Lorex 4K 16-Channel NVR User Manual

1. Inleiding

The Lorex 4K 16-Channel NVR (Network Video Recorder) is a sophisticated surveillance solution designed to capture and manage high-resolution video footage. This NVR supports up to 4K (8MP) resolution recording, ensuring detailed and clear video evidence. It features smart motion detection, voice control capabilities, and fusion technology for enhanced security monitoring.

Equipped with a built-in Hard Disk Drive (HDD) and supporting up to two 10TB drives, the NVR provides ample storage for 24/7 recording. Its plug-and-play Power-over-Ethernet (PoE) installation simplifies camera connections, making setup efficient. The system also supports audio recording on every channel and includes an auto-recovery feature to ensure continuous surveillance even after power interruptions.

Figuur 1.1: Voorzijde view of the Lorex 4K 16-Channel NVR, showcasing het strakke ontwerp en de bedieningselementen op het voorpaneel.

2. Installatie en installatie

This section guides you through the initial setup and physical installation of your Lorex NVR system. Ensure all components are present before beginning.

2.1 Uitpakken en componenten controleren

Carefully unpack the NVR and all accessories. Verify that the following items are included:

• Lorex 4K 16-Channel NVR unit
• Stroomadapter
• USB-muis
• Ethernetkabel
• HDMI-kabel
• Snelstartgids (indien van toepassing)

2.2 De ​​NVR aansluiten

Volg deze stappen om uw NVR aan te sluiten:

1. Verbinding maken met een beeldscherm: Use the provided HDMI cable to connect the NVR's HDMI output port to an HDMI input on your monitor or TV. This is essential for initial setup and direct viewind.
2. USB-muis aansluiten: Sluit de USB-muis aan op een beschikbare USB-poort op de NVR (aan de voor- of achterkant).
3. Netwerkverbinding: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your router or network switch. This provides network access for remote viewing and updates.
4. Connect Cameras (PoE): For Lorex PoE cameras, connect them directly to the NVR's PoE ports using Ethernet cables. The NVR will provide both power and video signal through these ports, simplifying wiring. The NVR features 16 PoE ports.
5. Inschakelen: Sluit de voedingsadapter aan op de voedingsingang van de NVR en steek deze vervolgens in een stopcontact. De NVR zal automatisch inschakelen.

Figure 2.1: Rear panel of the NVR, illustrating the various input/output ports including HDMI, VGA, Ethernet (LAN and PoE), USB, and audio connections.

Figure 2.2: Diagram illustrating the simplicity of Power over Ethernet (PoE) connectivity, where a single Ethernet cable provides both power and data to the camera from the NVR.

3. Bediening

This section covers the basic operation of your Lorex NVR, including live viewing, recording, and playback.

3.1 Eerste installatiewizard

Upon first power-on, the NVR will guide you through an initial setup wizard. This wizard typically includes:

• Taalselectie
• Password creation for the admin account
• Datum- en tijdinstellingen
• Network configuration (DHCP is usually default)
• Hard drive initialization (if prompted)

3.2 Levend View

After completing the setup wizard, the NVR will display the live view van alle aangesloten camera's. Je kunt schakelen tussen één camera. view, multi-camera grids en sequentie views met behulp van de bedieningselementen op het scherm of de USB-muis.

• 4K-resolutie: The NVR supports live viewing in up to 4K (8MP) resolution at 30 frames per second (fps) for compatible cameras.
• Digitale zoom: Use the digital zoom feature to magnify specific areas of interest in the live view.
• Audiobewaking: The NVR supports audio on every channel, allowing you to hear audio from cameras with built-in microphones or connected external microphones.

3.3 Opnemen en afspelen

The NVR is configured for 24/7 continuous recording by default. It also supports event-based recording triggered by motion detection.

• Smart Motion Detection: Leverage advanced motion detection features to reduce false alerts and trigger recordings only when a person or vehicle is detected.
• Area Search: Utilize the Area Search function to quickly locate events by pinpointing activity in specific zones during playback.
• Afspelen: Toegang tot opgenomen footage through the playback menu. You can search by date, time, and event type.
• Opslag: The NVR comes with a built-in 4TB HDD and supports up to two 10TB hard drives for extensive storage capacity. Storage mirroring can be configured for continuous data backup.

3.4 Remote Access (Lorex Cloud App)

The Lorex Cloud app allows you to view leef fotage, play back recordings, and receive motion push notifications on your smartphone or tablet. Download the app from your device's app store and follow the in-app instructions to add your NVR.

4. Onderhoud

Proper maintenance ensures the longevity and optimal performance of your Lorex NVR system.

4.1 Algemeen onderhoud

• Plaats de NVR in een goed geventileerde ruimte om oververhitting te voorkomen.
• Avoid exposing the NVR to direct sunlight, moisture, or extreme temperatures.
• Reinig de buitenkant van de NVR met een zachte, droge doek. Gebruik geen vloeibare reinigingsmiddelen of spuitbussen.

4.2 Beheer van harde schijven

The NVR's hard drive will automatically overwrite the oldest footage once it reaches full capacity. No manual intervention is typically required for continuous recording.

• Capaciteit: The NVR supports up to two 10TB hard drives. If you wish to expand storage, consult the Lorex support website for compatible drives and installation instructions.
• Gegevensback-up: Voor kritische footage, regularly back up important video clips to an external USB drive or network storage.

4.3 firmware-updates

Controleer regelmatig de Lorex-ondersteuning. website for firmware updates. Firmware updates can improve system performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update carefully.

4.4 Herstel na stroomuitval

The NVR features auto-recovery after power failures. In the event of a power outage, the system is designed to automatically reboot and resume recording once power is restored, ensuring minimal disruption to your surveillance.

5. Probleemoplossing

This section provides solutions to common issues you might encounter with your Lorex NVR.

5.1 No Video Output on Display

• Controleer kabels: Ensure the HDMI or VGA cable is securely connected to both the NVR and the display. Try a different cable or display if possible.
• Weergave-invoer: Verify that your monitor or TV is set to the correct input source (e.g., HDMI 1, VGA).
• NVR Power: Confirm the NVR is powered on and its power indicator light is active.
• Resolutiecompatibiliteit: If the display supports lower resolutions, try connecting the NVR to a different display or consult the NVR's manual for instructions on changing output resolution (if accessible).

5.2 Camera's geven geen beeld weer

• Power-over-Ethernet (PoE): Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port indicator lights on the NVR are active for the connected cameras.
• Kabelintegriteit: Inspect Ethernet cables for any damage. Try swapping cables or ports.
• Verenigbaarheid: This NVR is designed for use with Lorex IP cameras. Compatibility with third-party cameras is not guaranteed.
• Camera Power Cycle: Disconnect and reconnect the camera's Ethernet cable to power cycle it.

5.3 Op afstand Viewing Issues (Lorex Cloud App)

• Netwerkverbinding: Ensure the NVR is connected to the internet via its LAN port and your router. Verify your mobile device has a stable internet connection.
• NVR Online Status: Check the NVR's network settings to confirm it has obtained an IP address and is showing as "online" or "connected" to the Lorex Cloud service.
• Substream for Remote Viewind: For optimal performance over mobile networks or slower internet connections, the Lorex Cloud app often defaults to a lower-resolution substream. This is normal behavior to ensure smooth streaming. Full 4K resolution is typically best viewed directly from the NVR's HDMI output.
• Routerinstellingen: Ensure your router is not blocking necessary ports for the NVR's cloud connection. Consult your router's manual or ISP for port forwarding information if needed, though Lorex Cloud usually uses P2P for simpler setup.
• Wi-Fi Extenders/Mesh Networks: Some network configurations, particularly those using Wi-Fi extenders or mesh networks that suppress broadcast packets, may interfere with the NVR's ability to communicate with cameras or the cloud service. Ensure the NVR and cameras are on the same logical network segment.

5.4 Hard Drive Not Recording

• HDD-status: Check the NVR's system settings to verify the hard drive status. It should be "Normal" or "Initialized". If not, you may need to format or initialize the HDD.
• Opnameschema: Ensure the recording schedule is properly configured for continuous or motion-triggered recording.
• HDD Fault: If the hard drive is faulty, it may need replacement. Contact Lorex support for assistance.

6. Specificaties

Detailed technical specifications for the Lorex 4K 16-Channel NVR (Model N882A64B).

7. Garantie en ondersteuning

For warranty information, technical support, or further assistance with your Lorex NVR, please refer to the official Lorex webNeem contact op met de klantenservice via de website of via de website. Bewaar uw aankoopbewijs en het serienummer van het product voor een snellere service.

You can also find additional resources, FAQs, and software downloads on the Lorex support portal.

Online bronnen:

• Lorex-officieel Webwebsite: www.lorex.com
• Lorex Cloud App: Available on iOS App Store and Google Play Store.