Gebruikershandleiding voor de LANCOM R&S Unified Firewall UF-60 LTE

1. Inleiding

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Veiligheidsinformatie

Neem de volgende veiligheidsmaatregelen in acht om schade aan het apparaat of letsel aan personeel te voorkomen:

• Zorg ervoor dat het apparaat op een stabiele, vlakke ondergrond staat.
• Stel het apparaat niet bloot aan vocht, extreme temperaturen of direct zonlicht.
• Gebruik alleen de voedingsadapter die bij het apparaat is geleverd.
• Open het apparaat niet casing. Laat alle onderhoudswerkzaamheden over aan gekwalificeerd personeel.
• Houd ventilatieopeningen vrij om oververhitting te voorkomen.

3. Inhoud van het pakket

Controleer of alle artikelen in het pakket aanwezig zijn:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Stroomadapter
• Two LTE Antennas
• Ethernet-kabel
• Snelstartgids

4. Apparaat voorbijview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Indicatoren op het voorpaneel

• ETH0-ETH3 LEDs: Geef de activiteit en de verbindingsstatus voor de betreffende Ethernet-poorten aan.
• LTE-LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• Systeemstatus-LED: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• Stroomverbruik: Wordt aangesloten op de meegeleverde voedingsadapter.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE-antenneconnectoren: For attaching the external LTE antennas.
• SIM-kaartsleuf: For inserting a SIM card for LTE connectivity.
• Resetknop: Wordt gebruikt om de fabrieksinstellingen te herstellen.

5. Instellen

5.1. Hardware-installatie

1. Antennes bevestigen: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Plaats simkaart: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Netwerkkabels aansluiten:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Sluit stroom aan: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Toegang tot de initiële configuratie

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Open een web browser en voer het standaard IP-adres in (bijv. http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Het apparaat bedienen

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Toegang tot de beheerinterface

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Open een web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• Netwerk configuratie: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Firewallregels: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Systeeminstellingen: Manage user accounts, firmware updates, backups, and logging.

7. Onderhoud

7.1. Firmware-updates

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. Schoonmaken

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuratieback-up

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Probleemoplossing

In dit gedeelte worden veelvoorkomende problemen besproken waarmee u te maken kunt krijgen.

• Geen stroom:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• Kan geen toegang krijgen tot de beheerinterface:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Technische specificaties

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Garantie en ondersteuning

10.1. Garantie-informatie

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems website voor gedetailleerde informatie.

10.2. Technische ondersteuning

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Fabrikant Webwebsite: www.lancom-systems.com