1. Inleiding
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Legrand Arteor 572008 Intermediate Switch. Please read this manual thoroughly before installation and keep it for future reference.
The Legrand Arteor 572008 is a 10 Amp, 1-unit intermediate switch designed for controlling lighting circuits and other electrical loads from multiple points. Its modern square design and durable magnesium finish ensure both aesthetic appeal and long-lasting performance.
2. Veiligheidsinformatie
WAARSCHUWING: Risico op elektrische schokken. De installatie moet worden uitgevoerd door een gekwalificeerde elektricien in overeenstemming met alle lokale en nationale elektrische voorschriften.
- Schakel altijd de stroom uit bij de stroomonderbreker of zekeringkast voordat u de schakelaar installeert of onderhoudt.
- Zorg ervoor dat alle bedrading goed vastzit en goed geïsoleerd is.
- Do not exceed the specified electrical ratings (10 Amp).
- Dit product is uitsluitend bedoeld voor gebruik binnenshuis.
- Buiten bereik van kinderen houden.
3. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- 1 x Legrand Arteor 572008 Intermediate Switch (10A, 1 Unit, White)
Image 1: Legrand Arteor 572008 Intermediate Switch. This image shows the front view of the white square switch unit.
4. Specificaties
| Modelnummer | 572008 |
| Type | Tussenschakelaar |
| Huidige beoordeling | 10 Amp |
| Aantal eenheden | 1 Eenheid |
| Afmetingen (L x B x H) | 4.22x2.25x4.5cm |
| Gewicht | 90 gram |
| Kleur | Wit |
| Batterijen vereist | Nee |
5. Installatie en installatie
Before you begin, ensure the power supply to the circuit is OFF at the main breaker.
- De elektrische verdeeldoos voorbereiden: Ensure you have a standard single-unit electrical box installed in the wall.
- Identificeer bedrading: An intermediate switch requires specific wiring. Typically, you will have a live wire (L), a neutral wire (N), and two switched live wires (L1, L2) for multi-point control. Consult a wiring diagram for intermediate switches if unsure.
- Draden aansluiten:
- Connect the incoming live wire to the common terminal (often marked 'L' or 'COM').
- Connect the two traveler wires (from the first two-way switch) to the 'L1' and 'L2' terminals.
- Connect the two outgoing traveler wires (to the second two-way switch) to the remaining 'L1' and 'L2' terminals.
- Zorg ervoor dat alle verbindingen stevig en veilig zijn.
- Monteer de schakelaar: Duw de bedrade schakelaar voorzichtig in de elektrische doos. Bevestig hem met de meegeleverde schroeven.
- Frontplaat bevestigen: Snap or screw the decorative faceplate onto the switch mechanism.
- Herstel de stroom: Turn the power supply back ON at the circuit breaker.
- Testfunctionaliteit: Test the switch from all control points to ensure proper operation.
If you are unfamiliar with electrical wiring, it is highly recommended to seek assistance from a certified electrician.
6. Gebruiksaanwijzing
The Legrand Arteor 572008 Intermediate Switch operates as part of a multi-point lighting control system, typically used with two 2-way switches.
- AAN/UIT schakelen: Press the switch button to toggle the connected lighting circuit ON or OFF.
- Multi-Point Control: This intermediate switch allows you to control the same light(s) from three or more locations when combined with two 2-way switches. Each press of any connected switch will reverse the state of the light(s).
7. Onderhoud
The Legrand Arteor 572008 Intermediate Switch requires minimal maintenance.
- Schoonmaak: To clean the switch, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Inspectie: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.
8. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Het licht gaat niet aan/uit. | Er gaat geen stroom naar het circuit. Losse bedradingsverbinding. Defecte lamp. Verkeerde bedrading. | Controleer de stroomonderbreker. Schakel de stroom uit en controleer alle draadverbindingen. Vervang de lamp. Verify wiring against a standard intermediate switch diagram. Consult an electrician if needed. |
| Switch feels hot. | Overbelasting van het circuit. Losse verbinding. | Immediately disconnect power. Reduce the load on the circuit. Disconnect power and check all wire connections. If the problem persists, consult an electrician. |
| Switch reageert niet. | Interne fout. | Disconnect power and replace the switch. |
For issues not listed here or if solutions do not resolve the problem, contact Legrand customer support or a qualified electrician.
9. Garantie en ondersteuning
Legrand products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Legrand webplaats.
For technical support, replacement parts, or further assistance, please contact Legrand customer service through their official channels. Keep your model number (572008) and purchase date ready when contacting support.
Legrand-functionaris Webwebsite: www.legrand.com
