Invoering
This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your FIELDMANN FDW 201602-E High-Pressure Washer. Please read this manual thoroughly before using the appliance and keep it for future reference.
Belangrijke veiligheidsinformatie: Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Ensure the appliance is used only with a suitable power supply and water source. Keep children and pets away from the operating area.
Product voorbijview
Image: The FIELDMANN FDW 201602-E High-Pressure Washer, featuring its compact design, hose, and nozzle. This image illustrates the overall appearance of the product.
The FIELDMANN FDW 201602-E is a powerful electric high-pressure washer designed for various cleaning tasks. It features a robust 1600W motor, delivering a maximum pressure of 130 bar and a flow rate of 420 liters per hour. Key components include a self-priming metal pump, a 5-meter high-pressure hose, a 5-meter power cable, an adjustable nozzle, and integrated wheels for a soap bottle.
Instellen
- Uitpakken: Haal alle onderdelen voorzichtig uit de verpakking. Controleer of alle onderdelen die op de paklijst staan vermeld aanwezig en onbeschadigd zijn.
- Montage:
- Attach the high-pressure hose to the washer's outlet and the spray gun. Ensure connections are secure to prevent leaks.
- Connect the adjustable nozzle to the spray gun.
- If applicable, attach any handles or wheels according to the diagrams in the full manual (not provided here).
- Aansluiting watertoevoer:
- Connect a garden hose (not supplied) to the water inlet of the pressure washer.
- Ensure the water supply hose is free from kinks and has an adequate flow rate. The unit features a self-priming pump, but a steady water supply is crucial.
- Turn on the water supply fully before starting the pressure washer.
- Voedingsaansluiting:
- Plug the 5-meter power cable into a grounded electrical outlet (220-240V, 50/60Hz).
- Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
Gebruiksaanwijzing
- De eenheid starten:
- With the water supply on and the unit connected to power, press the ON/OFF switch to the 'ON' position.
- Squeeze the trigger on the spray gun to release air from the system and allow water to flow through until a steady stream is achieved.
- Adjusting Pressure and Nozzle:
- The FDW 201602-E features an adjustable nozzle. Rotate the nozzle head to change the spray pattern from a concentrated jet to a wider fan spray.
- Test het sproeipatroon altijd eerst op een onopvallende plek om beschadiging van het oppervlak te voorkomen.
- Using Detergent (Soap Bottle Wheels):
- Fill the integrated soap bottle with an appropriate pressure washer detergent.
- Attach the soap bottle to the designated inlet on the pressure washer (refer to product diagrams for exact location).
- Engage the detergent function (usually by selecting a low-pressure nozzle setting or a specific detergent nozzle, if provided).
- Apply detergent to the surface, allow it to soak, then rinse with high-pressure water.
- Afsluiten:
- Zet de aan/uit-schakelaar in de 'UIT'-stand.
- Draai de watertoevoer dicht.
- Druk de trekker van het spuitpistool in om de resterende druk in het systeem te laten ontsnappen.
- Disconnect the power cable and water hose.
Onderhoud
- Schoonmaak: Veeg na elk gebruik de buitenkant van de hogedrukreiniger af met een adamp cloth. Ensure no dirt or debris is blocking the air vents.
- Mondstukreiniging: Als het mondstuk verstopt raakt, gebruik dan het meegeleverde reinigingsgereedschap (indien aanwezig) of een dun draadje om eventuele verstoppingen te verwijderen.
- Waterinlaatfilter: Controleer en reinig regelmatig het waterinlaatfilter om te voorkomen dat er vuil in de pomp komt.
- Opslag:
- Drain all water from the pump, hose, and spray gun before storing.
- Bewaar de hogedrukreiniger in een droge, vorstvrije omgeving.
- Rol de hogedrukslang en de stroomkabel netjes op.
- Winterklaar maken: In cold climates, it is crucial to protect the unit from freezing. Use a pump protector or antifreeze solution designed for pressure washers to prevent internal damage.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Unit start niet | Geen stroomvoorziening; AAN/UIT-schakelaar staat uit; aardlekschakelaar is uitgeschakeld. | Check power connection; Ensure switch is ON; Reset GFCI. |
| Lage of geen druk | Insufficient water supply; Clogged nozzle; Air in pump; Kinked hose. | Ensure water supply is fully open; Clean nozzle; Squeeze trigger to purge air; Straighten hose. |
| Waterlekken | Losse verbindingen; beschadigde O-ringen of afdichtingen. | Draai alle verbindingen goed vast; controleer en vervang beschadigde O-ringen/afdichtingen. |
| Motor stopt tijdens bedrijf | Overheating; Voltage drop; Thermal overload activated. | Allow unit to cool down; Check power supply; Reduce usage time. |
Specificaties
- Model: FDW 201602-E
- Deeltage/Frequentie: 220-240V, 50/60Hz
- Maximaal vermogen: 1600 W
- Maximale druk: 130 staven
- Stroomsnelheid: 420 liter per uur
- Type pomp: Metal, Self-priming
- Lengte stroomkabel: 5 meter
- Lengte hogedrukslang: 5 meter
- Type mondstuk: Verstelbaar
- Afmetingen (L x B x H): 35.3x32.2x50.7cm
- Gewicht: 8.46 kg
- Conforme specificaties: CE, CSA
Garantie en ondersteuning
For warranty information, technical support, or to inquire about replacement parts, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
Fabrikant: VELDMANN
For further assistance, visit the official Fieldmann website of neem contact op met de klantenservice. www.fieldmann.com
