Gebruikershandleiding voor de XMARTO WNM810 10-kanaals H.265 4K UHD netwerkvideo-recorder

1. Product voorbijview

The XMARTO WNM810 is a 10-Channel H.265 4K UHD Network Video Recorder (NVR) designed for surveillance systems. It supports up to 10 cameras with resolutions up to 4K (8MP). This NVR features dual built-in WiFi routers, allowing it to receive and record camera feeds using its own bandwidth, thereby reducing strain on your home network. It also includes G3 Auto WiFi Relay technology to extend WiFi coverage for cameras.

The NVR supports various storage options including a 64GB SD card (included), a 2.5" SATA HDD/SSD (not included), and cloud storage services.

Figure 1: XMARTO WNM810 10-Channel NVR

2. Inhoud van het pakket

Controleer voordat u met de installatie begint of alle onderstaande artikelen in uw pakket zijn inbegrepen:

• (1) WNM810 WiFi NVR
• (1) 100-240V AC to 12V 2A DC Power Adapter
• (1) USB-muis
• (1) Gebruikershandleiding

Figure 2: Included items in the XMARTO WNM810 NVR package

3. Installatie en installatie

3.1 NVR Connections

Connect the NVR to your display and network using the following steps:

1. Stroomaansluiting: Connect the provided 12V 2A DC Power Adapter to the 'DC IN' port on the NVR and then plug it into a power outlet.
2. Muisverbinding: Sluit de USB-muis aan op een van de USB-poorten op de NVR.
3. Verbinding weergeven: Connect an HDMI cable from the NVR's 'HDMI output' port to your monitor or TV. Alternatively, use a VGA cable if your display supports it.
4. Netwerkverbinding: For initial setup or if you prefer a wired connection, connect an Ethernet cable from the NVR's 'LAN' port to your router. The NVR also features a second WiFi for its Internet connection, eliminating the need for a hardwired connection to your router for remote access.

Figure 3: NVR Rear Ports (DC IN, USB, HDMI, VGA, LAN, Reset, Antenna mounts)

3.2 Installatie van de harde schijf (optioneel)

The NVR supports a 2.5" SATA HDD/SSD for local storage. Follow these steps to install a hard drive:

1. Uitschakelen: Ensure the NVR is powered off and unplugged before opening the casing.
2. Deksel verwijderen: Carefully remove the NVR's cover by unscrewing the necessary screws.
3. Kabels aansluiten: Connect the SATA power and data cables from the NVR to your 2.5" SATA HDD/SSD.
4. Beveiligde schijf: Place the hard drive into the designated bay and secure it with screws.
5. Vervang de afdekking: Reattach the NVR's cover and secure it with screws.

Afbeelding 4: Intern view showing 2.5" SATA HDD/SSD dock

3.3 Camerakoppeling

The XMARTO WNM810 NVR is compatible with most XMARTO security cameras. Pairing cameras is straightforward:

1. For Cameras with Ethernet Port: Simply hardwire the camera to the NVR. In the NVR's Camera Management interface, search for the camera and select 'Match code' to pair.
2. For Cameras with Reset Buttons: Reset the camera by holding its reset button for 10 seconds. On the NVR's right-click menu, select 'Add Cam by WiFi'. The NVR will automatically pair the camera.

4. Gebruiksaanwijzing

4.1 Levend View en opname

Zodra de camera's gekoppeld zijn, kunt u view live feeds on your connected monitor. The NVR supports up to 10 channels, allowing you to monitor multiple cameras simultaneously. Recordings are managed through the NVR's interface, with options for continuous, event-triggered, or scheduled recording.

Figure 5: NVR with long-range WiFi capabilities

Afbeelding 6: Live-uitzending met meerdere camera's view on monitor and mobile devices

4.2 H.265+ videocompressie

The NVR utilizes H.265+ video compression technology. This advanced compression reduces video file sizes and stream bandwidth requirements, optimizing storage capacity and improving remote viewprestatie.

4.3 G3 Auto WiFi Relay

The integrated G3 Auto WiFi Relay (Dream Liner Technology) allows the system to automatically use closer cameras as WiFi repeaters for cameras located further away. This extends the overall WiFi coverage and ensures stable connections for all cameras.

4.4 Opslagopties

Recordings can be saved to the included 64GB SD card, an optional 2.5" SATA HDD/SSD, or to cloud storage services (subscription may be required).

Figure 7: Available storage options for the NVR

5. Onderhoud

5.1 Beheer van harde schijven

After installing a new hard drive, it is recommended to format it through the NVR's system settings to ensure proper recording functionality. Regularly check the hard drive status to prevent data loss.

5.2 firmware-updates

Periodically check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically available on the xmartO official webplaats.

6. Probleemoplossing

6.1 Camera Connection Issues

If a camera fails to connect or loses connection, ensure it is powered on and within range of the NVR's WiFi or a WiFi repeater camera. For initial pairing, temporarily connect the camera via Ethernet to the NVR to sync WiFi information. If your home WiFi signal is weak in certain areas, consider utilizing your home router's WiFi or a WiFi extender for cameras, rather than solely relying on the NVR's internal WiFi for those specific locations.

6.2 Geen video-uitvoer

Check all HDMI/VGA cable connections between the NVR and your display. Ensure the display input source is correctly selected. Verify the NVR is powered on and its status lights indicate normal operation.

7. Specificaties

8. Garantie en ondersteuning

For detailed warranty information, technical support, and further assistance, please refer to the official xmartO website or contact their customer service. The full user manual may contain additional troubleshooting steps and advanced configuration options.