1. Inleiding
Thank you for choosing the Alphacool Eisblock Aurora RX 7900XTX Reference GPU Water Block with Backplate. This product is designed to provide superior cooling performance for your AMD Radeon RX 7900XTX reference graphics card, ensuring optimal thermal management and enhancing system stability. This manual provides essential information for the proper installation, operation, and maintenance of your water block.
2. Veiligheidsinformatie
Please read and understand all safety instructions before proceeding with installation. Failure to follow these guidelines may result in personal injury, product damage, or voiding of your warranty.
- Haal altijd de stekker van uw computer uit het stopcontact voordat u onderdelen installeert of verwijdert.
- Draag antistatische handschoenen of gebruik een antistatische polsband om schade door elektrostatische ontlading (ESD) aan gevoelige elektronische componenten te voorkomen.
- Handle the water block and graphics card with care to avoid physical damage.
- Ensure all fittings are securely tightened to prevent leaks. Use only compatible coolants.
- Houd kleine onderdelen en gereedschap uit de buurt van kinderen.
- If you are unsure about any step, consult a qualified technician or Alphacool support.
3. Inhoud van het pakket
Controleer of alle hieronder vermelde componenten in uw pakket aanwezig zijn:
- Alphacool Eisblock Aurora RX 7900XTX Reference GPU Water Block
- Alphacool Eisblock Aurora RX 7900XTX Backplate
- Montageschroeven en ringen
- Thermal pads (pre-cut or sheet)
- Thermal compound (Alphacool Subzero)
- RGB adapter cable (if applicable)
- Installatiehandleiding (dit document)
4. Installatie en installatie
Follow these steps carefully to install your Alphacool Eisblock Aurora water block and backplate.
- Prepare the Graphics Card:
Carefully remove the stock cooler and backplate from your AMD Radeon RX 7900XTX reference graphics card. Clean the GPU die and memory chips thoroughly with isopropyl alcohol to remove any residual thermal paste or pads.
- Thermische pads aanbrengen:
Apply the provided thermal pads to the designated areas on the graphics card PCB, covering the VRMs, VRAM, and other heat-generating components as indicated in the product diagram. Ensure proper contact and coverage.
- Breng thermische pasta aan:
Apply a small amount of Alphacool Subzero thermal compound to the center of the GPU die. A pea-sized amount is typically sufficient. The water block's jet plate design will help spread it evenly upon installation.
- Mount the Water Block:
Carefully align the Alphacool Eisblock Aurora water block with the mounting holes on the graphics card PCB. Gently lower the water block onto the GPU, ensuring even pressure. Secure the water block using the provided screws, tightening them in a diagonal pattern to ensure even contact pressure. Do not overtighten.
Afbeelding 4.1: Boven view of the Alphacool Eisblock Aurora RX 7900XTX Water Block, showcasing the clear acrylic top, chrome-plated copper base, and G1/4" ports for liquid cooling connections. The internal fin structure and flow paths are visible.
Image 4.2: Direct top-down view of the Alphacool Eisblock Aurora RX 7900XTX Water Block, highlighting the precision-machined cooling channels and the central micro-fin array designed for efficient heat transfer from the GPU die.
- Installeer de achterplaat:
Align the Alphacool Eisblock Aurora backplate with the corresponding mounting holes on the rear of the graphics card PCB. Secure it with the remaining screws. The backplate provides structural support and additional passive cooling for the rear of the PCB.
Image 4.3: The Alphacool Eisblock Aurora RX 7900XTX Backplate shown installed on the graphics card, providing a clean aesthetic and structural reinforcement to the PCB.
Afbeelding 4.4: Een samengestelde view of the Alphacool Eisblock Aurora RX 7900XTX Water Block and its accompanying backplate, illustrating the complete cooling solution for the GPU.
Afbeelding 4.5: Onderkant view of the Alphacool Eisblock Aurora RX 7900XTX Backplate, showing the mounting points and the engraved 'RX 7900XTX' model designation.
- Connect Fittings and Tubing:
Install your G1/4" fittings into the water block ports. Connect your custom loop tubing, ensuring all connections are secure. Perform a leak test for at least 24 hours with the system powered off before powering on your computer.
- RGB-verlichting aansluiten (optioneel):
If your water block features digital addressable RGB LEDs, connect the included RGB adapter cable to a compatible motherboard header or RGB controller. Refer to your motherboard manual for proper connection and software control.
Afbeelding 4.6: Een example of the Alphacool Eisblock Aurora RX 7900XTX Water Block with its integrated digital addressable RGB illumination active, showing a purple light effect through the clear acrylic.
5. Bedrijfsrichtlijnen
Once installed and leak-tested, the Alphacool Eisblock Aurora water block operates as part of your custom liquid cooling loop. Ensure your pump is running and coolant is flowing before powering on your graphics card.
- Monitor GPU temperatures using appropriate software to confirm effective cooling.
- Maintain proper coolant levels in your reservoir.
- Adjust fan speeds on your radiators as needed to optimize cooling performance and noise levels.
- The chrome-plated copper design ensures efficient heat transfer and a durable, aesthetically pleasing afwerking.
6. Onderhoud
Regelmatig onderhoud draagt bij aan de lange levensduur en optimale prestaties van uw vloeistofkoelsysteem.
- Koelvloeistof vervangen: Replace your coolant every 6-12 months, or as recommended by the coolant manufacturer, to prevent buildup and maintain performance.
- Systeem doorspoelen: Periodically flush your entire loop with distilled water to remove any accumulated debris or old coolant.
- Visuele inspectie: Regularly inspect tubing, fittings, and the water block for any signs of leaks, corrosion, or algae growth.
- Schoonmaak: If necessary, disassemble the water block to clean the micro-fins. Use a soft brush and distilled water. Avoid abrasive cleaners.
7. Probleemoplossing
Als u problemen ondervindt, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:
- High GPU Temperatures:
- Ensure pump is running and coolant is flowing.
- Check for air bubbles trapped in the water block; tilt your system to dislodge them.
- Verify proper application of thermal paste and pads.
- Ensure radiator fans are functioning and oriented correctly.
- Check for blockages in the loop; flush if necessary.
- Lekken:
- Schakel het systeem onmiddellijk uit.
- Identificeer de bron van het lek.
- Tighten fittings or replace faulty O-rings/components.
- Perform a thorough leak test before restarting the system.
- RGB-verlichting werkt niet:
- Check the connection to the motherboard or RGB controller.
- Ensure the RGB software is installed and configured correctly.
- Verify that the RGB header on your motherboard is enabled in the BIOS.
8. Specificaties
| Modelnummer | 1023718 |
| Verenigbaarheid | AMD Radeon RX 7900XTX Reference Design Graphics Cards |
| Material (Water Block) | Chrome-plated Copper (Base), Acrylic (Top) |
| Fin Structure | 0.4 mm fin thickness, 0.4 mm fin distance |
| Havens | G1/4" |
| Verlichting | Digital Addressable RGB (dRGB) |
| Included Thermal Interface Material | Alphacool Subzero Thermal Compound, Thermal Pads |
9. Garantie en ondersteuning
Alphacool products are manufactured to high standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official Alphacool webwebsite of neem contact op met uw verkoper.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Alphacool support portal or contact their customer service department. Provide your product model number (1023718) and proof of purchase when seeking support.
Alfacool Webwebsite: www.alphacool.com
