Meross MS600 Matter Human Presence Sensor Gebruiksaanwijzing

1. Inleiding

The meross MS600 Matter Human Presence Sensor is an advanced 3-in-1 device integrating Passive Infrared (PIR), millimeter-wave (mmWave) radar, and a light sensor. Designed for smart home automation, it accurately detects human presence, motion, and ambient light levels. This sensor supports multiple ecosystems through the Matter framework, including HomeKit, Alexa, Google Home, and Home Assistant, offering enhanced stability, lower latency, and improved privacy for your smart home.

2. Inhoud van het pakket

• Presence Sensor X1
• Power Cord (1.5m) X1
• Pet-proof Shield X1
• Double-sided Tape X1
• Gebruiksaanwijzing X1

3. Product voorbijview

The MS600 sensor combines three detection technologies for comprehensive environmental monitoring:

• Millimeter-wave Radar: Detects subtle human presence, even when stationary, by sensing micro-movements like breathing.
• Passieve infrarood (PIR): Detects larger movements and heat signatures.
• Lichtsensor: Measures ambient light levels (in Lux) to enable light-aware automations.

The device features a 360° adjustable bracket for flexible positioning and integrated cable management for a tidy installation.

Afbeelding 3.1: Ontploft view diagram showing the PIR Motion Sensor Lens, Light Sensor, PIR, Type-C Power Port, Adjustable Bracket, and Millimeter-wave Radar Emission Area of the meross MS600 sensor.

The MS600 is designed with privacy in mind, offering no video or audio recording capabilities.

Afbeelding 3.2: Diagram highlighting the privacy features of the meross MS600 sensor, indicating 'No Video Recording' and 'No Audio Recording'.

4. Installatiehandleiding

4.1 fysieke installatie

1. Maak het schema klaar: Open the adjustable bracket using the notch on the back for multi-angle adjustment.
2. Netsnoer aansluiten: Insert the USB-C power cord into the sensor. If the sensor is upright, extend the power cord from the bottom. The bracket's cable groove helps streamline power cord organization in any direction.
3. Montage: Use the provided double-sided tape to attach the bracket to a clean surface. Press firmly for 60 seconds to ensure a strong bond.
4. Optimale plaatsing: For best results, position the sensor upright and facing directly at chest height, approximately 1.2 to 1.8 meters (4 to 6 feet) above the ground. This helps improve detection accuracy, especially in areas where you typically sit or stay for extended periods.
5. Vermijd interferentie: Do not install the sensor directly facing air vents, fans, curtains, plants, or anything else that might cause unintended movement, to ensure accurate radar detection.
6. Pet-Proof Shield: If you have pets, place the pet-proof shield in front of the sensor lens. The double-sided tape on the shield can help secure it. This blocks heat detection from lower areas, minimizing false triggers from pets or robot vacuums.

Afbeelding 4.2: Diagram illustrating the detection range of the meross MS600 sensor, with presence detection up to 6 meters and motion detection up to 12 meters. It also shows optimal mounting height and angle.

4.2 App-installatie en koppeling

It is recommended to use the meross app to complete the initial setup process. meross's unique 'Space Learning' and 'Detection Range Calibration' features enable the sensor to make more precise detections, providing a user experience that better fits the current environment.

1. Download de Meross-app: Download and install the meross app from your device's app store.
2. Apparaat toevoegen: Open the meross app, tap the '+' icon in the top right corner of the home screen.
3. Selecteer sensor: Scroll down and select "Smart Sensor and Alarm", then choose "MS600" to start the pairing process.
4. Inschakelen: Ensure the sensor is powered on. The LED will slowly flash amber and green.
5. Kwestie van koppelen: Follow the on-screen instructions to scan the Matter QR code (located on the device or packaging) or manually enter the setup code.
6. Volledige installatie: Follow the remaining prompts to name your sensor and assign it to a room.

4.3 Calibration (Space Learning & Detection Range)

After initial pairing, it is crucial to calibrate the sensor for optimal performance in your specific environment.

1. Access Calibration: In the meross app, tap on your MS600 sensor on the home page, then navigate to the installation calibration section.
2. Space Learning: This feature enhances accuracy by automatically detecting environmental interferences (like air conditioners, fans, curtains, plants) and adjusting trigger baselines to reduce disruptions from reflections. Ensure the room is vacant during this process.
3. Detection Range Calibration: This allows you to test the sensor's radar waves to ensure it detects activity and prolonged stillness as anticipated. A green light indicates motion detection, an amber light shows slight movement, and no light means no motion. Adjust the device's placement accordingly if detection is not optimal.

5. Gebruiksaanwijzing

5.1 Detectiemodi

The MS600 offers different modes to suit various needs:

• Biological Detection Only Mode: The sensor assesses targets using heat and motion. This mode is ideal for reducing false triggers from non-human movements (e.g., pets, robot vacuums) when the pet-proof shield is installed.
• Beveiligingsmodus: This mode detects both heat changes and movement, increasing sensitivity but potentially leading to more false triggers from environmental factors.

5.2 Automation Setup

The sensor can be used to trigger various automations within the meross app or integrated smart home platforms:

• Voorwaarden: Automations can be triggered based on:
  • Presence/Absence detection
  • Target distance (approaching/departing)
  • Illuminance levels (brightness of the room in Lux)
• Acties: The sensor can trigger actions on other smart devices, such as turning lights on/off, adjusting thermostats, or activating alarms.
• Time Triggers: Automations can be set to run at specific times or all the time, or within custom time periods (e.g., from sunrise to sunset).

Afbeelding 5.1: Diagram illustrating that the meross MS600 sensor requires a Matter hub for compatibility with platforms like HomeKit, Amazon Alexa, and Google Home.

5.3 Gevoeligheidsinstellingen

Adjust the detection sensitivity in the meross app to best suit your usage scenario:

• Responsive Mode: Detects minor motion but may increase false detections. Recommended for bedroom sleep scenes or when detecting stationary targets at a distance of 4.5-6 meters from the sensor.
• Balansmodus: Suitable for most everyday scenes. Recommended for use in study rooms, living rooms, and similar environments.
• Anti-Interference Mode: Insensitive to minor motion, effectively reducing false detection rates. Recommended for complex multi-person environments or areas with plants and curtains.

6. Onderhoud

• Schoonmaak: Gently wipe the sensor lens and body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Firmware-updates: Regularly check the meross app for firmware updates to ensure optimal performance and access to new features.

7. Probleemoplossing

• Connectiviteitsproblemen: Ensure your device is covered by a strong 2.4GHz Wi-Fi network. Reset the device and restart the installation process if needed. Make sure your phone's Bluetooth is enabled and permissions are granted to the meross app.
• Valse triggers: Review the installation location to ensure it avoids air vents, fans, curtains, or plants. Adjust the detection sensitivity mode in the app. Consider using the pet-proof shield if pets are present.
• Geen detectie: Verify the sensor is powered on and properly calibrated. Check the detection range settings in the app. Ensure no objects are obstructing the sensor's field of view.
• Materiecompatibiliteit: A hub is required for Matter compatibility. Ensure your Matter hub is properly set up and connected.

8. Specificaties

9. Garantie en ondersteuning

meross is committed to providing reliable products and excellent customer service.

• Technische ondersteuning: 7*24 Hours Technical support is available.
• Garantie: The product comes with a 1-year unconditional warranty.
• Levenslange ondersteuning: Enjoy lifetime technical support for your meross device.

Afbeelding 9.1: Visual representation of meross support services, including 7*24 hours technical support, 1-year unconditional warranty, and lifetime technical support. Also highlights meross's user base and global availability.