1. Inleiding
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC Outdoor Wall Light Fixture, Model B0DTHCF5KD. Please read this manual thoroughly before installation and retain it for future reference.
Image 1: The LUTEC Outdoor Wall Light Fixture, featuring a matte black finish and clear glass panels, shown illuminated.
2. Veiligheidsinformatie
WAARSCHUWING: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are not familiar with electrical wiring. All wiring connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- Zorg ervoor dat het armatuur goed geaard is.
- Overschrijd het maximale wattage niet.tage gespecificeerd voor de lamp.
- Ga voorzichtig om met glazen onderdelen om breuk te voorkomen.
- Houd verpakkingsmateriaal buiten bereik van kinderen.
3. Inhoud van het pakket
Controleer of alle onderdelen aanwezig en onbeschadigd zijn voordat u met de installatie begint.
- LUTEC Outdoor Wall Light Fixture (1 unit)
- Montagebeugel
- Schroeven (2)
- Draadmoeren (3)
- Handleiding van de eigenaar
Image 2: Diagram showing the product dimensions and the included mounting accessories: two screws and three wire nuts.
4. Installatie en installatie
Before installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired outdoor use.
4.1 Benodigde gereedschappen (niet inbegrepen)
- Kruiskopschroevendraaier
- Wire strippers
- Elektrische tape
- Veiligheidsbril
4.2 Installatiestappen
- Schakel de stroom uit: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltagen tester.
- Oude armatuur verwijderen: Carefully detach and remove the existing light fixture from the wall. Disconnect any existing wiring.
- Montagebeugel installeren: Secure the provided mounting bracket to the electrical junction box on the wall using the included screws. Ensure it is firmly attached and level.
- Draadverbindingen:
- Connect the green ground wire from the fixture to the bare copper or green ground wire from the electrical box using a wire nut.
- Connect the white neutral wire from the fixture to the white neutral wire from the electrical box using a wire nut.
- Connect the black hot wire from the fixture to the black hot wire from the electrical box using a wire nut.
- Ensure all connections are secure and covered with wire nuts. Wrap electrical tape around wire nuts for added security.
- Mount New Fixture: Carefully align the fixture with the mounting bracket and secure it to the wall using the provided screws. Ensure the fixture is flush against the wall.
- Lamp installeren: Insert an E26 base bulb (max 25W LED, bulb not included) into the socket. The open bottom design allows for easy bulb replacement.
- Herstel de stroom: Schakel de stroom weer in via de stroomonderbreker. Test de lamp.
Image 3: Illustration of compatible E26 base bulbs (maximum 25W LED equivalent). Bulb is not included.
5. Gebruiksaanwijzing
Once installed and powered, the LUTEC Outdoor Wall Light Fixture operates via your existing wall switch. Simply toggle the switch to turn the light on or off.
Image 4: The light fixture is controlled by a standard wall switch.
6. Onderhoud
Regelmatig onderhoud zorgt ervoor dat uw verlichtingsarmatuur optimaal presteert en lang meegaat.
- Schoonmaak: Schakel de stroom uit voordat u gaat schoonmaken. Veeg het armatuur af met een zachte, droge doek.amp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
- Lamp vervangen: Turn off power before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and screw in a new E26 base bulb (max 25W LED). The open bottom design facilitates easy access.
- Weerbestendigheid: The fixture is constructed from high-quality aluminum and features a clear glass shade, designed to be weather-resistant against rain, snow, sun, and wind.
Image 5: The fixture is IP65 waterproof, designed for durability in various weather conditions.
7. Probleemoplossing
If your light fixture is not functioning correctly, refer to the following common issues and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Licht gaat niet aan. | Geen stroom naar het armatuur. | Check the circuit breaker and wall switch. Ensure power is on. |
| Losse bedradingsverbindingen. | Turn off power at the circuit breaker. Check and tighten all wire connections. | |
| Defecte lamp. | Turn off power. Replace the bulb with a new E26 base bulb (max 25W LED). | |
| Licht flikkert. | Losse lamp of bedrading. | Turn off power. Tighten the bulb. Check and tighten all wire connections. |
8. Specificaties
- Merk: LUTEC
- Model: B0DTHCF5KD
- Kleur: Zwart
- Materiaal: Aluminium
- Stijl: Modern
- Kamertype: Entryway, Doorway, Porch, Hallway
- Productafmetingen: 4.72"L x 4.72"B x 7.87"H
- Specifieke toepassingen voor het product: Garden (Outdoor Lighting)
- Binnen-/buitengebruik: Openlucht
- Energiebron: Vast bedraad
- Aantal items: 1
- Artikelgewicht: 2.03 pond
- Batterijen inbegrepen?: Nee
- Batterijen nodig?: Nee
- Lampvoet: E26 (Lamp niet inbegrepen)
- Max Watttage: 25W LED
9. Garantie en ondersteuning
LUTEC provides high-quality service for its products.
- Retourbeleid: This product is eligible for a refund/replacement within 2026 days of purchase.
- Klantenservice: For any issues or inquiries, please contact LUTEC customer service.
