1. Inleiding
The EoRa-S3-900TB is a versatile development board designed by EBYTE, integrating the powerful ESP32-S3FH4R2 chip with a LoRa module. This board is engineered for a wide range of applications requiring Wi-Fi, Bluetooth LE, and LoRa wireless communication capabilities. It features a compact design with essential peripherals for rapid prototyping and testing.
The ESP32-S3 is a low-power MCU system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth LE wireless communication. The chip integrates a high-performance 32-bit LX7 dual-core processor, an ultra-low-power co-processor, Wi-Fi baseband, Bluetooth baseband, RF module, and peripherals up to 240 MHz. The ESP32-S3FH4R2 package includes 384 KB of ROM, 512 KB of SRAM, 16 KB of RTC SRAM, 4 MB of FLASH, and 2 MB of PSRAM.
Afbeelding: Schuin view of the EoRa-S3-900TB Test Board, showcasing its compact form factor and various components.
2. Belangrijkste kenmerken
- Verwerker: 32-bit LX7 dual-core processor, up to 240 MHz.
- Geheugen: Integrated 4 MB FLASH and 2 MB PSRAM.
- Draadloze connectie: Supports 2.4 GHz Wi-Fi (IEEE 802.11b/g/n) and Bluetooth LE (Bluetooth 5, Bluetooth mesh).
- LoRa-module: E22-900MM22S with SX1262 chip, supporting 850 ~ 930 MHz operating frequency and +22 dBm max output power.
- Weergave: Integrated 0.96-inch OLED display.
- Opslag: SD card slot for expanded storage.
- Stroombeheer: Li-ion battery charging circuit with a rated charging current of 500mA.
- Interface: Type-C interface with USB 2.0 protocol for power and data.
- Antenne: Common antenna for Wi-Fi and Bluetooth.
3. Technische specificaties
| Specificatie | Waarde |
|---|---|
| Modelnaam | EoRa-S3-900TB |
| Merk | E-BYTE |
| CPU-snelheid | 240 MHz |
| Geheugenopslagcapaciteit | 6 MB (4MB FLASH + 2MB PSRAM) |
| Connectiviteitstechnologie | Bluetooth wifi |
| Wi-Fi-protocollen | IEEE 802.11b/g/n (20 MHz and 40 MHz bandwidths) |
| Wi-Fi-gegevenssnelheden | Up to 150 Mbps (1T1R mode) |
| Bluetooth LE Rates | 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps |
| LoRa-frequentie | ~ 850 930 MHz |
| LoRa Max Output Power | +22 dBm |
| OLED Display Size | 0.96 inch |
| Batterij laadstroom | 500mA (rated) |
| Interface | Type-C (USB 2.0) |
4. Inhoud van het pakket
The EoRa-S3-900TB package typically includes the following components:
- EoRa-S3-900TB Development Board (with integrated Type-C interface, E22-900MM22S LoRa module, 0.96-inch OLED display, SD card slot, Li-ion battery charging circuit, and power circuit)
Image: The product packaging box, displaying manufacturer details and certifications.
5. Hardware Components and Pinout
The EoRa-S3-900TB board is designed with various accessible components and GPIO pins for development and testing. Below are diagrams illustrating the main components and the pin definitions.
Image: Detailed diagram of the EoRa-S3-900TB board highlighting key components and their functions, including the LoRa module, ESP32-S3 chip, and various interfaces.
5.1. Component Introduction
| NEE | Belangrijkste hardware | Component Introductie: |
|---|---|---|
| 1 | E22-400MM22S or E22-900MM22S | Ultra-small size independently developed by Chengdu Ebyte Electronics Co., Ltd. Based on the new generation of LoRa RF chip SX1262. E22-400MM22S and E22-900MM22S are produced by American Semtech and are suitable for 433MHz, 470MHz, 868MHz and 915MHz patch-type LoRa wireless modules. |
| 2 | ESP32-S3 chip | ESP32-S3 is a low-power MCU system-on-chip (SoC) that supports 2.4GHz Wi-Fi and Bluetooth LE wireless communication. |
| 3 | 3D omnidirectional antenna (Wi-Fi antenna) | Maximum gain 4.9dBi, 2.4G Wi-Fi omnidirectional antenna |
| 4 | IPEX seat (Wi-Fi antenna) | IPEX first generation socket, 2.4G Wi-Fi antenna |
| 5 | IPEX seat (LoRa antenna) | IPEX first generation seat, LoRa antenna |
| 6 | SMA radio frequency interface (LoRa antenna) | Full length 14.5mm SMA head, LoRa antenna |
| 7 | Reset-toets | Resetknop |
| 8 | schakelaar | For completely disconnecting battery power |
| 9 | GPIO external interface | GPIO from ESP32 |
| 10 | GPIO external interface | UART serial port TXD |
| 11 | Externe batterijinterface | SH 1.25mm, 2pin battery interface |
| 12 | Enkele kleur LED | Addressable RGB LED, driven by GPIO8 |
| 13 | Tweekleurige LED | Charging indicator light, red when charging, green when fully charged |
| 14 | OLED-scherm | 0.96-inch OLED-scherm |
| 15 | Opstartsleutel | Download button. Press and hold the Boot key and press the Reset key to enter the "firmware download" mode and download the firmware through the serial port. |
| 16 | USB download port | USB interface can be used as the power supply for the development board or the communication interface between PC and ESP32-S3 chip |
| 17 | TF-kaartsleuf | Short body TF card slot |
| 18 | Pin | All available GPIO pins (except the SPI bus of the flash) have been led to the pin header of the development board. Please see pin headers for more information. |
5.2. Pindefinitie
Image: Diagram illustrating the pin layout and dimensions of the EoRa-S3-900TB board, crucial for connecting external components.
| NEE | Pinnaam | Speldtype | Pingebruik |
|---|---|---|---|
| 1 | VCC | Stroomvoorziening | Power pin, can be used as 5V power output after normal power supply |
| 2 | GND | Stroomvoorziening | Vermogen GND |
| 3 | 3.3VA | Stroomvoorziening | The power pin can be used as a 3.3V power output after normal power supply. It is not allowed to connect to 3.3V or other external power. |
| 4 | GND | Stroomvoorziening | Vermogen GND |
| 5 | GPIO42 | Ingang Uitgang | - |
| 6 | GPIO46 | Ingang Uitgang | - |
| 7 | GPIO41 | Ingang Uitgang | - |
| 8 | GPIO40 | Ingang Uitgang | - |
| 9 | GPIO39 | Ingang Uitgang | - |
| 10 | U0RXD | Invoer | UART serial port RXD |
| 11 | U0TXD | Uitvoer | UART serial port TXD |
| 12 | GPIO38 | Ingang Uitgang | - |
| 13 | GPIO16 | Ingang Uitgang | - |
| 14 | GPIO15 | Ingang Uitgang | - |
| 15 | RST | Ingang Uitgang | Connect to ESP32-S3 reset pin |
| 16 | GPIO08 | Ingang Uitgang | Connect to the reset pin of the LoRa module |
| 17 | GPIO12 | Ingang Uitgang | - |
| 18 | GPIO48 | Ingang Uitgang | - |
| 19 | GPIO47 | Ingang Uitgang | - |
| 20 | GPIO35 | Ingang Uitgang | Connect to DIO1 of LoRa module |
| 21 | GPIO34 | Ingang Uitgang | BUSY connected to LoRa module |
| 22 | GPIO33 | Ingang Uitgang | - |
| 23 | GPIO36 | Ingang Uitgang | BOOT button connected to the base panel |
| 24 | GPIO37 | Ingang Uitgang | LED connected to base plate |
| 25 | GPIO38 | Ingang Uitgang | - |
| 26 | GPIO37 | Ingang Uitgang | - |
6. Aan de slag
6.1. De printplaat van stroom voorzien
The EoRa-S3-900TB can be powered via its Type-C USB port. Connect the board to a computer or a 5V USB power adapter using a standard Type-C cable. The board also supports Li-ion battery power, with an integrated charging circuit. Ensure the battery is connected to the external battery interface (SH 1.25mm, 2pin) if using battery power.
6.2. Firmware downloaden
To upload new firmware or programs to the ESP32-S3 chip:
- Connect the board to your computer via the Type-C USB download port.
- Houd de Opstartsleutel (labeled 15 in the component introduction diagram).
- While holding the Boot key, briefly press the Reset-toets (labeled 7).
- Release the Boot key. The board should now be in firmware download mode, ready to receive firmware via the serial port.
Image: The EoRa-S3-900TB board featuring its integrated 0.96-inch OLED display, which can be used for status indicators or data output.
7. Bedrijfsmodi:
7.1. Wi-Fi Operating Modes
The ESP32-S3 supports various Wi-Fi operating modes:
- Infrastructure BSS Station mode (STA mode): The module acts as a client and connects to an existing Wi-Fi access point or router. In this mode, the module does not provide connections to other devices.
- SoftAP mode (AP mode): The module functions as a wireless access point, allowing other Wi-Fi devices to connect to it. It can establish TCP/IP-based server, client, and UDP connections, supporting up to 6 stations and up to 7 TCP Socket transmissions.
- Station + SoftAP mode: The module operates simultaneously as both a client (STA) and an access point (AP).
Image: Visual representation of the Wi-Fi operating modes (AP and STA) supported by the EoRa-S3-900TB board, illustrating how it can function as an access point or connect to an existing network.
7.2. Bluetooth LE Data Rates
The Bluetooth LE functionality supports multiple data rates, providing flexibility for various applications:
- 125 Kbps
- 500 Kbps
- 1 Mbps
- 2 Mbps
Image: Diagram illustrating the adjustable multi-level data rates for Bluetooth Low Energy (BLE) supported by the board, ranging from 125 Kbps to 2 Mbps.
8. Toepassingsscenario's
The EoRa-S3-900TB board is suitable for a wide array of applications due to its versatile connectivity and processing capabilities:
- Smart home and industrial automation
- Healthcare devices
- Smart agriculture systems
- Service robotics
- General Purpose Low Power IoT Sensor Hubs
- General Purpose Low Power IoT Data Loggers
- Audio devices and camera video streaming
- USB devices and consumer electronics
- Speech recognition and image recognition systems
- Wi-Fi + Bluetooth network cards
- Touch and proximity sensing applications
Afbeelding: Examples of diverse application scenarios for the EoRa-S3-900TB, including smart home, medical equipment, audio equipment, smart agriculture, service robots, and electronic products.
9. Probleemoplossing
If you encounter issues with your EoRa-S3-900TB board, consider the following common troubleshooting steps:
- Geen stroom: Ensure the Type-C cable is securely connected and the power source (USB port or adapter) is functional. If using a battery, check its charge level and connection.
- Firmware-upload mislukt: Verify that the board is in download mode (Boot key pressed during reset). Check your serial port settings and driver installation on your computer.
- Problemen met Wi-Fi/Bluetooth-connectiviteit: Ensure antennas are properly connected. Check your code for correct Wi-Fi credentials or Bluetooth pairing procedures. Verify that the module is operating in the correct mode (AP, STA).
- OLED-scherm werkt niet: Check connections to the OLED display. Ensure your code is correctly initializing and sending data to the display.
- SD-kaart niet gedetecteerd: Ensure the SD card is inserted correctly into the TF card slot. Check your code for proper SD card initialization and file systeem operaties.
10. Onderhoud
To ensure the longevity and optimal performance of your EoRa-S3-900TB board:
- Schoon houden: Reinig het bord regelmatig met een zachte, droge borstel of perslucht om stof en vuil te verwijderen. Vermijd het gebruik van vloeistoffen of agressieve chemicaliën.
- Voorzichtig behandelen: Avoid dropping the board or subjecting it to physical shocks. Handle by the edges to prevent damage to components.
- Juiste opslag: Bewaar het bord op een droge, koele plaats, uit de buurt van direct zonlicht en extreme temperaturen. Gebruik antistatische zakken als u het bord voor langere tijd opbergt.
- Uitschakelen wanneer niet in gebruik: Disconnect power when the board is not in use, especially if using battery power, to prevent unnecessary discharge.
11. Ondersteuning en garantie
For technical support, documentation, or further inquiries regarding the EoRa-S3-900TB test board, please contact the manufacturer:
Fabrikant: Chengdu Ebyte Elektronische Technologie Co., Ltd.
Webwebsite: http://www.cdebyte.com/
For EU customers, the authorized representative is:
EU-REP: evalmaster Consulting GmbH
Bethaniestr. 30
60325 Frankfurt am Main
Duitsland
Raadpleeg de productverpakking of aankoopdocumentatie voor de specifieke garantievoorwaarden.
