Gebruikershandleiding SUPERMICRO MBD-X12SPA-TF-O E-ATX Servermoederbord

1. Inleiding

This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

The Supermicro MBD-X12SPA-TF-O is an E-ATX server motherboard designed to support 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors with a single LGA-4189 socket. It features the Intel C621A chipset, extensive memory support up to 4TB DDR4-3200MHz, multiple PCIe 4.0 slots, and M.2 NVMe support with RAID capabilities.

2. Product voorbijview

The MBD-X12SPA-TF-O motherboard is engineered for high-performance server and workstation applications, offering robust connectivity and expansion options.

Figuur 1: Top-down view of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. This image displays the layout of the CPU socket, DIMM slots, PCIe slots, and various connectors.

Belangrijkste kenmerken:

• Processorondersteuning: Single Socket LGA-4189 (Socket P+) for 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors (up to 270W TDP).
• Chipset: Intel C621A.
• Geheugen: 16 DIMM slots supporting up to 4TB 3DS ECC RDIMM/LRDIMM DDR4-3200MHz, and Intel Optane Persistent Memory.
• Uitbreidingsslots: 4 PCIe 4.0 x16, 3 PCIe 4.0 x8 (in x16 slot).
• Opslag: 4 PCIe 4.0 x4 M.2 slots (2260/2280/22110, M-Key) with RAID 0,1,5,10 support (VROC key required for RAID). 8 SATA3 (6 Gbps) ports via Intel C621A controller with RAID 0,1,5,10.
• Netwerken: Dual LAN (Intel I210-AT, Marvell AQC113) plus dedicated IPMI LAN (Realtek RTL8211F PHY).
• Grafisch: 1 VGA port dedicated for IPMI.

3. Installatie en installatie

3.1 Veiligheidsmaatregelen

• Always disconnect the power cord from the power supply before handling any components.
• Draag een antistatische polsband om schade door elektrostatische ontlading (ESD) te voorkomen.
• Handle the motherboard by its edges, avoiding contact with components and connectors.
• Ensure proper ventilation in the server chassis.

3.2 Componentinstallatie

1. CPU-installatie:

   Carefully align the 3rd Gen Intel Xeon Scalable or Intel Xeon W-3300 processor with the LGA-4189 socket. Ensure the triangular mark on the CPU aligns with the mark on the socket. Gently lower the CPU into the socket without forcing it. Secure the retention mechanism.

2. CPU-koeler installeren:

   Apply thermal paste to the CPU surface if not pre-applied on the cooler. Mount the compatible LGA-4189 CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the designated header on the motherboard.

3. Geheugen (RAM) installatie:

   Open the clips on both ends of the DIMM slots. Align the memory module's notch with the key in the DIMM slot. Insert the module firmly until the clips snap into place. Refer to the motherboard's silkscreen for recommended DIMM population order for optimal performance (e.g., A1, B1, C1, D1 first).
4. M.2 NVMe SSD Installation:

   Locate the M.2 slots. Remove the M.2 standoff screw. Insert the M.2 SSD into the slot at a 30-degree angle. Push down the SSD and secure it with the standoff screw. Ensure proper thermal pad application if provided.

5. PCIe-kaartinstallatie:

   Open the retention clip of the desired PCIe slot. Align the PCIe card with the slot and press it down firmly until it is fully seated. Secure the card with a chassis screw.

6. SATA Drive Connection:

   Connect SATA data cables from your storage drives to the SATA3 ports on the motherboard. Connect power cables from the power supply to the SATA drives.
7. Voedingsaansluiting:

   Connect the 24-pin ATX main power connector and the 8-pin (or dual 8-pin) CPU power connectors from the power supply to the motherboard.

8. Aansluitingen op het voorpaneel:

   Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio) to their respective pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.

4. Gebruiksaanwijzing

4.1 Eerste keer inschakelen en BIOS-instellingen

1. After all components are installed and connected, connect the power cord to the power supply and turn on the power switch.
2. Press the power button on the chassis.
3. During POST (Power-On Self-Test), press VERDELEN or F2 (or as indicated on screen) to enter the BIOS/UEFI setup utility.
4. Configure boot order, enable/disable specific features, and set system time/date as needed. Save changes and exit BIOS.

4.2 Installatie besturingssysteem

Insert your operating system installation media (USB drive or DVD). Boot from the installation media and follow the on-screen prompts to install your preferred operating system (e.g., Windows Server, Linux distribution).

4.3 Stuurprogramma-installatie

After OS installation, install all necessary drivers for the motherboard chipset, LAN controllers, and any other integrated components. Drivers can typically be found on the Supermicro support website voor uw specifieke model.

4.4 IPMI Remote Management

The motherboard features a dedicated IPMI LAN port for remote management. Connect an Ethernet cable to this port. Access the IPMI web interface via een web browser using the IP address assigned to the IPMI. Default login credentials are often provided in a separate IPMI manual or on the Supermicro website. IPMI allows for remote power control, system monitoring, and KVM-over-IP functionality.

5. Onderhoud

• Stofverwijdering: Regularly clean dust from the motherboard, CPU cooler, and chassis fans using compressed air. Ensure the system is powered off and unplugged before cleaning.
• BIOS-/firmware-updates: Periodically check the Supermicro website for updated BIOS and firmware versions. Apply updates as recommended to improve stability, performance, and security. Follow the update instructions carefully.
• Kabelbeheer: Ensure all cables are neatly routed to promote optimal airflow and prevent interference.
• Milieubeheersing: Operate the server in a clean, temperature-controlled environment to prevent overheating and component degradation.

6. Probleemoplossing

Veelvoorkomende problemen en oplossingen:

• Geen stroom:
  • Controleer of de voeding is aangesloten en ingeschakeld.
  • Verify all power cables (24-pin ATX, CPU 8-pin) are securely connected to the motherboard.
  • Ensure the front panel power button cable is correctly connected.
• Geen scherm:
  • Ensure the monitor is connected to the correct video output (VGA for IPMI, or a dedicated GPU if installed).
  • Reseat memory modules and expansion cards.
  • Controleer de CPU-installatie en de aansluiting van de koeler.
• Systeeminstabiliteit/crashes:
  • Check CPU and system temperatures. Ensure adequate cooling.
  • Verify memory modules are correctly installed and compatible. Run memory diagnostics.
  • Werk het BIOS en de drivers bij naar de nieuwste versies.
  • Test components individually if possible (e.g., one RAM stick at a time).
• Storage Drive Not Detected:
  • Controleer de SATA/M.2-kabelverbindingen.
  • Zorg ervoor dat de schijven zijn ingeschakeld.
  • Verify drive detection in BIOS/UEFI settings.
  • For M.2 RAID, ensure VROC key is installed and configured correctly.

For further assistance, refer to the Supermicro support webwebsite of neem contact op met hun technische ondersteuning.

7. Specificaties

8. Garantie en ondersteuning

For warranty information and technical support, please visit the official Supermicro webwebsite of neem contact op met uw verkooppunt. Bewaar uw aankoopbewijs voor garantieclaims.

Supermicro Official Webwebsite: www.supermicro.com