Invoering
The Schiit Midgard is a versatile headphone amplifier en preamp designed to deliver high-fidelity audio. It features a Halo topology mixed-mode feedback system, providing robust power output for a wide range of headphones. This manual provides essential information for setting up, operating, and maintaining your Midgard unit.
Figure 1: Schiit Midgard Headphone Amplifier en Preamp. This image displays the overall design of the unit, showcasing its matte black finish and compact form factor.
Instellen
1. Uitpakken en inhoud
Carefully remove the Midgard unit from its packaging. Ensure all components are present:
- Schiit Midgard Headphone Amplifier en Preamp
- Stroomkabel
- Gebruikershandleiding (dit document)
2. Voorpaneel overview
Figure 2: Front Panel. This image highlights the front panel of the Midgard, showing the volume knob, gain switches, and headphone output jacks.
- Gain-schakelaars: Two switches for adjusting the gain level.
- Volumeknop: Controls the output volume for headphones and preamp uitgangen.
- 1/4" TRS Headphone Output: Standaard hoofdtelefoonaansluiting.
- 4-pin XLR Headphone Output: Balanced headphone jack for compatible headphones.
3. Aansluitingen op het achterpaneel
Figure 3: Rear Panel Connections. This image illustrates the rear panel of the Midgard, detailing the various input and output ports, including balanced XLR and single-ended RCA connections, and the power input.
- Gebalanceerde ingangen (XLR): Connect audio sources with balanced XLR outputs.
- Single-Ended Inputs (RCA): Connect audio sources with single-ended RCA outputs.
- Gebalanceerde Preamp Outputs (XLR): Aansluiten op stroom amplifiers or active speakers with balanced XLR inputs.
- Single-Ended Preamp Outputs (RCA): Aansluiten op stroom amplifiers or active speakers with single-ended RCA inputs.
- Wisselstroom ingang: Connect the provided power cable. The unit operates on 115VAC only and is designed for use in the United States, Canada, and Mexico.
4. Uw systeem aansluiten
- Ensure the Midgard unit is powered off and unplugged.
- Connect your audio source (e.g., DAC, streamer) to the desired input on the rear panel (Balanced XLR or Single-Ended RCA).
- If using headphones, connect them to either the 1/4" TRS or 4-pin XLR output on the front panel.
- Als u de preamp function, connect the Balanced XLR or Single-Ended RCA preamp outputs to your power ampluidsprekers of actieve luidsprekers.
- Connect the power cable to the AC Power Input on the rear panel, then plug it into a 115VAC wall outlet.
Gebruiksaanwijzing
1. In-/uitschakelen
To power on the Midgard, ensure all connections are secure, then flip the power switch located on the rear panel. To power off, flip the switch back to the off position.
2. Volume aanpassen
Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume. Start with the volume at its lowest setting before playing audio to prevent sudden loud sounds.
3. Selecting Gain Level
The Midgard features two gain levels. Use the gain switches on the front panel to select the appropriate gain for your headphones. Lower gain is suitable for sensitive headphones, while higher gain provides more power for less sensitive or high-impedance headphones.
4. Using as a Headphone Ampverliezer
Connect your headphones to either the 1/4" TRS or 4-pin XLR output. The Midgard delivers nearly 5W into 32 ohms, providing ample power for most headphones. Ensure your headphones are compatible with the selected output type.
5. Using as a Preamp
The Midgard can also function as a preamp. Connect its balanced or single-ended preamp uitgangen naar een vermogen amplifier or active speakers. The volume knob controls the output level for both headphones and preamp outputs simultaneously.
Onderhoud
To ensure the longevity and optimal performance of your Schiit Midgard, follow these maintenance guidelines:
- Schoonmaak: Gebruik een zachte, droge doek om de buitenkant van het apparaat schoon te maken. Vermijd het gebruik van vloeibare reinigingsmiddelen of oplosmiddelen, aangezien deze de afwerking of interne onderdelen kunnen beschadigen.
- Ventilatie: Ensure the unit has adequate ventilation. Do not block the ventilation holes on the top or sides of the chassis.
- Omgeving: Operate the Midgard in a clean, dry environment, away from direct sunlight, excessive heat, moisture, or dust.
- Stroom: Always unplug the unit from the power outlet before cleaning or if it will be unused for an extended period.
Probleemoplossing
If you encounter issues with your Schiit Midgard, refer to the following common troubleshooting steps:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| No sound from headphones/preamp uitgangen. |
|
|
| Vervormde of slechte geluidskwaliteit. |
|
|
| Het apparaat wordt niet ingeschakeld. |
|
|
If the problem persists after trying these steps, please contact Schiit Audio customer support for further assistance.
Specificaties
| Functie | Detail |
|---|---|
| Modelnaam | Midgard |
| Afmetingen (L x B x H) | 9 x 6 x 1.5 inch |
| Artikelgewicht | 3 pond |
| Power Output (into 32 ohms) | Nearly 5W (4.8W specified) |
| Frequentierespons | 20Hz-20Khz, +/-0.01dB |
| Impedantie | 2 Ohm |
| Koptelefoonaansluiting | 6.35 mm Jack (1/4" TRS), 4-pin XLR |
| Interface invoerapparaat | Balanced XLR, Single-Ended RCA |
| Output Device Interface | Gebalanceerde XLR Preamp, Single-Ended RCA Preamp |
| Voedingscompatibiliteit | 115VAC only (USA, Canada, Mexico) |
| Materiaal | Metaal |
| Speciale kenmerken | Halo Topology, Dual Gain Levels, Made in Texas, USA |
Garantie en ondersteuning
The Schiit Midgard Headphone Amplifier en Preamp comes with a standard manufacturer's warranty. For specific warranty terms, duration, and to register your product, please refer to the official Schiit Audio webwebsite of neem rechtstreeks contact op met hun klantenservice.
For technical support, service, or any questions not covered in this manual, please visit the Schiit Audio Store on Amazon or the official Schiit Audio webplaats.
