1. Inleiding
Thank you for choosing the GLOBE Electric 64000012 30-inch 4-Light Track Lighting fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting system. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image 1.1: The GLOBE Electric 64000012 30-inch 4-Light Track Lighting fixture.
2. Belangrijke veiligheidsinformatie
Om het risico op brand, elektrische schokken of letsel te verminderen, dient u altijd de volgende basisveiligheidsmaatregelen in acht te nemen:
- Lees alle instructies: Before installing or using this fixture.
- Elektrische veiligheid: Alle elektrische aansluitingen moeten voldoen aan de lokale voorschriften, verordeningen of de National Electric Code (NEC). Raadpleeg een gekwalificeerde elektricien als u niet bekend bent met de juiste elektrische bedrading.
- Stroom loskoppelen: Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Aarding: Zorg ervoor dat het apparaat goed geaard is om een elektrische schok te voorkomen.
- Lampvereisten: Use only GU10/Twist and Click Base MR16 50W bulbs (sold separately). Do not exceed the maximum wattage.
- Warmte: Halogen bulbs can become very hot. Allow bulbs to cool before touching.
- Dimbare functie: If using a dimmer, ensure it is compatible with GU10 bulbs and installed by a qualified professional.
- Alleen voor gebruik binnenshuis: This fixture is designed for indoor use in dry locations.
3. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- Track Light Fixture (1)
- Montage hardware (1 set)
- Instructieblad (1)
Afbeelding 3.1: Example of product packaging, showing the track light fixture.
4. Productspecificaties
| Functie | Specificatie |
|---|---|
| Merk | Globe Elektrisch |
| Modelnaam | Praten |
| Onderdeelnummer | 64000012 |
| Kleur | Black, Pratt |
| Materiaal | Metaal |
| Productafmetingen | 12 cm L x 76.2 cm B x 18.32 cm H (4.75" L x 30" B x 7.25" H) |
| Energiebron | Vast bedraad |
| Installatietype | Plafondmontage |
| Aantal lichtbronnen | 4 |
| Lampvoet | GU10 |
| Max Watttage per lamp | 50 Watt |
| Deeltage | 120 Volt |
| Speciale kenmerken | Dimmable, Matte Black Finish, Pivoting Track Heads |
| Binnen-/buitengebruik | Binnen |
Afbeelding 4.1: Productafmetingen voor het plannen van de installatie.
5. Installatie en installatie
5.1. Voordat u begint
- Zorg ervoor dat de stroom bij de stroomonderbreker is uitgeschakeld.
- Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).
- Review all local electrical and building codes.
5.2. Installatiestappen
- Bedrading voorbereiden: Trek de elektrische draden voorzichtig uit de aansluitdoos.
- Draden aansluiten: Connect the fixture's wires to the house wires (black to black, white to white, ground to ground) using wire connectors. Secure with electrical tape.
- Bevestigingspunt: Attach the mounting bracket to the outlet box. Secure the fixture base to the mounting bracket using the provided screws.
- Lampen installeren: Insert four GU10/Twist and Click Base MR16 50W bulbs (sold separately) into each track head. A suction cup tool (often included with GU10 bulbs) can assist with installation.
- Herstel de stroom: Zet de stroom weer AAN via de stroomonderbreker.
Image 5.1: The track lighting fixture installed in a living room setting.
Image 5.2: The track lighting fixture providing illumination over a desk area.
6. Bediening
6.1. Basisbediening
Once installed and powered, the fixture operates via your wall switch. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity to create the desired atmosphere.
6.2. De lichtkoppen afstellen
The four cylindrical track heads are designed to pivot, allowing you to direct light precisely where needed. Gently grasp each light head and rotate or tilt it to your preferred angle. This feature is ideal for accent lighting or illuminating specific areas.
Image 6.1: Adjustable heads allow for directional lighting.
Image 6.2: The fixture is fully dimmable with a compatible dimmer switch.
7. Onderhoud
7.1. Schoonmaken
Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
7.2. Vervanging van de lamp
Ensure power is OFF and bulbs have cooled completely before attempting replacement. This fixture uses GU10/Twist and Click Base MR16 50W bulbs. To replace, gently push the bulb into the socket and twist counter-clockwise to remove. Insert the new bulb by pushing it in and twisting clockwise until secure. A suction cup tool can be helpful for this process, especially if the bulbs are difficult to grip.
Image 7.1: Reminder of GU10 bulb requirement for the fixture.
8. Probleemoplossing
If you experience issues with your track lighting, refer to the table below for common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Het licht gaat niet aan | No power to the fixture; Loose wiring; Faulty bulb | Check circuit breaker; Verify wire connections; Replace bulb. |
| Lichten flikkeren | Loose bulb; Incompatible dimmer switch; Loose wiring | Ensure bulbs are seated correctly; Use a compatible dimmer; Check wire connections. |
| Lampen branden snel door | Onjuiste lamp watttage; Poor ventilation; Voltage fluctuaties | Use correct 50W GU10 bulbs; Ensure proper air circulation; Consult an electrician for voltage problemen. |
9. Garantie en ondersteuning
9.1. Garantie-informatie
This product comes with no warranty. Please refer to your retailer's return policy for any issues upon purchase.
9.2. Klantenservice
For further assistance or inquiries, please contact Globe Electric customer service through their official webwebsite of de winkel waar het product is gekocht.
