Handleiding voor de Okin Model JLDQ-11 & JLDQ.11.156.333 elektrische relaxfauteuilmotor

Belangrijke veiligheidsinformatie

Please ensure proper electrical safety when handling and installing the motor. Always disconnect power before servicing. Do not use outdoors or in wet environments. Consult a professional if you are unsure about installation or troubleshooting.

Product voorbijview

The Okin Refined-R Model: JLDQ.11.156.333 is an original Okin JLDQ motor designed for power recliners and electric lift chairs. This actuator motor set includes one motor and two connectors, facilitating both switch hand control and power supply connections.

Verenigbaarheid

Different actuator/motors are not compatible with every frame. The frame has strict demands for the actuator/motor's minimum install dimension, stroke, and plugs. This motor is suggested to replace OKIN model JLDQ.11.156.333, and can also replace JLDQ.11.156.333A/D/K/P/Z series. While there might be minor differences, these do not affect use. Always check your motor brand and model first to ensure proper fit and function.

Instellen en installeren

1. Voorbereiding: Ensure the recliner chair is unplugged from the power source. Carefully flip the chair over to access the underside mechanism.
2. Identify Old Motor: Locate the existing actuator motor. Note how it is mounted and connected.
3. Bedrading loskoppelen: Disconnect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply from the old motor.
4. Oude motor verwijderen: Unscrew or unbolt the old motor from the chair frame. Keep all hardware for reuse.
5. Nieuwe motor installeren: Position the new Okin JLDQ.11.156.333 motor in the same location as the old one. Secure it to the chair frame using the original bolts or appropriate hardware.
6. Bedrading aansluiten: Connect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply to the new motor. Ensure connections are secure.
7. Testfunctionaliteit: Carefully return the chair to its upright position. Plug the chair back into a power source and test the reclining function using the hand control.

Gebruiksaanwijzing

The Okin JLDQ.11.156.333 motor operates in conjunction with your recliner's existing hand control. Simply press the appropriate buttons on your hand control to extend or retract the footrest and recline the chair. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating and ensure longevity.

Onderhoud

• Schoonmaak: Wipe clean with a dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Regelmatige inspectie: Controleer de motor en de aansluitingen regelmatig op slijtage, beschadigingen of losse bedrading.
• Vermijd vloeistoffen: Keep the motor and electrical components away from liquids to prevent damage and electrical hazards.

Probleemoplossing

• Motor draait niet: First, troubleshoot the switch and power supply. Ensure all plugs are securely connected and the power source is active.
• Partial Movement: Check for any obstructions in the recliner mechanism. Verify that the motor is correctly installed and not binding.
• Ongebruikelijke geluiden: Inspect the motor and its mounting for any loose parts or signs of friction. Ensure the motor is properly lubricated if applicable (consult manufacturer for specific lubrication guidelines).

Technische specificaties

Garantie en ondersteuning

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Ensure you have your model number (JLDQ.11.156.333) and any purchase details available when seeking support.