DonosHome DH300 OBD2 Auto Diagnostic Scanner User Manual

1. Inleiding

The DonosHome DH300 is an innovative, multi-function OBD2 code reader designed to be one of the most accurate and economical vehicle diagnostic tools available. It helps users easily determine the cause of the Check Engine Light (MIL) and provides comprehensive information on vehicle health and performance. This manual provides detailed instructions for the proper use and maintenance of your DH300 scanner.

Figure 1.1: DonosHome DH300 OBD2 Scanner and its retail packaging, highlighting key features.

2. Veiligheidsmaatregelen

Please read this user manual carefully and follow the warnings and precautions below before use, to avoid the possibility of personal injury or damage to the vehicle and/or the device:

• Do not smoke, light matches, or cause sparks near the vehicle during operation.
• Do not come into contact with hot engine parts to avoid severe burns, especially when the engine is running.
• Do not use this tool while driving.
• Always wear appropriate eye protection when working on vehicles.
• Ensure the vehicle is in a well-ventilated area when running the engine.

3. Inhoud van het pakket

Upon opening the package, please verify that all items listed below are included and in good condition:

• 1 x DonosHome DH300 OBD2 Scanner
• 1 x Gebruikershandleiding (dit document)
• 1 x Pakketdoos

Figure 3.1: The package includes the OBD2 scanner, user manual, and package box.

4. Producteigenschappen

The DonosHome DH300 OBD2 scanner is equipped with a variety of features designed for comprehensive vehicle diagnostics:

• Check Engine Light (MIL) Management: Easily determine the cause, turn off the light, clear codes, and reset monitors.
• DTC-definities: Displays Diagnostic Trouble Code definitions directly on the screen.
• Framegegevens bevriezen: View a snapshot of vehicle conditions when a fault code was set.
• I/M-gereedheidsstatus: Check monitor and I/M readiness status for emissions testing.
• Codes in behandeling: Identify codes that have not yet triggered the MIL.
• Real-time PCM Data Stream: Read live data from the Powertrain Control Module.
• O2 Sensor Test Data: Display real-time O2 sensor test results.
• Data Graphing: Visualize live data for easier analysis.
• Gegevens afspelen: Read, store, and playback real-time sensor data, DTC data, and freeze frame data.
• Test Modules: Perform present test modules.
• Ophalen van voertuiginformatie: Retrieve VIN (Vehicle Identification Number), CIN (Calibration Identification Number), and CVN (Calibration Verification Number).
• Protocol ondersteuning: Ondersteunt CAN (Controller Area Network) en alle andere gangbare OBD2-protocollen.
• Ingebouwde DTC-bibliotheek: Integrated OBD2 DTC lookup library for quick reference.
• Voltmeter Function: Test batterij voltage en laadsysteem.
• Waveform Graphing: Starting waveform graph and real-time waveform graph.
• Meertalige ondersteuning: 10 built-in languages (English, German, Spanish, French, Italian, Dutch, Finnish, Polish, Portuguese, Russian).
• Ergonomisch ontwerp: Color screen, plug-and-play operation, powered directly by the vehicle.
• Foutindicatoren: Red, yellow, and green LED indicators for quick fault status.

Figure 4.1: Key diagnostic functions of the DonosHome DH300.

Figure 4.2: Innovative design with LED indicators and multilingual support.

Figure 4.3: Multilingual interface and broad vehicle compatibility.

5. Installatie en verbinding

The DH300 scanner is designed for simple plug-and-play operation. Follow these steps to connect the device to your vehicle:

1. Zoek de OBD2-poort: The OBD2 port is typically located under the dashboard on the driver's side, often near the steering column. Refer to your vehicle's owner's manual if you cannot find it.
2. Connect the OBD2 Plug: Firmly insert the DH300's OBD2 connector into the vehicle's OBD2 port. The device will power on automatically.
3. Start de motor: Turn the vehicle's ignition to the "ON" position or start the engine. The scanner will establish communication with the vehicle's ECU.
4. Begin Diagnostics: Once connected and powered, the scanner is ready for use.

Figure 5.1: Simple plug-and-play connection process.

6. Gebruiksaanwijzing

The DH300 features a user-friendly interface with a color screen and five buttons: Up, Down, OK, ESC, and I/M. Navigate through menus using the Up/Down buttons, confirm selections with OK, and go back with ESC. The I/M button provides quick access to readiness status.

6.1. Reading and Clearing Trouble Codes (DTCs)

To read and clear Diagnostic Trouble Codes:

1. Selecteer in het hoofdmenu 'Diagnose' en druk op OK.
2. Navigate to "Read Codes" and press OK. The scanner will display any stored, pending, or permanent codes.
3. To clear codes, select "Erase Codes" from the diagnostic menu and press OK. Confirm the action when prompted. This will turn off the Check Engine Light.

Figure 6.1: DTC Lookup function and examples of error codes.

6.2. I/M Readiness Quick Start

The I/M Readiness function allows you to quickly check the status of emission-related monitors, which is crucial for smog tests.

• Druk op de speciale IN DE button on the scanner for a quick check.
• Alternatively, navigate to "I/M Readiness" from the main menu.
• The screen will display the status of various monitors (e.g., MIL, MIS, FUE, CCM, CAT, HCAT, O2S, EVAP, AIR, HRT, EGR) indicating whether they are "OK" (completed), "X" (not completed), or "N/A" (not applicable).

Figure 6.2: I/M Readiness Quick Start screen.

6.3. Voltmeter and Battery Test

The DH300 includes a voltmeter function to test your vehicle's battery and charging system.

• From the main menu, select "Voltmeter" and press OK.
• Het scherm geeft het huidige batterijvolume weer.tage and charging status (e.g., Normal, Charging).
• Interpret the results based on the provided guidelines:
  • Deeltage normal: >12.9V Before Starting, >13.2-14.8V After Starting.
  • Deeltage slightly low: <12.9V Before Starting, <13.2V After Starting.
  • Deeltage te laag: <10.8-11.8V Before Starting.
  • Deeltage te hoog: >14.8V After Starting.

Figure 6.3: Voltmeter and Battery Test interface.

6.4. Live datastroom

View real-time sensor data from your vehicle's engine. This can help diagnose intermittent problems or verify repairs.

• From the main menu, select "Diagnose" and then "Live Data".
• The scanner will display various parameters such as engine RPM, vehicle speed, coolant temperature, O2 sensor readings, etc.
• Use the Up/Down buttons to scroll through the data. Some parameters can be graphed for better visualization.

6.5. Other Diagnostic Functions

The DH300 offers additional diagnostic capabilities:

• O2-sensortest: Access results of the oxygen sensor monitor tests.
• EVAP-systeemtest: Start een test van het verdampingsemissiebeheersingssysteem.
• Test van de on-board monitor: View results of on-board diagnostic monitoring tests for specific components/systems.
• VIN-nummer ophalen: Get vehicle information including VIN, CIN, and CVN.
• Review Geschiedenis: Access previously stored diagnostic data.

7. Onderhoud

To ensure the longevity and optimal performance of your DonosHome DH300 scanner:

• Schoonmaak: Reinig de buitenkant van de scanner met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
• Opslag: Bewaar het apparaat op een schone, droge plaats, uit de buurt van extreme temperaturen en direct zonlicht.
• Kabelonderhoud: Avoid bending or crimping the OBD2 cable excessively. Always grasp the connector, not the cable, when plugging or unplugging.
• Software-updates: Controleer die van de fabrikant website periodically for any available software updates to ensure compatibility with newer vehicles and improved functionality.

8. Probleemoplossing

If you encounter issues while using your DH300 scanner, refer to the following common problems and solutions:

9. Specificaties

10. Garantie en ondersteuning

DonosHome provides excellent after-sales service, including a 2 jaar garantie and professional technical support for the DH300 OBD2 Auto Diagnostic Scanner.

For technical assistance, warranty claims, or any other inquiries, please contact DonosHome customer service. Refer to the contact information provided with your purchase or on the official DonosHome webplaats.