Suptek MT5082 Tilt TV Wall Mount Instruction Manual

Invoering

Thank you for choosing the Suptek MT5082 Tilt TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV wall mount. Please read all instructions carefully before beginning installation to ensure a secure and optimal viewervaring.

Belangrijke veiligheidsinformatie

WAARSCHUWING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or damage.

• Zorg ervoor dat het montageoppervlak het gecombineerde gewicht van de beugel en de tv veilig kan dragen.
• Overschrijd het maximale draagvermogen van 60 kg niet.
• This mount is designed for wood studs up to 24 inches apart, or solid concrete/brick walls. Do not mount on drywall alone.
• Gebruik altijd een stud finder om de houten balken nauwkeurig te lokaliseren.
• Use the provided hardware. If your TV requires different screws, consult your TV's manual or a hardware professional.
• Voor de installatie worden twee personen aanbevolen.
• Houd kinderen en huisdieren uit de buurt tijdens de installatie.

Controles voorafgaand aan de installatie

Before you begin, verify the following to ensure compatibility and a successful installation:

• TV-formaat: Compatibel met de meeste 37-82 inch tv's.
• TV-gewicht: Uw tv mag niet meer dan 60 kg wegen.
• VESA-patroon: Check the back of your TV for the four mounting holes. Measure the horizontal and vertical distance between these holes. The VESA pattern must be between Min: 200x100 mm and Max: 600x400 mm.
• Cable Outlets: Ensure the mount will not block any cable outlets or ports on the back of your TV.
• Muurtype: This mount is suitable for wood studs (up to 24" apart) or solid concrete/brick walls.

Image: Pre-installation checks including VESA compatibility (Min: 200x100 mm, Max: 600x400 mm), cable outlet considerations, TV weight (Max 132 lbs) and size (37-82"), and compatible wall types (wood studs up to 24" apart, concrete/brick wall).

Inhoud van het pakket

Controleer of alle onderdelen aanwezig en onbeschadigd zijn. Als er onderdelen ontbreken of beschadigd zijn, neem dan contact op met de klantenservice.

Image: A comprehensive layout of all components included in the MT5082 package, featuring the wall plate, TV brackets, various screws, washers, spacers, a magnetic bubble level, and an Allen key.

The package includes the wall plate assembly, TV brackets, a magnetic bubble level, various bolts (M4, M6, M8), washers, spacers, and an Allen key for adjustments.

Instellen en installeren

Volg deze stappen zorgvuldig voor een veilige installatie.

Stap 1: Monteer de wandplaat

Connect the two main sections of the wall plate using the provided screws. Ensure they are securely fastened.

Stap 2: Bevestig de beugels aan de tv

Select the appropriate bolts, washers, and spacers for your TV's VESA pattern. Attach the TV brackets to the back of your television. Ensure the side of the bracket with the locking mechanism faces outwards. Tighten securely.

Stap 3: Bevestig de muurplaat aan de muur

Position the assembled wall plate on your desired wall location. Use the magnetic bubble level to ensure it is perfectly horizontal. Mark the drilling points. For wood studs, drill pilot holes and secure the wall plate using the self-tapping screws. For concrete/brick walls, drill pilot holes, insert anchors, and then secure the wall plate with screws. Do not mount on drywall alone.

Image: A visual guide to the 1-2-3 easy installation process: 1. Attach brackets to TV, 2. Attach wall plate to wall, 3. Hang TV on the wall plate.

Image: Easy installation guidelines, showing successful mounting on wood studs (up to 24" apart with self-tapping screws) and concrete/brick walls (with anchors), and explicitly stating not to mount on drywall alone.

Step 4: Hang and Secure TV to Wall Plate

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure both brackets are properly seated. Pull down the locking cords to secure the TV in place. The cords will click when locked.

Installatie videogids

Gebruiksaanwijzing

Kantelverstelling

The Suptek MT5082 allows for a tilt adjustment of 0-8 degrees forward. To adjust the tilt, loosen the tilt adjustment screws on the TV brackets using the provided Allen key, set your desired angle, and then re-tighten the screws to secure the TV in position. This feature helps reduce glare and optimize your viewhoek.

Image: A woman sitting on the floor, viewing a wall-mounted TV that is tilted forward (0-8 degrees) to prevent glare, illustrating the anti-glaring feature.

Laag Profile Ontwerp

This mount features a low-profile design, keeping your TV approximately 1.5 inches from the wall. This minimizes the gap between the TV and the wall, providing a sleek and tidy appearance.

Afbeelding: Een kant view of a wall-mounted television, highlighting its low profile design which positions the TV approximately 1.5 inches from the wall, contributing to a space-saving and clean aesthetic.

Quick Lock and Release

The mount includes a quick lock and release mechanism for easy removal of the TV when needed. Simply pull down the cords located at the bottom of the TV brackets to unlock and lift the TV off the wall plate.

Image: A hand pulling down a cord from beneath a wall-mounted TV, illustrating the quick lock and release function that allows for easy removal of the television from the wall plate.

Onderhoud

Regular maintenance ensures the longevity and safety of your TV wall mount:

• Schoonmaak: Veeg de houder af met een zachte, droge doek om stof te verwijderen. Vermijd schurende reinigingsmiddelen of oplosmiddelen.
• Inspectie: Controleer regelmatig alle schroeven en verbindingen om er zeker van te zijn dat ze goed vastzitten. Draai ze indien nodig opnieuw aan.
• Gewichtscontrole: Do not place additional weight on the TV or mount beyond its specified capacity.

Probleemoplossing

Als u problemen ondervindt, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

• TV staat niet waterpas: Ensure the wall plate was installed level using the bubble level. Adjust the wall plate if necessary, or use the tilt adjustment feature to compensate for minor discrepancies.
• TV voelt instabiel aan: Verify that all mounting screws for both the wall plate and TV brackets are securely tightened. Ensure the wall type is appropriate and studs were properly located.
• Cannot tilt the TV: Loosen the tilt adjustment screws on the TV brackets. If they are too tight, the tilt mechanism will be locked.
• Cords are visible: The mount includes Velcro straps to manage cables and keep them tidy behind the TV.

Specificaties

Garantie-informatie

Suptek products are manufactured with quality and durability in mind. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the product packaging or contact Suptek customer support.

Klantenservice

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Suptek customer support. Our team is available to help you.

Online hulp: Visit the official Suptek website voor veelgestelde vragen, handleidingen voor probleemoplossing en contactmogelijkheden.

E-mailadres: Refer to your product packaging for the most current customer service email address.