1. Inleiding
The Neoteck MT35 is a versatile 2-in-1 moisture meter designed for detecting moisture content in various materials, including wood and building materials. It features both a non-destructive pinless mode for quick scans of walls and a pin-type probe for precise measurements in wood and concrete. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your device.
The Neoteck MT35 Moisture Meter is suitable for various applications, including RV moisture detection, flooring installation, construction quality supervision, and firewood moisture measurement.
2. Veiligheidsinformatie
- Lees alle instructies voordat u het apparaat gebruikt.
- Probeer het apparaat niet uit elkaar te halen of aan te passen.
- Houd het apparaat uit de buurt van water en extreme temperaturen.
- When using the pin-type probe, exercise caution to avoid injury from the sharp pins.
- Bewaar het apparaat op een droge, veilige plaats wanneer u het niet gebruikt.
3. Inhoud van het pakket
Controleer of alle artikelen in uw pakket aanwezig zijn:
- 1x Neoteck MT35 Pinless Moisture Meter
- 1x Pin-type Sensor (Probe)
- 2x Replacement Probes
- 1x USB-C oplaadkabel
- 1x Wrench (for probe replacement)
- 1x Gebruiksaanwijzing
The package includes the main meter unit, pin-type sensor, replacement probes, charging cable, wrench, and user manual.
4. Apparaat voorbijview
The Neoteck MT35 features a clear color LCD display, intuitive buttons, and a robust design for reliable moisture detection.
The Neoteck MT35 Moisture Meter can operate in both pinless mode (for non-destructive scanning) and pin-type mode (with the external probe for precise measurements).
Belangrijkste componenten:
- Kleuren-lcd-scherm: Shows moisture readings, material type, battery status, and alarm indicators.
- Pinless Sensor: Located on the back of the device for non-destructive measurements.
- Pin-type Probe Port (Type-C): For connecting the external pin probe.
- Aan/uit-knop: Schakelt het apparaat in/uit.
- Pauzeknop: Bevriest de huidige meting op het display.
- Zet knop: Accesses settings and material selection.
- Pijltoetsen (omhoog/omlaag): Navigeer door menu's en pas instellingen aan.
- APO-knop: Activates/deactivates automatic power off.
- Backlight/Sound Button: Controls display backlight and audible alarm.
5. Instellen
5.1 Het apparaat opladen
The Neoteck MT35 is equipped with a rechargeable 1200mAh Lithium-ion battery. Before first use, fully charge the device.
- Connect the provided USB-C charging cable to the Type-C port on the side of the meter.
- Sluit het andere uiteinde van de kabel aan op een standaard USB-voedingsadapter (niet meegeleverd) of een USB-poort van een computer.
- The battery indicator on the LCD will show charging status. A full charge provides up to 10 hours of continuous use.
5.2 Attaching the Pin Probe
For precise, deep measurements, attach the pin-type probe.
- Locate the Type-C port on the bottom of the meter.
- Insert the Type-C connector of the pin-type probe into this port.
- Ensure the connection is secure. The device will automatically switch to pin-type mode once the probe is connected.
Connect the pin-type probe to the Type-C port. The device will automatically activate pin-type mode.
5.3 Eerste kalibratie
The device performs an auto-calibration upon power-on. Ensure the device is held in the air, away from any materials or your body, during startup for accurate calibration.
6. Gebruiksaanwijzing
6.1 In-/uitschakelen
- Houd de Stroom knop om het apparaat in of uit te schakelen.
- The device has an automatic power-off function (APO) after 5 minutes of inactivity to conserve battery. This can be toggled using the APO knop.
6.2 Selecting Measurement Mode and Material Type
The MT35 automatically detects the measurement mode based on whether the pin probe is connected.
- Pinless Mode: When the pin probe is disconnected, the device operates in non-destructive pinless mode.
- Pin-type Mode: When the pin probe is connected, the device automatically switches to pin-type mode.
To select the material type for measurement:
- Druk op de SET knop.
- Gebruik de Omhoog/Omlaag arrow buttons to cycle through the 6 preset material modes: Softwood, Hardwood, Drywall, Plaster, Screed, and Concrete.
- Pers SET om uw selectie te bevestigen.
6.3 Metingen uitvoeren
- Pinless Mode: Place the back of the device (where the sensor is located) flat against the surface of the material you wish to measure. The reading will appear on the LCD.
- Pin-type Mode: Carefully insert the steel pins of the probe into the material. Ensure good contact for an accurate reading.
6.4 Understanding the Display and Alarms
The color LCD provides clear visual feedback:
The LCD screen features a dynamic bar graph, a 3-color LED indicator, and displays the moisture value. Audible alarms are triggered when moisture exceeds a set threshold.
- Numerical Value: Displays the exact moisture percentage.
- Dynamic Bar Graph: Provides a visual representation of moisture levels.
- 3-kleurige LED-indicator:
- Groente: Droog
- Geel: Moist/Risk
- Rood: Nat
- Hoorbaar alarm: The device emits an audible alarm when the moisture level exceeds a preset threshold for the selected material. This threshold is adjustable.
- Stille modus: Druk op de Backlight/Sound button to toggle the audible alarm on or off.
6.5 Data Hold-functie
Druk op de UITSTEL button to freeze the current reading on the display. Press it again to release the hold and resume live measurements.
7. Meetrichtlijnen
For optimal accuracy and reliable results, consider the following guidelines:
- Nauwkeurigheid: The device provides readings with an accuracy of approximately ±2%.
- Pinless Measurement Depth: The pinless sensor can detect moisture up to a depth of 19mm (0.75 inches).
- Materiaaldikte: Ensure the material being measured is at least 5mm thick. For pinless measurements, results may be influenced by adjacent materials if the thickness is less than 2cm.
- Oppervlaktecontact: For pinless mode, ensure the sensor is in full contact with the surface. For pin-type mode, ensure pins are fully inserted.
- Interferentie: Avoid measuring near metal objects or other conductive materials, as this can affect readings.
- Omgevingsomstandigheden: Extreme temperatures can affect readings. Allow the device to acclimate to the environment before use.
This table provides a quick reference for moisture levels (Dry, Moist, Wet) and their corresponding percentage ranges for various materials.
8. Onderhoud
8.1 Reinigen
Veeg het apparaat af met een zachte, droge doek. Gebruik geen schuurmiddelen of oplosmiddelen.
8.2 Batterijonderhoud
The integrated Lithium-ion battery is designed for long life. Recharge the device when the low battery indicator appears on the display. Avoid fully discharging the battery frequently to prolong its lifespan.
The Neoteck MT35 features a USB-C charging port and a 1200mAh rechargeable battery, ensuring long operational periods.
8.3 Replacing Probes
If the pin-type probes become dull or damaged, they can be replaced using the provided wrench. Carefully unscrew the old pins and screw in the new ones.
8.4 Opslag
Store the device in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
9. Probleemoplossing
- Apparaat gaat niet aan: Zorg ervoor dat de batterij is opgeladen. Sluit het apparaat aan op een stroombron met behulp van de USB-C-kabel.
- Onjuiste metingen:
- Ensure the correct material type is selected.
- Verify proper contact with the material (flat for pinless, fully inserted for pin-type).
- Check for nearby metal objects that might interfere with readings.
- Perform auto-calibration by powering off and on, holding the device in the air.
- Audible alarm not working: Check if silent mode is activated by pressing the Backlight/Sound knop.
- Scherm is donker: Adjust the backlight using the Backlight/Sound button. Ensure the battery is sufficiently charged.
10. Specificaties
| Functie | Specificatie |
|---|---|
| Modelnummer | MT35 |
| Meetmodi | Pinless (Non-destructive), Pin-type (with external probe) |
| Materiaalmodi | Softwood, Hardwood, Drywall, Plaster, Screed, Concrete |
| Meetnauwkeurigheid | ±2% |
| Pinloze meetdiepte | Tot 19 mm (0.75 inch) |
| Weergave | Color LCD with LED indicators and dynamic bar graph |
| Energiebron | Rechargeable 1200mAh Lithium-ion Battery |
| Levensduur van de batterij | Tot 10 uur (continu gebruik) |
| Oplaadpoort | USB Type-C |
| Automatische uitschakeling | Yes (after 5 minutes of inactivity, configurable) |
| Alarmen | Audible and Visual (adjustable threshold) |
| Artikelgewicht | 330 gram |
| Pakket afmetingen | 19x14.5x4.2cm |
The Neoteck MT35 provides accurate moisture readings for a variety of materials, including different types of wood and construction materials.
11. Garantie en ondersteuning
Neoteck-producten zijn ontworpen voor betrouwbaarheid en prestaties. Voor garantie-informatie of technische ondersteuning kunt u de contactgegevens raadplegen die bij uw aankoop zijn meegeleverd of de officiële Neoteck-website bezoeken. webwebsite. Bewaar uw aankoopbewijs als aankoopbewijs voor garantieclaims.
