1. Inleiding
The EBYTE E28-2G4M12SX is a 2.4GHz wireless module designed for long-distance communication with ultra-low power consumption. This SMD module integrates the SX1281 RF chip, offering multiple physical layers and modulation methods including LoRa, FLRC, and GFSK. It is suitable for a wide range of applications such as smart home systems, security, tracking, and wireless distance measuring. This manual provides essential information for the proper setup, operation, and maintenance of the module.
2. Product voorbijview
The E28-2G4M12SX module is a compact SMD component featuring a built-in PCB antenna and an IPEX antenna connector for external antenna options. It utilizes a high-precision 52MHz crystal for stable performance.
Figure 2.1: EBYTE E28-2G4M12SX LoRa Wireless Module. This image shows the top view of the E28-2G4M12SX module, highlighting its compact size (22mm x 19mm) and the EBYTE branding.
2.1 Belangrijkste kenmerken
- RF-chip: Based on Semtech SX1281, supporting LoRa, FLRC, and GFSK modulation.
- Frequentie: 2.4GHz-band.
- Communicatieafstand: Up to 3km (tested).
- Transmissievermogen: Maximum 18mW, software multi-level adjustable.
- Gegevenssnelheid: Supports air data rates from 0.476kbps to 2Mbps.
- BLE-compatibiliteit: Compatible with Bluetooth Low Energy protocol.
- Variërende functie: Integrated Time-of-Flight (ToF) for distance measurement with accuracy as high as 1m.
- Voeding: 1.8V to 3.6V (optimal performance above 3.3V).
- Bedrijfstemperatuur: Industrial grade standard design, -40°C to 85°C.
- Antenne-opties: IPEX and PCB antenna.
- FIFO-rekening: Large capacity 256-Byte data buffer.
Figure 2.2: E28 Module Practical Functions. This diagram illustrates the key functionalities of the E28 module, including BLE protocol compatibility, multiple modulation modes (GFSK, FLRC, LoRa), ranging engine, and high-speed LoRa capabilities.
Figure 2.3: SX1280 2.4G LoRa Spread Spectrum. This image highlights the SX1280 chip solution, emphasizing its various physical layers and modulation methods (LoRa, FLRC, GFSK) for increased transmission distance and high-speed IoT performance. It also includes a note about the SPI hardware module.
3. Specificaties
| Parameter | Waarde |
|---|---|
| Model | E28-2G4M12SX |
| RF-chip | SX1281 |
| Frequentiebereik | 2.4 GHz |
| Modulation Methods | LoRa, FLRC, GFSK |
| Maximaal zendvermogen | 18mW (12dBm) |
| Communicatie afstand | Tot 3KM |
| Luchtgegevenssnelheid | 0.476kbps ~ 2Mbps |
| Voedingsvolumetage | 1.8V ~ 3.6V |
| Bedrijfstemperatuur | -40°C ~ 85°C |
| Antenne-interface | IPEX, PCB Antenna |
| Module afmetingen | 22mm x 19mm |
3.1 Internal Components and Quality
The E28-2G4M12SX module is built with high-quality components to ensure reliable performance. It features an original Semtech SX1280 chip solution, an industrial-grade high-precision low-temperature crystal oscillator, and carefully selected high-line brand capacitive and inductive devices. The design also incorporates impedance matching for optimal signal integrity.
Figure 3.1: Internal Components and Quality Features. This image displays the internal components of the module, highlighting the original Semtech SX1280 chip, industrial-grade crystal oscillator, impedance matching, and high-quality capacitive and inductive devices.
4. Pin Definitions and Circuit Diagram
The E28-2G4M12SX module communicates via an SPI interface. Proper connection to a Microcontroller Unit (MCU) is crucial for its operation. Below is a typical circuit diagram illustrating the pin connections.
Figure 4.1: E28-2G4M12SX Circuit Diagram. This diagram shows the typical wiring connections between the E28-2G4M12S module (U2) and an STM32L476 microcontroller (U1), detailing the SPI, GPIO, and power supply pins.
4.1 Pinbeschrijvingen
- VCC-nummer: Voedingingang (1.8V-3.6V).
- GND: Grond connectie.
- MOSI: Master Out Slave In (SPI data output from MCU, input to module).
- MISO: Master In Slave Out (SPI data input to MCU, output from module).
- SCK: Serial Clock (SPI clock signal).
- NSS: Slave Select (SPI chip select, active low).
- DIOx: Digital I/O pins, configurable for various functions (e.g., interrupt, busy status).
- NRESET: Reset pin (active low).
5. Instellen en programmeren
The E28-2G4M12SX is a pure RF transceiver module. It requires an external MCU to drive it and configure its registers via the SPI interface. Users must perform secondary development based on their specific application requirements.
5.1 Eerste installatiestappen
- Stroomaansluiting: Connect VCC to a stable power supply within the 1.8V to 3.6V range and GND to the system ground. Ensure the power supply can provide sufficient current.
- SPI-interface: Connect the MOSI, MISO, SCK, and NSS pins of the module to the corresponding SPI pins on your MCU.
- GPIO-aansluitingen: Connect the DIOx pins and NRESET to appropriate GPIOs on your MCU for control and status monitoring.
- Antenne: Connect an appropriate 2.4GHz antenna to the IPEX connector, or utilize the integrated PCB antenna.
5.2 Programming Guidelines
- SPI-communicatie: Implement SPI communication routines on your MCU to read from and write to the SX1281's internal registers.
- Registerconfiguratie: Configure the SX1281 registers for desired modulation mode (LoRa, FLRC, GFSK), frequency, spreading factor, bandwidth, coding rate, and transmission power.
- Pakketverwerking: Develop routines for sending and receiving data packets, including CRC checks and addressing if required.
- Variërende functie: For Time-of-Flight ranging, refer to the SX1281 datasheet for specific register settings and calculation methods.
- BLE Protocol: If using BLE, ensure your MCU firmware implements the necessary BLE stack and protocols.
6. Operating Modes and Modulation
The SX1281 chip supports various modulation methods, allowing flexibility for different application requirements.
- LoRa Mode: Offers long-range communication with high interference immunity, ideal for IoT applications where distance and reliability are critical.
- FLRC Mode: Provides high-speed data transmission with strong anti-interference performance, achieving up to 1.3 Mbps.
- GFSK Mode: Standard frequency shift keying, compatible with BLE protocol, suitable for shorter-range, higher-data-rate applications.
6.1 Ranging Function (Time-of-Flight)
The SX1281 integrates a Time-of-Flight (ToF) engine, enabling precise distance measurement. This feature is particularly useful for applications requiring location tracking or proximity sensing. The accuracy can be as high as 1 meter under optimal conditions.
7. Huidig verbruik
Understanding the module's current consumption is vital for power-sensitive applications. The E28-2G4M12SX is designed for ultra-low power operation.
Figure 7.1: Agilent 34410A Current Test Results. This graph illustrates the current consumption of the module in different states: Emission current (approx. 80.7956 mAdc), Receive current (approx. 13.3244 mAdc), and Sleep current (approx. 0.6009 µAdc).
- Emissiestroom: Approximately 80.7956 mAdc during transmission.
- Ontvangststroom: Approximately 13.3244 mAdc during reception.
- Slaapstroom: Approximately 0.6009 µAdc in low-power sleep mode.
8. Toepassingsscenario's
The versatility of the E28-2G4M12SX module makes it suitable for a broad range of wireless applications.
Figure 8.1: EBYTE Wireless Product Application Scenarios. This image displays various applications for EBYTE wireless products, including Industrial Manufacturing, Smart Home, Smart Farm, and Hotel Solutions.
- Smart Home: Home security alarm systems, remote keyless entry, smart sensors, building automation.
- Industriële toepassingen: Wireless industrial-grade remote control, short-distance replacement of signal cables, data acquisition.
- Smart Farm: Accurate monitoring of environmental details, statistical management, and risk detection.
- Tracking and Locating: Asset tracking, wireless distance measuring, wearable electronics, smart bracelets.
- Gezondheidszorg: Health care products, advanced meter reading architecture (AMI).
9. Onderhoud
To ensure the longevity and optimal performance of your E28-2G4M12SX module, follow these maintenance guidelines:
- Omgevingsomstandigheden: Operate the module within the specified temperature and humidity ranges. Avoid extreme conditions.
- Voeding: Use a stable and clean power supply. Voltage fluctuations can affect performance and module lifespan.
- Fysieke behandeling: Handle the module with care to prevent physical damage to pins or components. Use anti-static precautions during handling and installation.
- Schoonmaak: If necessary, gently clean the module with a soft, dry, anti-static brush. Avoid liquids or harsh chemicals.
- Firmware-updates: Keep your MCU firmware updated with the latest drivers and configurations for the SX1281 chip, as provided by EBYTE or Semtech, to benefit from performance improvements and bug fixes.
10. Probleemoplossing
This section addresses common issues you might encounter with the E28-2G4M12SX module.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| No communication with MCU | Incorrect SPI wiring; Incorrect SPI configuration (clock, mode); Power supply issue; Module not reset properly. | Verify all SPI connections (MOSI, MISO, SCK, NSS). Check MCU SPI settings. Ensure VCC and GND are correctly connected and within range. Toggle NRESET pin. |
| Poor wireless range or signal quality | Antenna not connected or damaged; Incorrect antenna type; Environmental interference; Low transmission power setting; Incorrect modulation parameters. | Ensure antenna is securely connected. Use a 2.4GHz antenna. Check for obstacles or other 2.4GHz devices. Increase transmission power in software. Verify LoRa/FLRC/GFSK parameters. |
| Hoog stroomverbruik | Module not entering sleep mode; Continuous transmission/reception. | Implement proper sleep mode commands in MCU firmware. Optimize communication intervals to reduce active time. |
| Ranging function inaccurate | Environmental factors (multipath, obstacles); Incorrect ToF calibration or settings; Insufficient signal strength. | Ensure clear line-of-sight between modules. Review SX1281 datasheet for ToF calibration procedures. Improve antenna placement or signal strength. |
11. Garantie en ondersteuning
EBYTE provides technical support and warranty services for its products. For detailed warranty information, technical assistance, or further inquiries, please contact EBYTE directly or visit their official webplaats.
Officieel Webwebsite: http://www.cdebyte.com/
When seeking support, please provide your module model (E28-2G4M12SX) and a detailed description of the issue.
