LUTEC Solar Lights Outdoor 240 LED (2-Pack) Gebruiksaanwijzing

1. Inleiding

Thank you for choosing the LUTEC Solar Lights Outdoor 240 LED (2-Pack). These solar-powered floodlights are designed to provide efficient and reliable outdoor illumination, featuring a motion sensor and remote control for convenient operation. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your product.

2. Veiligheidsinformatie

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to maximize charging efficiency.
• Probeer het product niet te demonteren of aan te passen. Dit kan de garantie ongeldig maken en veiligheidsrisico's opleveren.
• Houd het product uit de buurt van vuur of extreme hittebronnen.
• Avoid submerging the light unit or solar panel in water. While designed for outdoor use, prolonged submersion can cause damage.
• Handle the lithium-ion batteries with care. Do not puncture or expose them to high temperatures.
• Installation should be performed on a stable surface. If unsure, consult a qualified electrician.

3. Inhoud van het pakket

Controleer of alle componenten in uw pakket aanwezig zijn:

• 2 x LUTEC Solar LED Light Units (240 LEDs each)
• 2 x Solar Panels with 5-meter connection cables
• 2 x afstandsbedieningen
• Mounting Screws and Wall Plugs (quantity may vary)
• Gebruiksaanwijzing (dit document)

4. Product voorbijview

The LUTEC Solar Lights consist of a main LED light unit with an integrated motion sensor and a separate solar panel connected by a 5-meter cable. This design allows for flexible placement of both components to optimize sunlight exposure and light coverage.

Figuur 4.1: Overview of the LUTEC Solar Lights and Remote Controls. Each unit includes an LED floodlight, a motion sensor, and a solar panel with a 5-meter cable for flexible installation. Two remote controls are also shown.

Belangrijkste componenten:

• LED-lichteenheid: Contains 240 bright LEDs and a passive infrared (PIR) motion sensor.
• Zonnepaneel: Charges the internal lithium-ion batteries during the day.
• 5-meterkabel: Connects the solar panel to the light unit, allowing for optimal placement.
• Afstandsbediening: Used to power on/off and select operating modes.

5. Installatie en installatie

Volg deze stappen voor een correcte installatie:

1. Choose a Location for the Solar Panel: Select an outdoor area that receives direct sunlight for at least 6-8 hours daily. Avoid shaded areas from trees, buildings, or other obstructions. The solar panel should be angled to maximize sun exposure.
2. Choose a Location for the Light Unit: Mount the LED light unit in the desired area for illumination, ensuring the motion sensor is facing the detection zone. The 5-meter cable provides flexibility for placement, allowing the light to be in a shaded area if the solar panel is in direct sun.
3. Monteer het zonnepaneel: Use the provided screws and wall plugs to securely mount the solar panel to a wall or other stable surface. Adjust the angle of the panel for optimal sun exposure.
4. Monteer de lichtunit: Securely mount the LED light unit using the provided screws and wall plugs. Ensure it is positioned to cover the desired area and that the motion sensor has a clear line of sight.
5. Sluit de kabel aan: Connect the 5-meter cable from the solar panel to the input port on the LED light unit. Ensure the connection is secure.
6. Initiële kosten: Allow the solar panel to charge the batteries for at least one full day (6-8 hours of direct sunlight) before initial use.

Figuur 5.1: Illustration of the solar panel and light unit connection. The 5-meter cable allows for flexible positioning of the solar panel in direct sunlight and the light unit in the desired illumination area.

6. Gebruiksaanwijzing

The LUTEC Solar Lights are operated using the included remote control. Ensure the remote control has working batteries (if applicable, usually pre-installed or included).

Figuur 6.1: Remote control for the LUTEC Solar Lights. It features ON/OFF buttons and three distinct operating modes.

Functies van de afstandsbediening:

• AAN-knop: Powers on the light unit.
• UIT-knop: Powers off the light unit.
• MODUS1: (Motion Sensor Mode) The light remains off until motion is detected, then illuminates at full brightness for a set duration (e.g., 15-30 seconds) before turning off.
• MODUS2: (Dim Light + Motion Sensor Mode) The light stays on at a dim brightness continuously from dusk to dawn. When motion is detected, it switches to full brightness for a set duration before returning to dim.
• MODUS3: (Constant Light Mode) The light turns on at a medium brightness from dusk to dawn, regardless of motion.

Opmerking: The specific duration for motion-activated lighting in MODE1 and MODE2 is pre-set and cannot be adjusted manually.

7. Onderhoud

• Het zonnepaneel schoonmaken: Veeg het zonnepaneel regelmatig af met een zachte, vochtige doek.amp doek om stof, vuil of gruis te verwijderen. Een schoon paneel zorgt voor maximale laadefficiëntie.
• Reinigen van de lichtunit: Clean the LED light unit and motion sensor lens with a soft, dry cloth. Avoid abrasive cleaners.
• Batterij vervangen: The internal lithium-ion batteries are designed for long-term use. If the light's performance significantly degrades over time, contact customer support for guidance on potential battery replacement or service. Do not attempt to replace batteries yourself unless explicitly instructed.
• Winterverzorging: In areas with heavy snow, ensure the solar panel is cleared of snow to allow for charging.

8. Probleemoplossing

9. Specificaties

• Merk: LUTEC
• Modelnaam: TK-6918401330-XL2pcs
• Lichtarmatuurvorm: Schijnwerper
• Aantal LED's: 240 per eenheid
• Energiebron: Op zonne-energie
• Batterijen: 2 lithium-ionbatterijen vereist (inbegrepen)
• Materiaal: Polycarbonaat
• Kleur: Zwart
• Productafmetingen: 19"L x 13"B x 17.7"H
• Artikelgewicht: 2.12 pond
• Meegeleverde componenten: Afstandsbediening
• Binnen-/buitengebruik: Openlucht
• Cable Length (Solar Panel to Light): 5 meter

Note: Product dimensions and item weight may refer to the package or combined units. Specifications are subject to change without notice.

10. Garantie en ondersteuning

LUTEC provides high-quality after-sales service. If you encounter any issues with your product, please do not hesitate to contact us. Our customer support team is available 7 days a week, 24 hours a day, to assist you.

For warranty claims or technical assistance, please refer to your purchase documentation or visit the official LUTEC webwebsite voor contactgegevens.