Globe elektrisch 17000207

Globe Electric 17000207 LED-schijnwerper met drie koppen en bewegingssensor, gebruikershandleiding

Model: 17000207

1. Veiligheidsinformatie

Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.

2. Inhoud van het pakket

Controleer of alle componenten aanwezig zijn voordat u met de installatie begint.

3. Specificaties

SpecificatieWaarde
Modelnummer17000207
EnergiebronVast bedraad
Wattage32 Watt
Helderheid3200 Lumen
Kleurtemperatuur4000 Kelvin (daglichtwit)
Bewegingsdetectiezone240 degrees, up to 50 ft (15 m)
MateriaalPlastic
Binnen-/buitengebruikOpenlucht
WaterbestendigheidsniveauWaterbestendig
Afmetingen (L x B x H)7" x 12" x 8.4"
Garantie2 jaar beperkte fabrieksgarantie
Dimensions of the Globe Electric 17000207 flood light, showing 12 inches width, 8.4 inches height, and 7 inches depth.

Image: Product dimensions for planning installation space.

4. Installatie en installatie

This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.

4.1 Montageopties

The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.

Diagram showing the flood light installed as a wall mount and an eave mount, with an arrow indicating rotation of the canopy for different orientations.

Image: Wall mount and eave mount installation options.

4.2 Installatiestappen

  1. Schakel de stroom uit: Before starting, ensure the power to the installation area is turned off at the circuit breaker or fuse box.
  2. Install Mounting Bar: Secure the mounting bar onto the junction box.
  3. Montageplaat installeren: Attach the mounting plate to the mounting bar.
  4. Draadverbindingen: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
  5. Bevestig het armatuur: Secure the flood light fixture to the mounting plate using the center bolt.
  6. Zegel: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
  7. Herstel de stroom: Once installation is complete and secure, restore power to the circuit.
Three step diagram showing installation: 1. Install mounting bar onto junction box. 2. Install mounting plate to the mounting bar. 3. Attach fixture to mounting plate with center bolt.

Afbeelding: Stapsgewijze installatiehandleiding.

5. Gebruiksaanwijzing

The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.

5.1 Motion Activation

The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.

Diagram illustrating a person walking within a 240-degree, 50-foot detection zone of the motion-activated flood light.

Image: Motion detection zone illustration.

5.2 MotionBright™ 2-Level Lighting

This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.

Side-by-side comparison showing the flood light providing low ambient light when no motion is detected, and full brightness when motion is detected.

Image: MotionBright feature demonstrating low and full brightness modes.

5.3 Instellingen aanpassen

The motion sensor unit has adjustable dials to customize the light's behavior:

Close-up image of the flood light's control panel, showing dials for On Time, Sensitivity, Brightness, and MotionBright settings, with labels for each function.

Image: Control dials for adjusting light settings.

5.4 Adjusting Lamp Hoofden

De drie LED lamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.

Diagram showing the adjustable lamp heads of the flood light, with arrows indicating their range of motion.

Image: Adjustable lamp heads for directing light.

6. Onderhoud

This LED flood light is designed for minimal maintenance.

7. Probleemoplossing

Als u problemen ondervindt met uw schijnwerper, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

ProbleemMogelijke oorzaakOplossing
Licht gaat niet aan.No power, faulty wiring, sensor blocked, incorrect settings.Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings.
Licht blijft continu branden.Continuous motion detected, 'On Time' set too long, 'MotionBright' setting.Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn').
Beweging wordt niet betrouwbaar gedetecteerd.Sensor blocked, sensitivity too low, incorrect angle.Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage.
Licht flikkert.Loose wiring connection, power fluctuations.Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected.

8. Garantie en ondersteuning

This Globe Electric product is backed by a 2 jaar beperkte fabrieksgarantie vanaf de aankoopdatum. Deze garantie dekt defecten in materialen en vakmanschap bij normaal gebruik.

For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.

Voor meer informatie, bezoek de Globe Electric Store on Amazon.

Gerelateerde documenten - 17000207

Preview Globe Electric bewegingsgeactiveerde beveiligingslamp: installatie- en bedieningshandleiding
Deze handleiding bevat gedetailleerde instructies voor het installeren, bedienen en oplossen van problemen met de bewegingsgeactiveerde beveiligingslamp van Globe Electric (model 17000200). Specificaties, veiligheidswaarschuwingen en onderhoudstips zijn inbegrepen.
Preview Installatiehandleiding voor de Globe Electric ROCKHILL 3-lichts LED-badkamerlamp met bewegingsgeactiveerd nachtlampje
Gedetailleerde installatiehandleiding en gebruikershandleiding voor de Globe Electric ROCKHILL 3-lichts LED-badkamerlamp met bewegingsgeactiveerd nachtlampje (model 63000230), inclusief veiligheidsinstructies, functies, specificaties, installatiestappen en probleemoplossing.
Preview Globe Electric bewegingsgeactiveerde LED-architectuurbeveiligingslamp - Installatie- en bedieningshandleiding
Deze handleiding bevat gedetailleerde instructies voor het installeren, bedienen en oplossen van problemen met de Globe Electric bewegingsgeactiveerde LED-architectuurbeveiligingslamp. Lees meer over specificaties, veiligheidsmaatregelen, installatie en veelvoorkomende problemen.
Preview Globe Rockhill 1-lichts LED-badkamerlamp met bewegingsgeactiveerd nachtlampje - Installatiehandleiding
Installatie- en gebruikershandleiding voor de Globe Rockhill 1-lichts LED-badkamerlamp (model 63000231). Kenmerken zijn onder andere LED-verlichting, een bewegingsgeactiveerd nachtlampje en een instelbare kleurtemperatuur. Inclusief veiligheidsinstructies en probleemoplossing.
Preview Globe Electric Smart Bulb: Functies, installatie en app-bedieningshandleiding
Leer hoe u uw Globe Electric Smart Bulb instelt en bedient met de Globe Suite-app. Deze handleiding behandelt functies, specificaties, verbindingsinstructies, app-bediening en integratie met spraakassistenten.
Preview Installatiehandleiding en gebruikershandleiding voor de Globe Smart Wired Doorbell Kit
Uitgebreide handleiding voor het installeren en gebruiken van de Globe Smart Wired Doorbell Kit (model 18000156), inclusief installatie, app-bediening en probleemoplossing.