Gebruikershandleiding voor de Dasqua 8400-0020 digitale nivelleerbak

Invoering

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your Dasqua 8400-0020 Digital Levelling Box. Please read this manual thoroughly before using the device to ensure proper handling and to prevent damage or injury.

Veiligheidsinstructies

Algemene veiligheidsmaatregelen:

• Always handle the device with care to avoid dropping or impact, which can affect its accuracy.
• Keep the device away from strong magnetic fields, except for its integrated magnet, to prevent interference with internal components.
• Stel het apparaat niet bloot aan extreme temperaturen, vochtigheid of direct zonlicht.
• Reinig het apparaat met een zachte, droge doek. Gebruik geen schuurmiddelen of oplosmiddelen.
• Dit apparaat is niet waterdicht. Vermijd contact met vloeistoffen.
• Buiten bereik van kinderen houden.

Product voorbijview

The Dasqua 8400-0020 is a compact digital levelling box designed for precise angle measurements. It features a clear digital display, intuitive controls, and a magnetic base for secure attachment to ferrous surfaces.

Componenten en bedieningselementen

Figure 1: Dasqua 8400-0020 Digital Levelling Box. This image shows the front face of the device, highlighting the digital display, control buttons, and a warning label for the magnetic base.

• 1. Digitaal display: Shows angle readings in degrees, absolute (ABS) or relative (REF) mode, and battery indicator.
• 2. ON/OFF REF Button: Powers the unit on or off. Also used to set a relative zero point (REF).
• 3. MODE-knop: Switches between absolute (ABS) and relative (REF) measurement modes.
• 4. HOLD Button: Bevriest de huidige meting op het display.
• 5. Magnetic Base: Located on the bottom of the unit, allows for secure attachment to metal surfaces for hands-free operation.

Instellen

Before first use, ensure the device has sufficient power. The Dasqua 8400-0020 typically uses standard AAA batteries. Open the battery compartment, insert batteries with correct polarity, and close the compartment securely.

Batterij installeren:

1. Locate the battery compartment cover on the back or side of the unit.
2. Open het deksel.
3. Insert [Number] AAA batteries (not included) observing the correct polarity (+/-).
4. Sluit het batterijklepje goed.

Note: The exact battery type and quantity should be confirmed from the product packaging or device itself.

Gebruiksaanwijzing

1. Aan/uit:

Druk op de ON/OFF REF button to turn the device on. Press and hold the ON/OFF REF Houd de knop een paar seconden ingedrukt om het apparaat uit te schakelen.

2. Absolute Measurement (ABS Mode):

When the device is powered on, it typically defaults to Absolute (ABS) mode. In this mode, the display shows the angle relative to a true horizontal (0°) or vertical (90°) plane. The "ABS" indicator will be visible on the display.

3. Relative Measurement (REF Mode):

To measure an angle relative to a specific surface (e.g., to find the difference between two angles), use the Relative (REF) mode:

1. Place the device on the first surface you wish to set as your reference.
2. Druk op de ON/OFF REF button briefly. The display will show "0.00°" and the "REF" indicator will appear, indicating that this position is now your zero reference.
3. Move the device to the second surface. The display will now show the angle difference between the first and second surfaces.
4. To exit REF mode and return to ABS mode, press the MODUS knop.

4. Hold-functie:

Druk op de UITSTEL button to freeze the current reading on the display. This is useful when taking measurements in hard-to-see areas. Press the UITSTEL Druk nogmaals op de knop om de meting te stoppen en de live meting te hervatten.

5. Calibration (Self-Calibration):

For optimal accuracy, it is recommended to perform a self-calibration periodically or if you suspect the readings are inaccurate. Refer to the device's specific instructions for calibration, which usually involves placing the unit on a flat, level surface and following a sequence of button presses.

Note: Consult the manufacturer's full instructions for detailed calibration procedures if available.

Onderhoud

Schoonmaak:

Wipe the device with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or solvents. Ensure no dust or debris accumulates around the display or buttons.

Opslag:

When not in use, store the digital levelling box in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the device.

Probleemoplossing

Specificaties

Garantie en ondersteuning

For warranty information and technical support, please contact Dasqua customer service or refer to the official Dasqua webwebsite. Bewaar uw aankoopbewijs als bewijs van aankoop voor eventuele garantieclaims.

Manufacturer: Dasqua