1. Inleiding
Thank you for choosing the Onforu 65W LED Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Two Onforu 65W LED Motion Sensor Outdoor Flood Lights.
2. Belangrijke veiligheidsinformatie
WAARSCHUWING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances. Always turn off power at the circuit breaker before installation or servicing.
- Niet aansluiten op een dimmer.
- Ensure the power supply is 120V AC, 60Hz.
- Probeer het apparaat niet te demonteren of aan te passen.
- Houd brandbare materialen uit de buurt van de lamp.
- Suitable for wet locations. Ensure all connections are properly sealed.
3. Inhoud van het pakket
Controleer of alle onderdelen aanwezig en onbeschadigd zijn voordat u met de installatie begint.
- Onforu 65W LED Motion Sensor Outdoor Flood Light (2 units)
- Montagebeugel
- Rubberen pakking
- Draadmoeren
- Montageschroeven
- Gebruiksaanwijzing
4. Producteigenschappen
- Hoge helderheid en energie-efficiëntie: 6500 Lumens output from 65W LED, equivalent to 450W traditional bulbs.
- Verstelbaar ontwerp: Three adjustable heads provide a 270-degree detection zone for wide coverage.
- Verbeterde bewegingssensor: 180-degree sensing angle, detecting motion up to 72 feet away. Adjustable lighting time from 10 seconds to 7 minutes.
- Duurzaam en weerbestendig: IP65 waterproof and dust-proof rating, made of die-cast aluminum for excellent heat dissipation and long lifespan.
- Kleurtemperatuur: 6500K Daylight White for clear, bright illumination.
Image 4.1: Key features of the Onforu LED Motion Sensor Outdoor Flood Light.
Image 4.2: Aluminum construction for efficient heat dissipation.
5. Installatiehandleiding
Voordat u begint: Ensure power is OFF at the circuit breaker. Recommended installation height is 8.2-16.4 feet (2.5-5 meters).
5.1 Montageopties
The fixture can be mounted on a wall or soffit.
Image 5.1: Soffit Mounted vs. Wall Mounted installation examples.
5.2 Bedradingsinstructies
- Schakel de stroom uit via de hoofdschakelaar.
- Bevestig de montagebeugel aan de aansluitdoos met behulp van de meegeleverde schroeven.
- Sluit de draden aan:
- Black (L): Connect to the live wire from the power supply.
- White (N): Connect to the neutral wire from the power supply.
- Green (GND): Connect to the ground wire from the power supply.
- Ensure the rubber gasket is properly seated between the fixture and the mounting surface to maintain IP65 rating.
- Bevestig het lamplichaam aan de montagebeugel.
- Adjust the light heads to the desired angles.
- Schakel de stroom weer in bij de stroomonderbreker.
Image 5.2: Wiring diagram and product dimensions.
Afbeelding 5.3: Visuele handleiding voor de installatiestappen.
6. Gebruiksaanwijzing
The motion sensor has three adjustable knobs for customization:
- SENS (gevoeligheid): Adjusts the detection distance. Turn towards '-' for lower sensitivity (up to 10m) or '+' for higher sensitivity (up to 22m/72ft).
- LUX (Ambient Light): Determines when the sensor activates. Turn towards the moon icon for activation only at night (less than 10 LUX). Turn towards the sun icon for activation during both day and night.
- TIJD (tijdsvertraging): Sets how long the light stays on after motion is detected. Adjustable from 10 seconds to 7 minutes. Turn towards '-' for shorter duration or '+' for longer duration.
Image 6.1: Motion sensor adjustment knobs for LUX, SENS, and TIME.
7. Onderhoud
- Maak het armatuur regelmatig schoon met een zachte, droge doek.amp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
- Periodically check electrical connections for tightness and signs of wear.
- Ensure the motion sensor lens is clear of dirt, dust, or obstructions for optimal performance.
8. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Licht gaat niet aan. | No power; incorrect wiring; LUX setting too low. | Check circuit breaker; verify wiring connections; adjust LUX setting towards 'sun' icon. |
| Licht blijft continu branden. | Continuous motion detected; TIME setting too long; wiring issue. | Ensure no constant motion in detection area; adjust TIME setting to shorter duration; check wiring (live and neutral might be reversed). |
| Bewegingssensor detecteert niet. | SENS setting too low; obstructions; incorrect mounting height. | Adjust SENS setting towards '+'; clear obstructions from sensor view; verify mounting height is within recommended range. |
| Licht flikkert. | Losse bedrading; onstabiele stroomvoorziening. | Check and tighten all wiring connections; consult an electrician for power supply issues. |
9. Specificaties
| Functie | Specificatie |
|---|---|
| Merk | Onforu |
| Modelnummer | BDB55G-3 |
| Wattage | 65 Watt |
| Helderheid | 6500 Lumen |
| Kleurtemperatuur | 6500 Kelvin (daglichtwit) |
| Bewegingssensorhoek | 180° |
| Bewegingsdetectie afstand | Tot 72 voet |
| Aanpassing tijdvertraging | 10 seconden tot 7 minuten |
| Waterbestendigheidsniveau | IP65 waterdicht |
| Materiaal | Metal (Die-cast Aluminum) |
| Deeltage | 120 Volt |
| Productafmetingen | 10.7"L x 5.8"B x 4.7"H |
| Aantal lichtbronnen | 3 (Verstelbare koppen) |
| Installatietype | Muurbevestiging |
10. Garantie en ondersteuning
This Onforu product comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Onforu customer support.
For technical support, troubleshooting assistance, or any inquiries, please contact Onforu customer service through the retailer's platform or visit the official Onforu webplaats.
