SLOER Stereo Ambient Reverb Pedal

Invoering

The Walrus Audio SLOER Stereo Ambient Reverb is an advanced effects pedal designed to create immersive, lush, and modulated soundscapes. Building upon the popular Slö series, the SLOER introduces additional reverb algorithms, stereo width control, new modulation wave shapes, and sample rate control, offering expanded sonic possibilities for guitarists and musicians.

This manual provides detailed instructions for setting up, operating, and maintaining your SLOER pedal, ensuring you get the most out of its extensive features.

Veiligheidsinformatie

• Use only a regulated 9V DC, center-negative power supply. Incorrect power supply may damage the unit and void the warranty.
• Do not expose the pedal to excessive moisture, rain, or extreme temperatures.
• Avoid dropping the pedal or subjecting it to severe impacts.
• Do not attempt to open the enclosure or modify the internal circuitry. Refer all servicing to qualified personnel.
• Buiten bereik van kinderen houden.

Inhoud van het pakket

• Walrus Audio SLOER Stereo Ambient Reverb Pedal
• Gebruiksaanwijzing
• Walrus Audio Product Information Card

Product voorbijview

The SLOER pedal features a robust die-cast enclosure with clearly labeled controls and input/output jacks. Familiarize yourself with the layout before connecting the pedal.

Figuur 1: Boven view of the Walrus Audio SLOER pedal, showcasing its controls and distinctive blue finish.

Bediening en aansluitingen

• Vervalknop: Controls the length of the reverb trail. Turn clockwise for longer, more expansive decays.
• Filterknop: Adjusts the tone of the reverb. Turn clockwise for brighter reverb, counter-clockwise for darker tones.
• Diepte Knop: Controls the intensity or amount of modulation applied to the reverb trail.
• Mengknop: Blends the wet (effected) signal with the dry (unaffected) signal. Fully counter-clockwise is dry, fully clockwise is wet.
• Width Toggle Switch: Selects the stereo width of the reverb. Options include Breed, Medium, En Smal.
• Stretch Slider: Bestuurt de sample rate of the reverb, affecting its texture and fidelity.
• Mode Rotary Dial: Selects one of five distinct reverb algorithms:
  • Dream (~): Latching pad reverb.
  • Light (^): High octave shimmer reverb.
  • Rain (ˇ): Delay tap diffusion reverb.
  • Dark (π): Lower octave reverb.
  • Rise (πˇ): Ambient swell reverb.
• Bypass-voetschakelaar: Schakelt het effect in of omzeilt het.
• Sustain Footswitch: Momentarily or latches the reverb trail, depending on the mode. Also used for preset selection.
• In Stereo (R) / In Mono (L) Jacks: Input jacks for connecting your instrument or other pedals. Use both for stereo input, or In Mono (L) for mono input.
• Out Stereo (R) / Out Mono (L) Jacks: Output jacks for connecting to an amplifier or other effects. Use both for stereo output, or Out Mono (L) for mono output.
• 9V DC-voedingsingang: Sluit een standaard 9V DC-voeding met negatieve pool in het midden aan.

Instellen

Follow these steps to connect your SLOER pedal to your audio setup:

1. Stroomaansluiting: Connect a standard 9V DC, center-negative power supply (not included) to the 9V DC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
2. Ingangsverbinding:
   • Voor Mono-ingang: Connect your instrument or the output of a preceding pedal to the In Mono (L) krik.
   • Voor Stereo-ingang: Connect the stereo output of a preceding device to both the In Stereo (R) En In Mono (L) aansluitingen.
3. Uitgangsverbinding:
   • Voor Mono Output: Sluit de Out Mono (L) jack naar je ampversterker of de ingang van het volgende pedaal in je keten.
   • Voor Stereo-uitgang: Sluit zowel de Out Stereo (R) En Out Mono (L) jacks naar twee afzonderlijke amplifiers or stereo input devices.
4. Oorspronkelijke instellingen: Before powering on, set all knobs to their middle position (12 o'clock) and the Width toggle to 'Medium' for a balanced starting point.

Afbeelding 2: Achter view of the SLOER pedal, illustrating the input, output, and power connections.

Operating the SLOER

The SLOER offers a wide range of ambient reverb textures through its intuitive controls. Experiment with each setting to discover its full potential.

Reverb-modi

De Modus rotary dial selects the core reverb algorithm:

• Dream (~): A lush, ethereal reverb that can be latched into an infinite pad by holding the Sustain footswitch. Ideal for ambient textures and drones.
• Light (^): Adds a shimmering high octave to the reverb trail, creating bright, angelic soundscapes.
• Rain (ˇ): Features a unique delay tap diffusion, creating a scattered, evolving reverb that can sound like raindrops or granular textures.
• Dark (π): Introduces a lower octave to the reverb, resulting in deep, brooding, and atmospheric sounds.
• Rise (πˇ): An ambient swell reverb that builds in volume over time, perfect for creating dramatic intros or transitions.

Modulation Wave Shapes (Secondary Function)

Each reverb mode has a secondary function accessible by holding down the Omzeilen footswitch and turning the Modus rotary dial. This allows you to select one of five different wave shapes for the modulation on the reverb trail:

• Sinusgolf: Smooth, gentle modulation.
• Triangle Wave: Even, symmetrical modulation.
• Sawtooth Wave: Asymmetrical, ramp-up or ramp-down modulation.
• Square Wave: Abrupt, on/off modulation.
• Random Wave: Unpredictable, evolving modulation.

De Diepte knob controls the intensity of this modulation.

Voorinstellingen

The SLOER features three onboard preset slots to save and recall your favorite settings:

• Een voorinstelling opslaan: To save your current settings, simultaneously press and hold both the Omzeilen En Aanhouden footswitches until the LED flashes, indicating the preset has been saved to the current slot.
• Een voorinstelling oproepen: To scroll through the three presets, simultaneously press and release both the Omzeilen En Aanhouden footswitches. The LED will change color to indicate the active preset (e.g., Green for Preset 1, Blue for Preset 2, Red for Preset 3).

Afbeelding 3: Gedetailleerd view of the SLOER's top panel controls, including knobs, toggle switch, slider, and rotary dial.

Onderhoud

To ensure the longevity and optimal performance of your SLOER pedal, follow these maintenance guidelines:

• Schoonmaak: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid abrasive cleaners or solvents, which can damage the finish and labels.
• Opslag: Bewaar het pedaal, wanneer het gedurende langere tijd niet wordt gebruikt, op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
• Verbindingen: Controleer regelmatig alle kabelverbindingen op slijtage. Zorg ervoor dat de aansluitingen vrij zijn van stof en vuil.

Probleemoplossing

If you encounter issues with your SLOER pedal, consult the table below for common problems and solutions:

Specificaties

Garantie-informatie

Walrus Audio pedals come with a limited lifetime warranty covering defects in materials and workmanship. This warranty applies to the original owner and is non-transferable. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper power supply. For detailed warranty terms and conditions, please visit the official Walrus Audio webplaats.

Steun

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Walrus Audio customer support. You can find contact information and additional resources on the official Walrus Audio webwebsite:

www.walrusaudio.com/support

Please have your pedal's model number (900-1082BE) and purchase information ready when contacting support.