1. Inleiding
The APC Smart-UPS SMT750C is an Uninterruptible Power Supply (UPS) designed to provide reliable power and surge protection for critical electronic equipment. This unit offers 750VA/500W of line-interactive pure sine wave power, making it suitable for servers, storage systems, network closets, business VoIP setups, desktop computers, and retail POS systems. It features Automatic Voltage Regeling (AVR) om volume te corrigerentage fluctuations and a SmartConnect Ethernet Port for cloud-based remote monitoring. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your SMT750C UPS.
2. Veiligheidsinformatie
WARNING: Risk of electric shock. Refer to bottom of unit for warnings.
- Lees alle instructies zorgvuldig door voor installatie en gebruik.
- Deze UPS bevat interne batterijen en kan een risico op een elektrische schok opleveren, zelfs wanneer deze is losgekoppeld van de netvoeding.
- Do not open or disassemble the UPS. There are no user-serviceable parts inside except for the battery.
- Sluit de UPS uitsluitend aan op een geaard stopcontact.
- Do not use the UPS in direct sunlight, near heat sources, or in areas with excessive humidity.
- Ensure proper ventilation around the UPS. Do not block any ventilation openings.
3. Inhoud van het pakket
Controleer bij het uitpakken of alle artikelen aanwezig zijn:
- APC Smart-UPS SMT750C Unit
- 16GB USB 3.0 Drive
- Gebruikershandleiding (dit document)
- USB-communicatiekabel
- Stroomkabel
Image: Included 16GB USB 3.0 Drive. This USB drive provides additional storage or file overdrachtsmogelijkheden.
4. Product voorbijview
Voorpaneel
Afbeelding: Voor- en zijkant view of the APC Smart-UPS SMT750C. This image displays the compact tower design of the UPS unit.
- Aan/uit-knop: Regelt de hoofdvoeding naar de UPS.
- LCD-scherm: Provides real-time status information, load levels, battery charge, and estimated runtime.
- Navigatie knoppen: Used to scroll through display menus and adjust settings.
Achterpaneel
Image: Rear panel of the APC Smart-UPS SMT750C. This view highlights the various input/output ports, including NEMA 5-15R outlets, SmartConnect port, USB, and serial ports.
- NEMA 5-15R Outlets: Six outlets for connecting protected equipment.
- SmartConnect Ethernet Port: For cloud-based remote monitoring and management.
- USB-poort: For communication with a computer for graceful shutdown via PowerChute Serial Shutdown software.
- Seriële poort: Alternative communication port for graceful shutdown.
- SmartSlot: For optional Network Management Card (sold separately).
- Ingangsstroomsnoer: Connects the UPS to the utility power.
- Overbelastingsbeschermer: Resettable circuit breaker.
5. Instellen
5.1 Eerste batterijaansluiting
Before initial use, the internal battery must be connected. The unit is shipped with the battery disconnected for safety during transit.
- Plaats de UPS op een stabiele ondergrond.
- Locate the battery compartment cover, typically on the bottom or rear of the unit.
- Verwijder het deksel om bij de batterij te komen.
- Connect the red battery cable to the positive (+) terminal and the black battery cable to the negative (-) terminal. Ensure a secure connection.
- Plaats het batterijklepje terug.
5.2 Aansluiten op het elektriciteitsnet
- Plug the UPS power cord into a grounded 3-prong AC outlet.
- Laat de UPS minimaal 24 uur opladen voordat u belangrijke apparatuur aansluit, zodat de batterij volledig opgeladen is.
5.3 Apparatuur aansluiten
- Connect your critical equipment (e.g., computer, monitor, network devices) to the NEMA 5-15R outlets on the rear panel.
- For graceful shutdown capabilities, connect the provided USB cable from the UPS to your computer and install the PowerChute Serial Shutdown software (available for download from APC's webwebsite).
- For remote monitoring, connect an Ethernet cable to the SmartConnect port and follow the instructions for cloud-based setup.
6. Bediening
6.1 In-/uitschakelen
- To power on the UPS, press and hold the power button on the front panel until the unit beeps and the display illuminates.
- To power off the UPS, press and hold the power button until the unit beeps and the display turns off.
6.2 Automatisch voltage Regeling (AVR)
The SMT750C features AVR, which automatically corrects minor voltagHet systeem beschermt aangesloten apparatuur tegen spanningsschommelingen (spanningsdalingen en -pieken) zonder over te schakelen op batterijvoeding. Dit beschermt de aangesloten apparatuur tegen spanningsschommelingen.tage irregularities and extends battery life.
6.3 Werking van de batterijback-up
Tijdens een stroomstoringtage, the UPS will automatically switch to battery power, providing continuous power to connected equipment. The LCD display will show the estimated remaining runtime. When utility power returns, the UPS will automatically switch back to utility power and recharge its battery.
6.4 Remote Monitoring (SmartConnect)
The SmartConnect port allows for cloud-based remote monitoring of your UPS. This feature enables IT professionals and network administrators to:
- Monitor UPS status and performance.
- Firmware-upgrades uitvoeren.
- Conduct remote diagnostics.
- Receive proactive email notifications with recommended actions.
7. Onderhoud
7.1 Batterij vervangen
The internal battery is a user-replaceable component. When the battery reaches the end of its service life, the UPS will indicate a battery fault. To replace the battery:
- Ensure the UPS is powered off and disconnected from utility power.
- Verwijder het deksel van het batterijvak.
- Disconnect the battery cables (red and black).
- Carefully slide out the old battery.
- Insert a genuine APC replacement battery (model RBC154, sold separately).
- Connect the battery cables, ensuring correct polarity (red to positive, black to negative).
- Plaats het batterijklepje terug.
- Recycle the old battery responsibly.
7.2 Reinigen
Reinig de buitenkant van de UPS regelmatig met een zachte, droge doek. Gebruik geen vloeibare reinigingsmiddelen of spuitbussen. Zorg ervoor dat de ventilatieopeningen vrij zijn van stof en vuil.
8. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| UPS gaat niet aan | Batterij niet aangesloten of bijna leeg. | Ensure battery cables are connected. Plug UPS into AC outlet and allow to charge. |
| UPS piept continu | Overload or on battery power | Reduce connected load. Check utility power. |
| Battery symbol blinking | Battery needs to be flipped (initial setup) or is failing | For new units, ensure battery is correctly oriented and connected. For older units, consider battery replacement. |
| Geen stroom op stopcontacten | UPS is off, circuit breaker tripped, or utility power lost | Turn on UPS. Reset circuit breaker. Check utility power. |
9. Specificaties
- Model: SMT750C
- Uitgangsvermogen: 500 Watt / 750 VA
- Uitgangsaansluitingen: 6x NEMA 5-15R
- Ingangsaansluitingen: NEMA 5-15P
- Nominaal ingangsvolumetage: 120V
- Nominaal uitgangsvolumetage: 120V
- Batterijtype: Loodzuur
- Vormfactor: Toren
- Afmetingen (H x B x D): 6.34 inch (16.1 cm) x 5.43 inch (13.8 cm) x 14.53 inch (36.9 cm)
- Netto gewicht: 27.56 kg (12.5 pond)
- Kleur: Zwart
- Materiaal: Metaal
- Meegeleverde accessoires: 16GB USB 3.0 Drive
10. Garantie en ondersteuning
APC biedt een standaardgarantie voor dit product. Voor specifieke garantievoorwaarden kunt u de garantiekaart raadplegen die bij uw product is meegeleverd of de officiële APC-website bezoeken. website. For technical support, product registration, or to purchase replacement parts, please visit www.apc.com or contact APC customer service.
Protection plans are available for extended coverage. For example, a 3-Year Protection Plan is available.