Gebruiksaanwijzing Dasqua 220° digitale hoekmeter/gradenboog

1. Inleiding

This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.

2. Product voorbijview

The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.

2.1 Belangrijkste kenmerken

Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
Vergrendelingsmechanisme: Ensures angles are securely held for transfer.
Dubbele waterpas: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
LCD-scherm met achtergrondverlichting: 0.1° resolution display for clear visibility in various lighting conditions.
Duurzame constructie: IP54 waterproof housing, resistant to dust, water, and oil.

2.2 Componenten

Diagram showing the components of the Dasqua Digital Angle Finder Protractor, including aluminum material, horizontal bubble, extension plate, vertical bubble, backlit LCD display, and lock knob. — Figure 1: Product Components. This diagram illustrates the main parts of the angle finder, including the aluminum body, horizontal and vertical bubble levels, the extendable leg, the backlit LCD screen, and the locking knob.

Hoofdtekst: Houses the digital display and primary measuring arm.
Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
Lock Knob: Secures the sliding leg at a desired angle.
LCD-scherm: Shows digital angle readings and mode indicators.
Bedieningsknoppen: (On-Off, Hold, 180°, MTR, COM) for various functions.
Bellenniveaus: One horizontal and one vertical for traditional leveling.

3. Instellen

3.1 Batterij installatie

The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:

Locate the battery compartment cover, typically on the side or back of the main body.
Open het deksel.
Plaats twee AA-batterijen en let op de juiste polariteit (+/-).
Sluit het batterijklepje goed.

The bubble levels operate mechanically and do not require batteries.

3.2 Eerste inschakeling

Druk op de Aan-Uit button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.

4. Gebruiksaanwijzing

Close-up of the Dasqua Digital Angle Finder's control panel, showing buttons for MTR, COM, Hold, 180 degrees, and On-Off/Zero Setting, along with the backlit LCD display. — Figure 2: Control Buttons. This image highlights the functions of each button on the device: MTR (Simple Miter Mode), COM (Compound Bevel Cutting Mode), Hold (Data Hold), 180° (Supplementary Angle Display), and the On-Off/Zero Setting Key.

4.1 Basishoekmeting

Schakel het apparaat in.
Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
Adjust the sliding leg until it aligns perfectly with the second surface.
Read the angle directly from the backlit LCD display.
Use the lock knob to secure the angle for transfer if needed.

4.2 MTR (Simple Miter) Mode

Druk op de MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.

4.3 COM (Compound Bevel Cutting) Mode

Druk op de COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.

4.4 Hold-functie

Druk op de Uitstel button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Uitstel again to release the reading.

4.5 180° Supplementary Angle Display

Druk op de 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.

4.6 Nulinstelling

To set the current position as the zero reference, fully close the angle finder and press the Aan-Uit button briefly. The display will reset to "0.0". This allows for relative angle measurements.

4.7 Using the Bubble Levels

A person using the Dasqua Digital Angle Finder Protractor to check a horizontal surface, showing the horizontal bubble level and the digital display. — Figure 3: Horizontal Leveling. The image demonstrates using the horizontal bubble level to ensure a surface is perfectly flat. Note that the digital display does not show a numerical value for the bubble level.

A person using the Dasqua Digital Angle Finder Protractor to check a vertical surface, showing the vertical bubble level and the digital display. — Figure 4: Vertical Leveling. This image shows the tool being used to verify a vertical alignment using its integrated vertical bubble level. The digital display provides angle readings, but not for the bubble level itself.

The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.

5. Onderhoud

Schoonmaak: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp Een doek kan worden gebruikt. Vermijd schurende reinigingsmiddelen of oplosmiddelen.
Opslag: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
Batterij vervangen: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
IP54-classificatie: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.

6. Probleemoplossing

Probleem	Mogelijke oorzaak	Oplossing
Het scherm is leeg of donker.	Lege batterijen, verkeerde installatie van de batterijen.	Vervang de batterijen door nieuwe AA-batterijen en let daarbij op de juiste polariteit.
Inaccurate angle readings.	Device not properly zeroed; obstruction; damaged sensor.	Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support.
Sliding leg does not lock securely.	Lock knob not tightened sufficiently; debris in mechanism.	Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism.

7. Specificaties

Diagram illustrating the measuring range and dimensions of the Dasqua Digital Angle Finder Protractor, showing a 0-220 degree range, +/- 0.2 degree accuracy, and dimensions of 425mm x 58mm x 41mm. — Figure 5: Measuring Range and Dimensions. This graphic details the operational range of the angle finder (0-220 degrees), its accuracy (±0.2 degrees), and its physical dimensions (425mm length, 58mm width, 41mm height).

Meetbereik: 0-220°
Nauwkeurigheid: ±0.2°
Oplossing: 0.1°
Sliding Leg Length: 425 mm
Bubble Level Accuracy: 1.5mm / m
Energiebron: 2 x 1.5V LR6 (AA) batteries (for digital display)
Materiaal: Aluminium
Beschermingsklasse: IP54 (Stof- en spatwaterbestendig)
Artikelgewicht: 1.28 pond
Pakket afmetingen: 17.87 x 9.17 x 1.77 inch

8. Garantie en ondersteuning

Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.

Voor verdere hulp kunt u terecht op de Dasqua Store on Amazon.

	Productinstructies voor de Dasqua digitale hoekliniaal Uitgebreide instructies voor de Dasqua digitale hoekliniaal, met informatie over functies, kenmerken, onderhoud, probleemoplossing en bedieningsmodi zoals NORMAAL, KROON en CUS.
	Gebruiksaanwijzing voor Dasqua schuifmaat/meetklok Gebruiksaanwijzing voor Dasqua schuifmaten en klokschuifmaten, met informatie over de constructie, het aflezen van maten, algemeen gebruik, speciaal gebruik van schuifmaten, voorzorgsmaatregelen en probleemoplossing.
	Dasqua IP67 digitale schuifmaat Productinstructies en gebruiksaanwijzing Uitgebreide productinstructies voor de Dasqua IP67 digitale schuifmaat. Deze handleiding bevat prestatierichtlijnen, veiligheidsmaatregelen, gedetailleerde specificaties, gebruiksinstructies, batterijvervanging, probleemoplossing en de juiste afvoermethoden voor een nauwkeurige en veilige werking.
	Dasqua IP65 waterdichte digitale buitenmicrometer: productinstructies Uitgebreide productinstructies voor de Dasqua IP65 waterdichte digitale buitenmicrometer, met informatie over gebruik, structuur, knoppen, batterij, probleemoplossing en voorzorgsmaatregelen.
	Dasqua digitale buitenmicrometer: productinstructies en specificaties Gedetailleerde productinstructies en specificaties voor de Dasqua digitale buitenmicrometer, met informatie over de structuur, toetsen, LCD-scherm, bediening, stroomvereisten, veiligheidsmaatregelen en een handleiding voor probleemoplossing.
	Dasqua Precision Digitale Schuifmaat: Gebruiksaanwijzing & Instructies Uitgebreide handleiding voor Dasqua digitale schuifmaten, met informatie over gebruik, veiligheid, specificaties, probleemoplossing en het vervangen van de batterij. Leer hoe u uw Dasqua digitale schuifmaat bedient en onderhoudt voor nauwkeurige metingen.

Dasqua Digital Angel Finder Procractor