Thermalright TL-M12 120mm ARGB CPU Fan User Manual

1. Inleiding

Bedankt voor uw aankoopasing the Thermalright TL-M12 120mm ARGB CPU Fan. This fan is designed to provide efficient cooling and vibrant ARGB lighting for your computer system. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Image: Thermalright TL-M12 120mm ARGB Fan highlighting its infinite mirror effect, balanced airflow, low noise S-FDB bearing, and addressable RGB support.

2. Producteigenschappen

• High Performance Cooling: Automatic speed control via 4-pin PWM interface, adjusting fan speed based on motherboard temperature.
• Unique ARGB Mirror Lighting Effect: Features a well-designed ARGB infinite frame structure on the side and ARGB lines around the front, creating positive and measured surface ARGB lighting effects with multiple colorful options.
• Duurzame constructie: Made from industrial-grade PBT+PC material for strength and stability.
• S-FDB Bearing: Equipped with a high-durability magnetic assist Fluid Dynamic Bearing (S-FDB) for low-friction, low-noise operation, and a long service life.
• Trillingsabsorptie: Soft-touch rubber pads are pre-installed on each corner of the fan to reduce noise and vibration.
• Veelzijdige toepassing: Can be used as a case fan, with CPU air coolers, or with CPU water coolers to enhance overall system cooling.

Image: Infinity mirror lighting trims located on both sides of the fan frame for unique aesthetics.

Image: High-quality PBT+PC material construction and pre-installed silicone rubber pads for noise and vibration dampind.

Image: Detail of the S-FDB (Fluid Dynamic Bearing) for long-lasting, low-noise operation.

Image: The TL-M12 fan used in case airflow, air coolers, and water cooling radiators.

3. Inhoud van het pakket

The Thermalright TL-M12 fan package includes:

• 1 x TL-M12 CPU Fan
• Montageschroeven

4. Veiligheidsinformatie

• Ensure your computer system is powered off and unplugged before installation or maintenance.
• Ga voorzichtig om met de onderdelen om schade te voorkomen.
• Do not attempt to disassemble the fan bearing as it is maintenance-free.
• Buiten bereik van kinderen houden.
• Do not connect more than 5 ARGB fans of the same specification in series to a single header to prevent overloading.

5. Installatie en installatie

Follow these steps to install your Thermalright TL-M12 fan:

1. Monteer de ventilator: Use the included screws to securely install the fan onto your computer case, CPU cooler, or water cooling radiator. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
   

   Video: Installation tutorial for the TL-M12 CPU fan series, demonstrating how to install the fan on a case using screws.

2. Connect PWM for Fan Speed Control: Connect the 4-pin PWM fan cable from the TL-M12 fan to an available 4-pin fan header on your motherboard. This allows for automatic speed control based on system temperature.
   

   Image: Motherboard headers for fan and ARGB connections. Connect the 4-pin PWM cable to the FAN_4PIN PWM header.

   

   Image: Diagram illustrating PWM and ARGB header connections for fan speed and lighting effect synchronization. Up to three fans can be connected to one motherboard fan socket for PWM signal sync.
3. Connect ARGB for Lighting Effects: Connect the ARGB lighting cable from the TL-M12 fan to a compatible 3-pin +5V ARGB header on your motherboard. Ensure the arrows on the connectors align before plugging them in. This enables control over the fan's lighting effects.
   

   Image: Motherboard headers for fan and ARGB connections. Connect the ARGB cable to the FAN_+5V 3PIN ARGB header.

   

   Image: Diagram illustrating PWM and ARGB header connections for fan speed and lighting effect synchronization. Connect 3-pin ARGB headers to sync ARGB lighting effect.

4. Kabelbeheer: Route cables neatly to avoid interference with other components and to maintain good airflow within the case.

6. Gebruiksaanwijzing

Once installed and connected, the Thermalright TL-M12 fan operates as follows:

• Automatische snelheidsregeling: The fan's speed is automatically regulated by your motherboard via the 4-pin PWM connection, adjusting to the CPU or system temperature to optimize cooling performance and noise levels.
• ARGB-verlichtingsregeling: The ARGB lighting effects can be controlled through your motherboard's compatible ARGB software (if available) or a dedicated ARGB controller (not included). This allows for customization of colors, patterns, and synchronization with other ARGB components.
• Luchtstroom: The 7-blade design outputs a rated 47.6 CFM at 1500 RPM, providing effective airflow for cooling.

7. Onderhoud

To ensure optimal performance and longevity of your fan:

• Schoonmaak: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the fan is powered off and unplugged before cleaning.
• Handelswijze: The S-FDB (Fluid Dynamic Bearing) is designed to be maintenance-free. Do not attempt to disassemble the fan or lubricate the bearing.
• Kabelinspectie: Occasionally check the fan and ARGB cables for any signs of wear or damage.

8. Probleemoplossing

If you encounter issues with your Thermalright TL-M12 fan, refer to the following common problems and solutions:

• Ventilator draait niet:
  • Check if the 4-pin PWM cable is securely connected to the motherboard fan header.
  • Ensure the motherboard fan header is enabled in the BIOS/UEFI settings.
  • Verify that the system is receiving power.
• ARGB-verlichting werkt niet:
  • Check if the 3-pin +5V ARGB cable is securely connected to the motherboard ARGB header.
  • Ensure the ARGB header is enabled in your motherboard's software or BIOS/UEFI.
  • Confirm that the arrows on the ARGB connectors are correctly aligned.
  • Avoid connecting more than 5 ARGB fans in series to a single header.
• Overmatig lawaai/trillingen:
  • Zorg ervoor dat de ventilator stevig gemonteerd is en dat de schroeven goed vastgedraaid zijn.
  • Controleer of er kabels of obstakels zijn die de ventilatorbladen raken.
  • Verify that the rubber pads are properly seated on the fan corners.
• Slechte koelprestaties:
  • Check the fan's orientation to ensure it's pushing air in the desired direction (e.g., into the case for intake, out for exhaust).
  • Clean any dust buildup on the fan blades or heatsink fins.
  • Zorg voor voldoende luchtcirculatie in de computerbehuizing.

9. Specificaties

10. Garantie en ondersteuning

Thermalright products are manufactured to the highest quality standards. For warranty information, technical support, or customer service, please refer to the official Thermalright webGa naar de website of neem contact op met uw lokale winkelier. Bewaar uw aankoopbewijs voor garantieclaims.