Invoering
Welcome to the user manual for your Montech AX 140 ARGB Standard Fan. This document provides essential information for the proper installation, operation, and maintenance of your new cooling fan. Please read this manual thoroughly before installation and retain it for future reference.
Veiligheidsinformatie
Observe the following safety guidelines to prevent damage to the product or injury to yourself:
- Always disconnect your computer from the power supply before installing or handling internal components.
- Handle the fan and its components with care to avoid damage to delicate parts.
- Zorg voor een goede aarding om schade door elektrostatische ontlading (ESD) te voorkomen.
- Do not expose the fan to liquids or excessive moisture.
- Buiten bereik van kinderen houden.
Inhoud van het pakket
Controleer of alle artikelen in uw pakket aanwezig zijn:
- Montech AX 140 ARGB Standard Fan
- Montageschroeven
Specificaties
| Functie | Detail |
|---|---|
| Merk | Montech |
| Modelnummer | AX140B |
| Ventilatorgrootte | 140 mm |
| Maximale rotatiesnelheid | 1600 toeren per minuut |
| Geluidsniveau | 27dB |
| Type stroomaansluiting | 4-Pin PWM |
| ARGB Connector Type | 3-pins 5V adresseerbare RGB |
| Deeltage | 12 Volt (DC) |
| Wattage | 32.6 watt |
| Koelmethode | Lucht |
| Compatibele apparaten | Bureaublad |
| Materiaal | Plastic |
Instellen en installeren
Componenten identificeren
The Montech AX 140 ARGB fan consists of the fan frame, fan blades, and integrated ARGB lighting. It features a 4-Pin PWM connector for fan speed control and a standard 3-Pin 5V ARGB connector for lighting synchronization.
Figuur 1: Geëxplodeerd view of the Montech AX 140 ARGB fan, illustrating its main components including the fan blades, motor, and the ARGB illuminated frame.
De ventilator monteren
- Ensure your computer system is powered off and disconnected from the main power supply.
- Identify the desired mounting location within your PC case. Common locations include front, rear, top, or bottom fan mounts.
- Position the Montech AX 140 ARGB fan against the mounting holes, ensuring the airflow direction is correct for your cooling setup (typically, the side with the frame supports and sticker indicates exhaust).
- Secure the fan using the provided mounting screws. Tighten screws evenly to prevent vibration.
Figuur 2: Voorzijde view of the Montech AX 140 ARGB fan, highlighting the fan blades and the vibrant ARGB lighting ring.
De ventilator aansluiten
- Locate an available 4-Pin fan header on your motherboard. Connect the fan's 4-Pin PWM cable to this header. This allows the motherboard to control fan speed.
- Locate an available 3-Pin 5V ARGB header (Addressable RGB) on your motherboard. Connect the fan's ARGB cable to this header. Ensure correct polarity to avoid damage. Niet aansluiten op een 12V RGB-header.
- If your motherboard does not have an ARGB header, you may need a separate ARGB controller (not included) to manage the lighting effects.
Afbeelding 3: Achter view of the Montech AX 140 ARGB fan, displaying the central motor hub with product information and the attached power and ARGB cables.
Gebruiksaanwijzing
Ventilatorsnelheidsregeling (PWM)
The Montech AX 140 ARGB fan utilizes Pulse Width Modulation (PWM) for precise speed control. Once connected to a 4-Pin PWM header on your motherboard, you can manage the fan speed through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. This allows for dynamic adjustment of fan speed based on system temperature, optimizing cooling performance and noise levels.
ARGB-lichtregeling
The Addressable RGB (ARGB) lighting can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard's software is up-to-date for the best lighting customization experience.
Onderhoud
Schoonmaak
To maintain optimal performance and airflow, regularly clean your Montech AX 140 ARGB fan:
- Schakel uw computer uit en haal de stekker uit het stopcontact.
- Use compressed air to gently remove dust accumulation from the fan blades and frame. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- For stubborn dirt, a soft, dry cloth can be used. Avoid using liquid cleaners directly on the fan.
Probleemoplossing
Ventilator draait niet
- Check if the 4-Pin PWM connector is securely attached to the motherboard fan header.
- Verify that the fan header is enabled in your motherboard's BIOS/UEFI settings.
- Ensure the system is receiving power.
ARGB-lampjes werken niet
- Confirm the 3-Pin 5V ARGB connector is correctly plugged into a compatible ARGB header on your motherboard. Ensure it is niet connected to a 12V RGB header.
- Check your motherboard's ARGB control software to ensure lighting effects are enabled and configured.
- If using an external ARGB controller, ensure it is properly powered and configured.
Garantie en ondersteuning
For warranty information or technical support, please refer to the official Montech website or contact Montech customer service. Keep your proof of purchase for warranty claims.
