1. Inleiding
This manual provides comprehensive instructions for the installation, operation, and maintenance of the PROFLO PF9312FVPK Dual Flush Valve Assembly. This product is designed for use with PROFLO PF9300 series dual flush tanks, offering an efficient solution for toilet flushing.
2. Veiligheidsinformatie
Lees alle instructies zorgvuldig door vóór installatie en gebruik. Het niet opvolgen van deze instructies kan leiden tot materiële schade of persoonlijk letsel.
- Sluit altijd de watertoevoer naar het toilet af voordat u met installatie- of onderhoudswerkzaamheden begint.
- Draag geschikte persoonlijke beschermingsmiddelen, zoals handschoenen en oogbescherming.
- Als u over een bepaald onderdeel van het installatieproces twijfelt, raadpleeg dan een gekwalificeerde loodgieter.
- Houd kleine onderdelen buiten bereik van kinderen.
3. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- PROFLO PF9312FVPK Dual Flush Valve Assembly
- Trip-hendel
- Alle benodigde hardware voor de installatie.
Image 1: The PROFLO PF9312FVPK Dual Flush Valve Assembly with its included trip lever and connecting hose.
4. Installatie en installatie
This dual flush valve assembly is designed for PROFLO PF9300 series dual flush tanks. Ensure your toilet tank is compatible before proceeding.
- Watertoevoer afsluiten: Locate the water supply valve behind the toilet and turn it clockwise until the water flow stops completely. Flush the toilet to empty the tank.
- Remove Old Flush Valve (if applicable): Disconnect the water supply line from the fill valve. Remove the old flush valve by unscrewing the mounting nut from underneath the tank. Clean the tank opening thoroughly.
- Installeer een nieuwe spoelklep: Place the new PROFLO PF9312FVPK Dual Flush Valve Assembly into the tank opening from the inside. Ensure the rubber gasket is properly seated. From underneath the tank, thread the mounting nut onto the flush valve and tighten it securely by hand. Do not overtighten.
- Connect Trip Lever: Attach the included trip lever to the designated connection point on the flush valve. Ensure the chain or cable from the trip lever is connected to the flush valve mechanism, allowing for proper activation of the dual flush feature. Adjust the chain/cable length to ensure both flush options operate correctly without excessive slack or tension.
- Herstel de watertoevoer: Reconnect the water supply line to the fill valve. Turn the water supply valve counter-clockwise to restore water flow to the toilet.
- Controleer op lekken: Allow the tank to fill. Inspect all connections for any signs of leaks. If leaks are present, turn off the water supply and re-tighten connections as needed.
5. Gebruiksaanwijzing
The PROFLO PF9312FVPK Dual Flush Valve Assembly provides two flushing options to conserve water:
- Gedeeltelijke spoeling: For liquid waste, gently press and release the trip lever. This activates a reduced water volume flush.
- Volledige spoeling: For solid waste, press and hold the trip lever down for a few seconds. This activates a full water volume flush.
Familiarize yourself with the feel of each flush option to optimize water usage.
6. Onderhoud
Regular maintenance ensures optimal performance and longevity of your dual flush valve.
- Schoonmaak: Periodically inspect the flush valve for mineral buildup or debris. Turn off the water supply, drain the tank, and gently clean components with a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage rubber seals.
- Verbindingsinspectie: Check the rubber seals and gaskets for wear, cracks, or deterioration. Worn seals can lead to leaks and inefficient flushing. Replace any damaged seals promptly.
- Hendelverstelling: Ensure the trip lever operates smoothly and the chain/cable has the correct tension for both flush options. Adjust if necessary.
7. Probleemoplossing
Raadpleeg de volgende tabel voor veelvoorkomende problemen en hun oplossingen:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Toilet loopt continu | Flapper/seal not seating properly; fill valve issue; trip lever chain too tight. | Inspect flush valve seal for debris or wear. Adjust trip lever chain to ensure proper slack. Check fill valve for proper shut-off. |
| Zwakke flush | Insufficient water level; partial blockage; flush valve not opening fully. | Adjust fill valve to increase water level. Check for obstructions in the bowl jets. Ensure trip lever chain allows full opening of the flush valve. |
| Het toilet spoelt niet door. | Trip lever disconnected; flush valve mechanism jammed. | Reconnect trip lever chain/cable. Inspect flush valve for any obstructions preventing movement. |
| Leaks from tank base | Losse bevestigingsmoer; beschadigde pakking. | Turn off water, drain tank, and tighten mounting nut. If leak persists, replace the flush valve gasket. |
If the problem persists after attempting these solutions, contact PROFLO customer support or a qualified plumber.
8. Specificaties
- Model: PF9312FVPK
- Verenigbaarheid: PROFLO PF9300 series dual flush tanks
- Artikelgewicht: 15.4 ons
- Productafmetingen: 1 x 1 x 1 inches (Note: These dimensions may refer to packaging or a general placeholder. Actual product dimensions for installation may vary.)
- Fabrikant: PROFLO
9. Garantie en ondersteuning
For warranty information or technical support, please refer to the official PROFLO webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.
PROFLO Klantenservice: Bezoek de PROFLO-winkel op Amazon.
