SwitchBot Lock Pro and Fingerprint Authentication Pad Instruction Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your SwitchBot Lock Pro and Fingerprint Authentication Pad. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Veiligheidsinformatie

• Ensure the door surface is clean and dry before installation.
• Use only the provided accessories for installation.
• Houd het apparaat uit de buurt van extreme temperaturen en vocht.
• Probeer het apparaat niet zelf te demonteren of te repareren. Neem contact op met de klantenondersteuning voor hulp.
• After using adhesion promoter, always wash your hands thoroughly.

3. Instellen

3.1 Items to Prepare

Voordat je begint, zorg ervoor dat je de volgende spullen bij de hand hebt:

• SwitchBot Lock Pro unit
• Magneet
• Phillips-schroevendraaier
• Reinigingsdoekjes
• Adhesiepromotor
• Reinforcing tape

3.2 Installing the Thumb Turn Holder

1. Remove the thumb turn holder from the Lock Pro unit.
2. Adjust the attachment to its maximum extension using a screwdriver.
3. Place the holder over your door's thumb turn and tighten the screws to secure it. Ensure the center of rotation is aligned as much as possible.

3.3 Adjusting Lock Pro Height and Position

1. Remove the four screws from the back panel of the Lock Pro unit.
2. Place the Lock Pro unit over the installed thumb turn holder. Adjust the height of the plate to match the thumb turn's height.
3. Mark the position for attaching the Lock Pro unit with a pencil. Remember the height of the adjustment plate and the screw hole positions.
4. While keeping the attachment on the thumb turn, remove the Lock Pro main unit.
5. Tighten the screws of the height adjustment plate at the previously marked positions.

3.4 Preparing the Door Surface

1. Using a cleaning tissue, wipe off any dust or dirt from the door surface where the Lock Pro will be attached.
2. Wipe the desired attachment position with the adhesion promoter. (Remember to wash your hands thoroughly after use.)

3.5 Attaching Lock Pro

1. Peel off the protective seal from the back of the Lock Pro unit.
2. Carefully align the central axis of the attachment with the center of the thumb turn.
3. Attach the Lock Pro unit to the door surface. Hold it firmly in place for approximately 2.5 minutes to ensure strong adhesion.

3.6 Magneetinstallatie

The magnet helps the Lock Pro detect the door's open/closed status.

1. Peel off the protective sheet from the 3M double-sided tape on the magnet.
2. Attach the magnet to the door frame, ensuring it is parallel to the Lock Pro unit and the distance between them is within 3cm.

3.7 Reinforcing Tape (Optional)

If you are concerned about the Lock Pro coming off with just double-sided tape, you can use the reinforcing tape.

1. Apply the reinforcing tape around the Lock Pro unit and onto the door surface.
2. Hold the Lock Pro unit firmly by hand for approximately 2.5 minutes.
3. Gently peel off the reinforcing tape after 48 hours. The Lock Pro can be used normally during this period.

3.8 App Pairing and Calibration

After physical installation, pair the Lock Pro with the SwitchBot app and calibrate it.

1. Pull out the insulation sheet from the Lock Pro unit.
2. Follow the app's instructions to add the device and perform calibration.

4. Operating the Lock Pro

The SwitchBot Lock Pro offers multiple convenient ways to unlock your door:

• Vingerafdrukherkenning: With the Fingerprint Authentication Pad, your fingerprint becomes your key. It boasts over 98% accuracy, recognizing fingerprints from children and the elderly reliably.
• NFC Card/IC Card: Compatible with transportation IC cards like Suica, PASMO, and Felica, as well as other NFC cards. Simply tap your card or a smartphone/smartwatch registered with an IC card to unlock.
• Tijdelijke wachtwoorden: Generate time-limited passwords for friends or one-time passwords for services like house cleaning.
• Stembesturing: Integrate with Alexa for hands-free unlocking. For example, say "Alexa, unlock the door."
• Apple Watch: Unlock your door conveniently with your Apple Watch when you're out without your hands free.

4.1 App Operation and Management

The SwitchBot app allows for comprehensive control and management of your Lock Pro and Fingerprint Authentication Pad.

• Manage up to 100 fingerprints for various family members.
• Monitor unlock/lock history to track who enters and exits your home.
• Check the lock status remotely when paired with a SwitchBot Hub Mini (sold separately).

5. Onderhoud

5.1 Levensduur en beheer van de batterij

The Lock Pro is equipped with a long-life battery, lasting 9 to 12 months. For enhanced reliability, a main/sub dual-system rechargeable battery (sold separately) can be used. If the main battery runs out, power is automatically supplied from the sub-battery, significantly reducing the chance of being locked out due to battery depletion.

5.2 Reiniging en bescherming

The Fingerprint Authentication Pad is made of high-quality, soft silicone material, offering strong elasticity and resilience. It is easy to clean; simply wipe away dirt or water stains to restore its new condition.

6. Probleemoplossing

If you encounter issues with your SwitchBot Lock Pro or Fingerprint Authentication Pad, please refer to the following common problems and solutions:

• Fingerprint Recognition Errors: Ensure your finger is clean and dry. Re-registering your fingerprint or adding multiple scans of the same finger can improve accuracy.
• Bluetooth Connection Instability: Ensure your smartphone is within range. If issues persist, consider using a SwitchBot Hub to connect via Wi-Fi for a more stable connection.
• Lock Mechanism Feels Heavy: This might indicate a compatibility issue with your door type. Ensure the Lock Pro is installed correctly and aligned with the thumb turn.
• Rapid Battery Depletion: Incorrect installation or misalignment can increase the load on the motor, leading to faster battery drain. Recheck installation alignment.

For further assistance, please contact SwitchBot customer support.

7. Specificaties

8. Garantie en ondersteuning

For warranty information and customer support, please refer to the official SwitchBot website or contact their customer service directly. Details can typically be found in the packaging or on the product's dedicated support page online.