Belangrijke veiligheidsinformatie
Always assemble the greenhouse with at least two people. Anchor the greenhouse securely to prevent it from being blown over in winds stronger than 17.5 mph. Be cautious of sharp edges during assembly and use. Avoid prolonged exposure to sunlight to minimize UV risk.
Product voorbijview
The Outsunny Lean-to Greenhouse is designed for outdoor use, providing a protected environment for your plants. It features a sturdy frame, a UV-resistant PE cover, and convenient access points.
Image: The Outsunny Lean-to Greenhouse positioned against a brick wall, showcasing its compact design and internal space for plants.
- Upgraded Frame: Features a central reinforcement structure for enhanced stability and multiple support rods for quick rainwater runoff.
- UV-resistant PE Cover: Protects plants from UV scorching while allowing 85% of nourishing sunlight. The cover is anti-aging and includes reinforcement hemmed edging to prevent tearing.
- Roll-up Doors and Windows: Equipped with a large, zippered roll-up door for easy access and mesh windows to keep out pests while allowing cross-ventilation.
- Lean-to-ontwerp: Maximizes corner space when placed against a wall, offering shelter from wind and high vertical space for climbing plants.
Afbeelding: Een gedetailleerde view of the PE cover, illustrating its anti-UV coating, bird-proof, tear-proof, and heat preservation properties, along with reinforced hemming.
Installatie-instructies
Assembly of this greenhouse is recommended for two people. Follow these steps for proper setup and stability.
- Componenten uitpakken: Carefully remove all parts from the packaging and verify against the parts list (not provided in this manual, refer to original packaging).
- Frame monteren: Connect the alloy steel poles using the plastic joints. Ensure the central reinforcement structure and multiple support rods for the pent roof are correctly installed for stability and rainwater runoff.
Image: The greenhouse frame highlighting the middle reinforcement structure and multiple support rods designed for enhanced stability.
- Attach PE Cover: Drape the UV-resistant PE cover over the assembled frame. Ensure the cover is properly aligned and secured to the frame using the integrated ties or fasteners.
- Vastzetten op de grond: For optimal stability, bury the extended edge of the cover approximately 3.9 inches deep into the soil. Additionally, tighten the guy ropes and secure them with ground stakes. This prevents wind damage and improves sealing.
Image: Visual guide demonstrating how to bury the 3.9-inch extended edge of the greenhouse cover into the soil and how to properly pull and secure guy ropes with ground stakes for stable standing.
- Positionering: For a lean-to setup, place the greenhouse against a sturdy wall to maximize space and provide additional wind protection.
Image: The lean-to greenhouse installed against a white wall, demonstrating its space-saving design and how it can be secured.
Gebruiksaanwijzing
Een goede bediening zorgt ervoor dat uw planten optimale groeiomstandigheden hebben.
- Ventilatie: Utilize the large, zippered roll-up door and mesh windows to control temperature and humidity. Open them during warmer periods to allow cross-ventilation and prevent overheating. Close them during cooler periods or at night to retain heat.
Image: The greenhouse with its roll-up door and mesh windows open, illustrating how they provide easy access and ventilation while keeping pests out.
- UV-bescherming: The UV-resistant PE cover is designed to protect plants from harmful UV rays while allowing sufficient sunlight for growth.
Afbeelding: Een close-up view of the roll-up door mechanism, showing how it can be secured in an open position for ventilation and access.
Onderhoud
Regular maintenance will extend the lifespan of your greenhouse.
- De hoes schoonmaken: Periodically clean the PE cover with mild soap and water to remove dirt and debris, ensuring maximum light penetration. Avoid harsh chemicals that could damage the material.
- Inspect Frame and Anchors: Regularly check the frame for any signs of damage or loosening. Ensure all ground stakes and guy ropes are securely fastened, especially after strong winds.
- Winterklaar maken: In areas with heavy snow or extreme cold, consider reinforcing the roof or temporarily disassembling the greenhouse to prevent structural damage. Clear snow accumulation promptly from the roof.
Probleemoplossing
Address common issues to maintain optimal performance.
- Broeikasinstabiliteit: If the greenhouse feels unstable or shifts in wind, ensure the extended edge is buried deep enough (approx. 3.9 inches) and that all guy ropes are tightly secured to ground stakes. Consider adding additional anchoring points in very windy locations.
- Waterplassen op het dak: Ensure the roof support rods are correctly installed and taut. The pent roof design is intended for runoff, but loose connections can cause pooling. Adjust the frame and cover tension as needed.
- Beschadigde of ontbrekende onderdelen: If any parts are damaged during assembly or found to be missing, contact Outsunny customer support for assistance.
Specificaties
Image: A diagram illustrating the overall dimensions of the greenhouse, including width, depth, and height, as well as door and window measurements.
| Functie | Detail |
|---|---|
| Modelnummer | 84H-202V00GN |
| Totale afmetingen | 78.7" B x 29.9" D x 66.9"/59.1" H |
| Deurafmetingen | 55.1" B x 61.8" H |
| Framemateriaal | Gelegeerd staal |
| Materiaal van de omslag | Polyethyleen (PE) |
| Artikelgewicht | 11 pond |
| Aantal deuren | 1 |
| Aantal ventilatieopeningen | 2 (Gaasvensters) |
| Speciale kenmerken | UV-resistant, Weather resistant |
| Binnen-/buitengebruik | Openlucht |
Garantie-informatie
For detailed warranty information, please refer to the documentation included with your purchase or contact Outsunny customer support directly. Warranty terms typically cover manufacturing defects but may not cover damage due to weather events or improper assembly.
Ondersteuningsinformatie
If you require further assistance, have questions about assembly, or need to report a problem, please contact Outsunny customer support. Contact details can typically be found on the product packaging or the official Outsunny webplaats.
