1. Inleiding
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. Inhoud van het pakket
Controleer of alle componenten in het pakket aanwezig zijn:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- Opbergkoffer
- Warranty Letter
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. Belangrijkste kenmerken
- Oplossing: 0.0005-inch / 0.01mm for precise measurements.
- Standaardnaleving: Manufactured in accordance with DIN863 standards.
- Spindel: Hardened, ground, and lapped for enhanced accuracy.
- Veelzijdigheid: Designed to accommodate a broad range of measurement applications.
- Weergave: Large, digital display for clear and quick readings.
- Bouw: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- Nul-reset: Ability to reset to zero at any position for comparative depth measurements.
4. Installatie-instructies
4.1. Batterij installatie
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Locate the battery compartment cover on the back of the digital display unit.
- Gebruik een kleine schroevendraaier of een muntstuk om het deksel te openen.
- Plaats een nieuwe CR2032-batterij met de positieve (+) kant naar boven.
- Plaats het deksel van het batterijcompartiment veilig terug.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. Gebruiksaanwijzing
5.1. Aan/uit
- Druk op de AAN/UIT knop om het apparaat in te schakelen.
- Druk op de AAN/UIT button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- Druk op de mm/inch button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Zero Setting
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- Druk op de NUL button. The display will show '0.000' or '0.00'.
5.4. Een meting uitvoeren
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- De meting kan direct van het digitale display worden afgelezen.
5.5. Hold-functie
- Druk op de UITSTEL knop om de huidige waarde op het display vast te zetten.
- Druk op de UITSTEL Druk nogmaals op de knop om de meting te annuleren en terug te keren naar de live meting.
Afbeelding 5.1: Gedetailleerd view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. Onderhoud
6.1. Schoonmaken
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- Bij hardnekkig vuil, gebruik een doek om het lichtjes te deppen.ampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Zorg ervoor dat er geen vloeistof in de elektronische componenten terechtkomt.
6.2. Opslag
- Store the depth gage in its protective case when not in use.
- Keep the device in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Als u het apparaat voor een langere periode opbergt, verwijder dan de batterij om lekkage te voorkomen.
6.3. Batterij vervangen
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. Probleemoplossing
- Het scherm is leeg of donker:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - Onjuiste metingen:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - Knoppen reageren niet:
Check battery level. If the issue persists after battery replacement, contact customer support.
8. Productspecificaties
| Specificatie | Detail |
|---|---|
| Modelnummer | 4710-1205 |
| Meetbereik | 0-16 inch / 0-400 mm |
| Oplossing | 0.0005 inch / 0.01 mm |
| Nauwkeurigheid | 0.0015 inch / 0.03 mm |
| Materiaal | Gehard roestvrij staal |
| Energiebron | CR2032 Battery (typical) |
| Pakket afmetingen | 9 x 5 x 2 inch |
| Artikelgewicht | 12.8 ons |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. Garantie en ondersteuning
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webwebsite of klantenservicekanalen.
