Belangrijke veiligheidsinformatie
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Zorg ervoor dat alle schroeven en bouten goed vastgedraaid zijn voordat u het apparaat gebruikt.
- Ga niet op de stoel staan.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Inhoud van het pakket
Controleer vóór de montage of alle onderdelen aanwezig en onbeschadigd zijn. Als er onderdelen ontbreken of beschadigd zijn, neem dan contact op met de klantenservice.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Montage-instructies
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Componenten uitpakken: Haal alle onderdelen voorzichtig uit de verpakking en leg ze klaar.
- Bevestig de wielen aan de basis: Steek de wieltjes in de gaten aan het uiteinde van elke poot van de stoelbasis. Duw stevig aan tot ze vastklikken.
- Gaslift invoegen: Plaats de gasliftcilinder in het middelste gat van het onderstel van de stoel.
- Monteer het zitmechanisme: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Armleuningen bevestigen: Bevestig de armleuningen aan het zitkussen met behulp van de daarvoor bestemde schroeven.
- Rugleuning aan zitting bevestigen: Attach the backrest to the seat assembly.
- Bevestig de stoelconstructie aan de gasveer: Plaats de gemonteerde zitting en rugleuning voorzichtig op de gasliftcilinder.
- Bevestig de hoofdsteun: Slide the headrest into the slots at the top of the backrest.
- Laatste controle: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Gebruiksaanwijzing
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Zithoogteverstelling
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Ligfunctie
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Hoogteverstelling: Push the lumbar support up or down.
- Diepte aanpassing: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Afbeelding: Gedetailleerd view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Armsteunverstelling
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Afbeelding: View of the armrest, indicating the mechanism for height adjustment.
Onderhoud
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Schoonmaak:
- Voor gaas- en stoffen oppervlakken gebruikt u een zachte doek.ampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp lap.
- Do not saturate the chair with water.
- Inspectie: Controleer regelmatig of alle schroeven en bouten goed vastzitten. Draai ze indien nodig opnieuw vast.
- Wielen: Zorg ervoor dat er geen haar of vuil op de wielen zit, zodat de wielen soepel kunnen bewegen.
- Gas lift: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Probleemoplossing
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Stoel is niet in hoogte verstelbaar | Gaslift defect of hendel niet ingeschakeld. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| De stoel wiebelt of is instabiel. | Losse schroeven of een ongelijkmatige montage. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Wielen rollen niet soepel | Vuil blijft vastzitten in de wielen. | Clean any hair, dust, or debris from the caster wheels. |
| Rugleuning kan niet worden gekanteld of vergrendeld | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Specificaties
| Functie | Detail |
|---|---|
| Merk | hbada |
| Modelnummer | P2 |
| Kleur | Wit |
| Totale hoogte | 105.5 - 126.5 cm (41.5 - 49.8 inch) |
| Basisbreedte | 70 cm (27.6 inch) |
| Zitbreedte | 51 cm (20.1 inch) |
| Zitdiepte | 52 cm (20.5 inch) |
| Zithoogtebereik | 40 - 48 cm (15.7 - 18.9 inch) |
| Artikelgewicht | 43 pond |
| Achterkant Stijl | Mesh-rug |
| Vulmateriaal | Geheugenschuim |
| Liggende posities | 3 (90°, 110°, 135°) |
| Lendensteun | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Hoofdsteun | 2D Adjustable (Height, 40° Swivel) |
| Armleuningen | Height Adjustable (7.5 cm / 3 inches range) |
| Maximale draagkracht | 264 pond |
Garantie en klantenondersteuning
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Garantie: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Retourneren: U kunt het product binnen 30 dagen gratis retourneren.
- Price Match: A 15-day price match guarantee is offered.
- Klantenservice: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada webwebsite voor contactgegevens.
