Gebruikershandleiding voor de WOLFBOX 3000A draagbare auto-startbooster

1. Inleiding

Thank you for choosing the WOLFBOX 3000A Portable Car Jump Starter. This device is designed to provide a reliable and powerful solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

2. Veiligheidsinformatie

WARNING: Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Buiten bereik van kinderen houden.
• Dompel het product niet onder in water en stel het niet bloot aan regen.
• Gebruik het product niet in explosieve atmosferen, zoals in de aanwezigheid van ontvlambare vloeistoffen, gassen of stof.
• Start niet met een bevroren batterij.
• Zorg voor een goede polariteitsverbinding (rode clamp naar positieve, zwarte clamp (naar negatief) om vonken en schade te voorkomen.
• Sluit de positieve en negatieve cl . niet aanampsamen.
• If the product is damaged, do not use it. Contact customer service for assistance.
• Use only the provided jumper cables and accessories.
• Do not leave the jump starter connected to the vehicle battery after starting the vehicle.

Image: The WOLFBOX 3000A Jump Starter features a 10-Point Safety System, providing comprehensive protection against various electrical hazards during operation.

3. Inhoud van het pakket

Controleer of alle artikelen in uw pakket aanwezig zijn:

• WOLFBOX 3000A Jump Starter (MegaVolt16)
• Smart Jumper Cables with Battery Clamps
• USB-C naar USB-C oplaadkabel
• EVA-draagtas
• Gebruiksaanwijzing

Image: All components included in the WOLFBOX 3000A Jump Starter package.

4. Product voorbijview

Familiarize yourself with the different parts of your WOLFBOX 3000A Jump Starter:

Afbeelding: Voorzijde view of the WOLFBOX 3000A Jump Starter.

Image: Integrated Versatility - Key features and ports of the WOLFBOX 3000A Jump Starter.

• LCD-scherm: Geeft het batterijpercentage weertage, input/output status, and error messages.
• Aan/uit-knop: Turns the device on/off and cycles through LED light modes.
• Boost-knop: Activates boost mode for severely discharged batteries.
• LED-zaklamp: Provides illumination with multiple modes (lighting, SOS, strobe).
• PD65W USB-C In/Out Port: Voor het opladen van de starthulp en andere apparaten.
• QC3.0 USB-A Port: For charging other electronic devices.
• Aansluiting voor startkabels: Connects to the smart jumper cables.

5. De startbooster opladen

Before first use, fully charge the WOLFBOX 3000A Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Connect the provided USB-C to USB-C charging cable to the PD65W USB-C In/Out port on the jump starter.
2. Connect the other end of the USB-C cable to a 65W (or higher) USB-C power adapter (not included).
3. The LCD screen will display the charging status and battery percentage. The unit is fully charged when the screen shows 100%.

Note: A 65W fast charger can charge the jump starter to 80% in approximately 30 minutes.

Image: The jump starter's 65W USB-C port can quickly charge the unit itself or other electronic devices.

6. Gebruiksaanwijzing

6.1. Jump Starting a Vehicle (Normal Mode)

Zorg ervoor dat de starthulp minimaal 50% opgeladen is voordat u probeert een voertuig te starten.

1. Schakel het contact van uw voertuig en alle accessoires (koplampen, radio, enz.) uit.
2. Connect the blue end of the smart jumper cables to the jumper cable socket on the WOLFBOX 3000A Jump Starter. Ensure a firm connection.
3. Bevestig de rood (+) clamp aan op de positieve pool van de accu van uw voertuig.
4. Bevestig de zwart (-) clamp naar de minpool van de accu van uw voertuig.
5. Once connected, the jump starter's LCD screen should display "START" with a green light, indicating a correct connection and readiness to start.
6. Start de motor van uw voertuig.
7. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, dan de rode (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Normal Start Modes - Step-by-step guide for jump starting a vehicle.

6.2. Jump Starting a Vehicle (Boost Mode)

Use Boost Mode if your vehicle's battery is severely discharged (below 9V) and the jump starter does not automatically display "START" in normal mode.

1. Follow steps 1-4 from the Normal Jump Start procedure (connect clamps to battery and jump starter).
2. If the screen displays "LOW" or does not show "START", press and hold the Boost-knop on the jump starter for 2-3 seconds until the screen displays "START" with a green light.
3. Start de motor van uw voertuig binnen 30 seconden.
4. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, dan de rode (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Boost Start Modes - Step-by-step guide for jump starting a vehicle with a severely discharged battery.

6.3. De LED-zaklamp gebruiken

The integrated LED flashlight has three modes: constant light, SOS signal, and strobe light.

1. Houd de Aan/uit-knop for 3 seconds to turn on the flashlight (constant light mode).
2. Press the Power button once to cycle to SOS mode.
3. Press the Power button again to cycle to strobe mode.
4. Press the Power button a third time to turn off the flashlight.

Image: The 200-Lumen LED Flashlight provides illumination and emergency signaling.

6.4. Gebruik als draagbare powerbank

The WOLFBOX 3000A can charge various electronic devices via its USB ports.

• Connect your device's charging cable to either the PD65W USB-C Out port or the QC3.0 USB-A port on the jump starter.
• The jump starter will automatically begin charging your device. The LCD screen will indicate "OUT" status.
• Koppel uw apparaat los zodra het opladen voltooid is.

7. Onderhoud

Goed onderhoud zorgt voor een lange levensduur en optimale prestaties van uw starthulpapparaat.

• Opslag: Bewaar de starthulp op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
• Opladen: Recharge the unit every 3-6 months, even if not used, to maintain battery health. A fully charged unit can hold its charge for up to two years under moderate conditions.
• Schoonmaak: Use a dry, soft cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasives.
• Kabelonderhoud: Inspect jumper cables for any damage before each use. Store them neatly in the carrying case.

Image: The WOLFBOX 3000A Jump Starter features a 2-year standby capability, requiring periodic recharging for optimal performance.

8. Probleemoplossing

Image: The large screen display provides clear status indicators for easy troubleshooting.

9. Specificaties

10. Garantie en klantenondersteuning

WOLFBOX provides a comprehensive warranty and dedicated customer support for your product.

• Garantieperiode: 24 maanden vanaf de datum van aankoop.
• Dekking: This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
• Klantenservice: For any questions, issues, or warranty claims, please contact WOLFBOX customer service.
• E-mailadres: service@wolfbox.com
• Telefoon: +1 888 296 8399

Please have your purchase receipt and product model number (MegaVolt16) ready when contacting support.