Handleiding voor de Phanteks PH-VGPUKT4.0_03 Gen4 verticale GPU-beugel en 220 mm PCI-E 4.0 riser-kabelset

1. Inleiding

This instruction manual provides detailed guidance for the installation and proper use of the Phanteks PH-VGPUKT4.0_03 Gen4 Vertical GPU Bracket and its accompanying 220mm PCI-E 4.0 Riser Cable Kit. This product is designed to allow vertical placement of your graphics card within compatible ATX chassis, ensuring full PCI-E Gen4 speeds and maintaining system stability. It supports graphics cards ranging from 1-slot to 4-slot sizes.

2. Inhoud van het pakket

Controleer of alle hieronder vermelde componenten in uw pakket aanwezig zijn:

Phanteks Gen4 Vertical GPU Bracket
220mm PCI-E Gen4 x16 Riser Cable
Mounting Screws (various types for bracket and GPU attachment)
Rubber Pads for GPU support
Instructieblad

Phanteks Vertical GPU Bracket Kit Contents — Figure 2.1: All components included in the Phanteks PH-VGPUKT4.0_03 package, showing the vertical GPU bracket, riser cable, screws, and rubber pads.

3. Installatie en installatie

The Phanteks Gen4 Vertical GPU Bracket is designed for chassis with an open PCI slot design, such as the Phanteks Eclipse P300A, P360A, and P400A. Other ATX chassis may require modification for compatibility. A minimum of 7 PCI slots are required for installation.

3.1. De beugel voorbereiden

Attach the PCI-E Gen4 x16 Riser Cable to the vertical GPU bracket using the provided screws. Ensure a secure connection.
Carefully align your graphics card with the riser cable slot and the bracket's mounting holes. Secure the graphics card to the bracket using the appropriate screws.
Apply the included rubber pads to the bottom of the bracket to provide additional support and prevent GPU sag once installed in the chassis.

Phanteks Vertical GPU Bracket with Riser Cable — Figure 3.1: The Phanteks vertical GPU bracket assembled with the 220mm PCI-E Gen4 x16 riser cable.

Phanteks Vertical GPU Bracket Rear View — Afbeelding 3.2: Achter view of the vertical GPU bracket, showing the mounting points for the graphics card and chassis.

Phanteks Vertical GPU Bracket Rubber Pads — Figure 3.3: The included rubber pads, which should be affixed to the bottom of the bracket for stability and to prevent GPU sag.

3.2. Installing into the Chassis

Ensure your chassis has an open PCI slot design (no bars crossing the PCIe slot area). Remove any necessary PCI slot covers from your chassis.
Carefully insert the assembled bracket and graphics card into the chassis. The riser cable's motherboard connector should align with an available PCI-E x16 slot on your motherboard.
Secure the bracket to the chassis using the provided thumbscrews or standard case screws. Ensure the graphics card is level and firmly seated.
Connect any necessary power cables to your graphics card.

For a visual guide on vertical GPU bracket installation, please refer to the video below. Note that while the video may feature a PCIe 5.0 bracket, the general installation principles are applicable to this PCIe 4.0 model.

Video 3.1: General installation guide for a vertical GPU mount bracket. This video demonstrates the process of attaching a graphics card to a vertical bracket and installing it into a PC chassis. While the video shows a PCIe 5.0 bracket, the steps are similar for the Phanteks PCIe 4.0 bracket.

4. Gebruiksaanwijzing

Once installed, your graphics card will operate normally through the PCI-E Gen4 x16 Riser Cable. The dual-layer design and individually shielded cables ensure high stability and signal integrity, allowing your Gen4 graphics card to run at full speed without performance compromise.

Ensure all power connections to the graphics card are secure.
Verify that the riser cable is fully seated in the motherboard's PCI-E x16 slot.
For optimal performance, ensure adequate airflow within your chassis, especially around the vertically mounted graphics card.

5. Onderhoud

Regular maintenance can help ensure the longevity and performance of your vertical GPU bracket and riser cable:

Periodically check all screw connections to ensure they remain tight.
Inspect the riser cable for any signs of wear or damage.
Keep the interior of your PC chassis clean and free of dust to maintain optimal airflow and cooling for your graphics card.

6. Probleemoplossing

If you encounter issues after installing the vertical GPU bracket, consider the following troubleshooting steps:

Geen weergave-uitvoer: Double-check that the riser cable is fully seated in both the graphics card and the motherboard's PCI-E slot. Ensure all power cables to the graphics card are connected.
Verminderde prestaties: Verify that your motherboard's BIOS/UEFI settings are configured to use PCI-E Gen4 for the slot where the riser cable is connected. Some motherboards may default to an older generation.
GPU Sag: Ensure the rubber pads are correctly placed and that the bracket is securely fastened to the chassis.
Verenigbaarheid: Confirm your chassis has an open PCI slot design and sufficient clearance for the vertically mounted GPU.

7. Specificaties

Functie	Detail
Merk	Fanteks
Modelnummer	PH-VGPUKT4.0_03
PCI-E Generation	PCI-E 4.0 x16
Lengte van de riserkabel	220 mm
Required PCI Slots	7 (ATX chassis)
GPU-ondersteuning	1-slot up to 4-slot GPUs
Chassis-compatibiliteit	Chassis with open PCI slot design (e.g., Phanteks P300A/P360A/P400A)
Artikelgewicht	1.08 pond
Pakket afmetingen	9.57 x 6.46 x 6.42 inch

8. Garantie en ondersteuning

Voor garantie-informatie en technische ondersteuning kunt u terecht bij de officiële Phanteks-website. webwebsite of neem rechtstreeks contact op met hun klantenservice. Bewaar uw aankoopbewijs voor eventuele garantieclaims.

	Installatiehandleiding voor de Phanteks Premium verticale GPU-beugel Uitgebreide installatiehandleiding voor de Phanteks Premium verticale GPU-beugel (modellen PH-PGPUKT5.0_DBK01, PH-PGPUKT5.0_DWT01). Behandelt de leveringsomvang, voorbereiding, installatie van de beugel (universeel/NVIDIA), moederbordoffset, voedingafdekking, hoekafstelling en installatie van de GPU in de behuizing.
	Installatiehandleiding voor de Phanteks Premium verticale GPU-beugel Uitgebreide installatiehandleiding voor de Phanteks Premium Vertical GPU Bracket, met gedetailleerde instructies voor het verticaal monteren van uw grafische kaart voor een betere esthetiek en luchtstroom. Inclusief onderdelenlijst, stapsgewijze instructies en compatibiliteitsinformatie.
	Installatiehandleiding voor de Phanteks NV5 pc-behuizing Uitgebreide installatiehandleiding voor de Phanteks NV5 pc-behuizing, met informatie over hardware-installatie, het verwijderen van panelen en D-RGB-bediening. Inclusief specificaties en meertalige ondersteuning.
	Phanteks REVOLT Voeding Installatiehandleiding Uitgebreide installatiehandleiding voor de Phanteks REVOLT-serie voedingen, met gedetailleerde informatie over kabelaansluitingen, PSU-installatie en functies voor hybride ventilatorregeling.
	Phanteks Eclipse G500A installatiehandleiding Uitgebreide installatiehandleiding voor de Phanteks Eclipse G500A pc-behuizing, met informatie over het verwijderen van het paneel, de installatie van de hardware, de montage van de opbergruimte en D-RGB-bediening.
	Installatiehandleiding Phanteks XT Pro Ultra: Drievoudige SSD-beugel en behuizingsfuncties Uitgebreide installatiehandleiding voor de Phanteks XT Pro Ultra pc-behuizing, met details over de configuratie met drie SSD-beugels, D-RGB-verlichting, veiligheidsmaatregelen, benodigde ruimte voor componenten en installatiestappen voor de hardware. Inclusief modelinformatie en specificaties.

Phanteks PH-VGPUKT4.0_03