Gebruikershandleiding voor de XOSS G+ Gen2 GPS-fietscomputer en de Vortex Speed-cadanssensor

1. Inleiding

This manual provides detailed instructions for the setup, operation, and maintenance of your XOSS G+ Gen2 GPS Bike Computer and Vortex Speed Cadence Sensor. Please read this manual thoroughly before using the product to ensure proper function and to maximize your cycling experience.

2. Inhoud van het pakket

Controleer of alle hieronder vermelde artikelen in uw pakket zitten:

• 1 x XOSS G+ Gen2 Hoofdeenheid
• 1 x Vortex Speed Cadence Sensor
• 1 x USB-C-kabel
• 2 x rubberen ringen
• 1 x Yardstick Holder (Mount)
• 1 x Protective Rubber Pad
• 1 x Gebruikershandleiding

This image shows all items included in the package: the XOSS G+ Gen2 main unit, Vortex speed cadence sensor, USB-C cable, rubber rings, yardstick holder, protective rubber pad, and user manual.

3. Product voorbijview

The XOSS G+ Gen2 is a GPS bike computer designed to track and display essential cycling data. It features a 2.2-inch LCD screen, IPX7 water resistance, and a 28-hour battery life. The included Vortex sensor provides accurate speed and cadence data via ANT+ and Bluetooth connectivity.

The XOSS G+ Gen2 GPS Bike Computer displays various cycling data, accompanied by the Vortex Speed Cadence Sensor.

Belangrijkste kenmerken:

• Uitgebreide schermweergave van gegevens: Up to 24 data points, with 10 displayed on a single screen.
• Verlengde batterijduur: 500mAh rechargeable lithium battery provides up to 28 hours of use.
• USB-C-interface: Handige en moderne oplaadpoort.
• ANT+/Bluetooth Connectivity: Supports heart rate monitors, cadence sensors, and other external devices.
• IPX7 waterdicht: Designed for use in various weather conditions.
• Strava-synchronisatie: Easily upload and share ride data.
• Vortex Dual Mode Sensor: Functions as either a speed or cadence sensor.

4. Instellen

4.1 Montage van de fietscomputer

1. Attach the protective rubber pad to the yardstick holder.
2. Secure the yardstick holder to your bicycle's handlebar or stem using the provided rubber rings. Ensure it is firmly attached and positioned for optimal viewind.
3. Slide the XOSS G+ Gen2 main unit onto the yardstick holder until it clicks into place.

4.2 Mounting the Vortex Speed Cadence Sensor

The Vortex sensor can be mounted on the wheel hub for speed data or on the crank arm for cadence data. Only one mode is functional at a time per sensor. To obtain both speed and cadence data simultaneously, two sensors are required.

1. Voor snelheid: Attach the Vortex sensor to the front or rear wheel hub using the provided rubber ring. Ensure it is securely fastened and does not interfere with wheel rotation.
2. Voor Cadence: Attach the Vortex sensor to the inside of your bicycle's crank arm using the provided rubber ring. Ensure it is securely fastened and does not interfere with pedaling.

The Vortex sensor can operate in either speed or cadence mode. Two sensors are required for simultaneous speed and cadence data.

4.3 Eerste inschakeling en GPS-acquisitie

1. Press and hold the power button (usually the rightmost button) to turn on the XOSS G+ Gen2.
2. Place the device outdoors in an open area to acquire a GPS signal. The GPS icon on the screen will become solid when a signal is acquired. This may take a few moments.

4.4 Verbinding maken met de XOSS-app

1. Download the XOSS app from your smartphone's app store (available on iOS and Android).
2. Open de app en maak een account aan of log in.
3. Follow the in-app instructions to pair your XOSS G+ Gen2 bike computer and Vortex sensor. This typically involves searching for devices and confirming the connection.

4.5 Pairing External Sensors (Heart Rate, Additional Cadence/Speed)

The XOSS G+ Gen2 supports ANT+ and Bluetooth connectivity for additional sensors.

The XOSS G+ Gen2 supports both ANT+ and Bluetooth connections for external sensors.

1. Ensure your external sensor (e.g., heart rate monitor) is active and within range of the bike computer.
2. Navigate to the sensor pairing menu on your XOSS G+ Gen2 (refer to the device's on-screen menu for specific steps).
3. Select the sensor type and initiate the search. Once detected, confirm the pairing.

5. Gebruiksaanwijzing

5.1 Knopfuncties

The XOSS G+ Gen2 typically features three buttons:

• Linkerknop (afspelen/pauzeren): Starts and pauses ride recording.
• Middle Button (Lap/Reset): Records laps during a ride; long press to reset ride data.
• Right Button (Power/Menu): Powers the device on/off; short press to cycle through display screens or enter menu options.

5.2 Display Modes and Data Fields

The G+ Gen2 can display up to 24 different data points, with 10 visible on a single screen. Short press the right button to cycle through available display screens.

The XOSS G+ Gen2 screen can display up to 10 data fields simultaneously, providing comprehensive ride information.

5.3 Een rit vastleggen

1. Ensure GPS signal is acquired (solid GPS icon).
2. Press the left button (Play) to start recording your ride.
3. During the ride, you can press the left button again to pause recording. Press it again to resume.
4. To end the ride, long press the left button. The ride data will be saved.

5.4 Synchronizing Data with XOSS App and Strava

After completing a ride, you can upload your data to the XOSS app and synchronize it with Strava.

After a ride, connect the bike computer to the XOSS app on your smartphone to upload data and synchronize with Strava.

1. Open the XOSS app on your smartphone and ensure Bluetooth is enabled.
2. The app will automatically connect to your G+ Gen2 (if previously paired).
3. Follow the app's instructions to upload your ride data.
4. If you have linked your Strava account within the XOSS app, your ride data will automatically synchronize with Strava.

5.5 Vortex Sensor Mode Switching

The Vortex sensor's mode (speed or cadence) can be switched via the XOSS app. For Android users, this is typically done through the 'Record - Bluetooth' interface within the app.

6. Onderhoud

6.1 Het apparaat opladen

The XOSS G+ Gen2 is equipped with a 500mAh rechargeable lithium battery, offering up to 28 hours of usage. Charge the device using the provided USB-C cable.

The XOSS G+ Gen2 features a 500mAh rechargeable lithium battery, providing up to 28 hours of operation.

• Connect the USB-C cable to the charging port on the device and to a USB power source.
• De batterij-indicator op het scherm geeft de oplaadstatus aan.
• Ensure the charging port cover is fully closed after charging to maintain water resistance.

6.2 Waterbestendigheid (IPX7)

The XOSS G+ Gen2 and Vortex sensor are IPX7 waterproof, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for use in rainy weather.

The XOSS G+ Gen2 is IPX7 waterproof, suitable for use in rainy conditions. Ensure the USB-C port cover is closed.

Belangrijk: After riding in wet conditions, dry the computer thoroughly and ensure the USB-C charging port cover is securely closed to prevent water ingress.

6.3 Reinigen

Clean the device and sensor with a soft, damp doek. Vermijd het gebruik van agressieve chemicaliën of schurende materialen die het scherm of de c kunnen beschadigenasing.

6.4 Vortex Sensor Battery

The Vortex sensor operates on replaceable batteries. When the sensor's battery is low, its indicator light may flash, or it may fail to connect. Refer to the sensor's specific instructions for battery type and replacement procedures.

7. Probleemoplossing

• Geen GPS-signaal: Ensure the device is outdoors in an open area. Initial GPS acquisition may take longer. If issues persist, try restarting the device.
• Sensor maakt geen verbinding: Check if the sensor's battery is charged. Ensure the sensor is correctly mounted and awake (e.g., by rotating the wheel or crank). Verify Bluetooth/ANT+ is enabled on the bike computer and try re-pairing the sensor through the device settings or XOSS app.
• Data Not Synchronizing to App/Strava: Ensure your bike computer is connected to the XOSS app via Bluetooth. Check your internet connection. Verify that your Strava account is correctly linked within the XOSS app.
• Inaccurate Speed/Cadence Data: Ensure the Vortex sensor is correctly installed for the desired mode (speed on hub, cadence on crank). If using a single sensor, confirm the mode is correctly set via the XOSS app.
• Batterij raakt snel leeg: Battery life can vary based on usage and environmental factors. Ensure the device is fully charged before each ride. Reduce screen brightness or turn off unnecessary features if extended battery life is needed.

8. Specificaties

9. Garantie en ondersteuning

9.1 Garantie-informatie

The XOSS G+ Gen2 GPS Bike Computer and Vortex Speed Cadence Sensor come with a één jaar garantie vanaf de aankoopdatum. Deze garantie dekt fabricagefouten en storingen bij normaal gebruik. Schade veroorzaakt door verkeerd gebruik, ongevallen, ongeoorloofde wijzigingen of onjuist onderhoud valt niet onder deze garantie.

9.2 Klantenservice

For technical assistance, warranty claims, or further inquiries, please contact XOSS customer support through their official website or the contact information provided with your product packaging. When contacting support, please have your product model and purchase details ready.