).
4. The charging indicator light will show the charging status. A red light indicates charging, and a green light indicates a full charge.
5. Once charging is complete, securely close the rubber cover to maintain the flashlight's waterproof rating.

Afbeelding: Overview of Fenix PD35R ACE features, including the hidden USB-C charging port.

Gebruiksaanwijzing

The Fenix PD35R ACE utilizes a dual-switch system: a tactical tail switch for momentary/constant on/off and a side switch for output selection and mode switching.

Aan/uit

• Tijdelijk aan: Druk de tactische schakelaar aan de achterkant half in. Laat los om het apparaat uit te schakelen.
• Constant aan/uit: Fully press the tactical tail switch until a click is heard to turn the flashlight on or off.

Uitvoerselectie

With the flashlight on, single-click the side switch to cycle through Eco, Low, Med, High, and Turbo modes.

SET Mode Selection (ACE System)

The PD35R ACE features three distinct SET modes (Tactical Operation, Military and Duty, Outdoor Activity) that customize the available output levels and their order. To switch between SET modes:

• With the flashlight off, press and hold the side switch for 3 seconds. The flashlight will flash to indicate the current SET mode.
• Release the side switch, then quickly single-click it to cycle through the three SET modes.
• Once the desired mode is indicated by its unique flash pattern, press the tactical tail switch to confirm and exit.

Image: The SET 3-in-1 system, illustrating the customizable output options for different operational profiles.

Stroboscoop- en SOS-modi

• strobe: With the flashlight on, press and hold the side switch for 0.8 seconds to activate Strobe mode. Single-click the side switch to return to the previously used general mode.
• SOS: In Outdoor Activity SET mode, cycle through the general modes until SOS is reached.

Opladen

The Fenix PD35R ACE features a convenient USB Type-C charging port. Ensure the flashlight is off during charging for optimal performance.

• Open the rubber cover on the flashlight head to access the USB-C port.
• Connect the provided USB-C cable to the flashlight and a power source.
• De oplaadindicator is rood tijdens het opladen en wordt groen wanneer de batterij volledig is opgeladen.
• Charging time for a fully depleted battery is approximately 3-4 hours, depending on the power source.
• Always close the rubber cover tightly after charging to maintain water resistance.

Onderhoud

• Schoonmaak: Maak de behuizing van de zaklamp regelmatig schoon met een zachte doek. Gebruik voor hardnekkig vuil een reinigingsmiddel.amp lap. Vermijd agressieve chemicaliën.
• O-ringen: Inspect the O-rings regularly for wear and tear. Replace them if damaged to maintain the waterproof seal. Lubricate O-rings with silicone grease as needed.
• Draden: Keep the threads of the tail cap clean and lubricated to ensure smooth operation and good electrical contact.
• batterij zorg: Store the battery in a cool, dry place. If the flashlight will not be used for an extended period, remove the battery to prevent leakage. Recharge the battery every four months to prolong its lifespan.

Probleemoplossing

Als uw Fenix ​​PD35R ACE zaklamp niet goed functioneert, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

• Flashlight does not turn on or flickers:
  • Controleer of de batterij correct is geplaatst, met de positieve (+) pool naar de kop gericht.
  • Ensure the tail cap is fully tightened. Loose connections can prevent power flow.
  • The battery may be low on charge. Try charging the battery fully.
  • Reinig de contactpunten van de batterij en de zaklamp met een alcoholdoekje.
• Flashlight won't charge:
  • Zorg ervoor dat de USB-C-kabel stevig is aangesloten op zowel de zaklamp als de stroombron.
  • Probeer een andere USB-C-kabel of voedingsadapter om defecte accessoires uit te sluiten.
  • Controleer of de oplaadpoort schoon en vrij van vuil is.
  • The battery might be deeply discharged. Allow it to charge for a longer period, or try a different battery if available.
• Output modes are not cycling correctly:
  • Zorg ervoor dat de batterij voldoende is opgeladen.
  • Refer to the 'Operating Instructions' section for correct mode selection procedures, especially for SET modes.

Specificaties

The following table details the performance specifications of the Fenix PD35R ACE flashlight:

Image: Detailed technical specifications for the Fenix PD35R ACE across all output modes.

Garantie en ondersteuning

The Fenix PD35R ACE flashlight comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Fenix dealer or visit the official Fenix webwebsite voor contactgegevens.