Invoering
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hitachi WT-P200Y Automatic Shallow Well Pump. Please read this manual thoroughly before using the product and keep it for future reference.
The Hitachi WT-P200Y is an inverter-controlled automatic shallow well pump designed for reliable water supply. It features an easy-to-use control panel for convenient operation.
Veiligheidsinformatie
Neem altijd de volgende veiligheidsmaatregelen in acht om letsel of schade aan het product te voorkomen.
- Ensure the power supply matches the pump's requirements (Single Phase 100V, 50/60Hz).
- Do not operate the pump without water, as this can cause damage.
- All electrical connections must be performed by a qualified electrician in accordance with local codes.
- Houd kinderen en onbevoegd personeel uit de buurt van de pomp als deze in werking is.
- Schakel de stroom uit voordat u onderhouds- of reparatiewerkzaamheden uitvoert.
- Bescherm de pomp tegen temperaturen onder het vriespunt.
Instellen en installeren
Een correcte installatie is cruciaal voor optimale prestaties en een lange levensduur van uw pomp.
- Uitpakken: Haal de pomp voorzichtig uit de verpakking. Controleer op eventuele transportschade.
- Plaatsing: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight, rain, and freezing. Ensure adequate space for maintenance.
- Leidingaansluitingen:
- Connect the suction pipe (25mm, Rc1) to the pump's suction inlet. Ensure an airtight seal to prevent air leaks.
- Connect the discharge pipe (25mm, Rc1) to the pump's discharge outlet.
- Use appropriate fittings and sealants to prevent leaks.
- Primen: Before initial operation, the pump must be primed.
- Remove the priming plug (if applicable) or fill the pump casing with water until full.
- Replace the plug securely.
- Elektrische aansluiting: Connect the power cord to a grounded 100V, 50/60Hz power outlet. Ensure the circuit is protected by a suitable circuit breaker.
Figuur 1: Diagram showing the Hitachi WT-P200Y pump's dimensions and performance curve. The diagram illustrates the pump's physical measurements, including discharge and suction outlets, and a graph detailing the relationship between total head (m) and discharge volume (L/min) under various operating pressures and suction heights. This helps in planning installation and understanding operational limits.
Gebruiksaanwijzing
The WT-P200Y features an easy-to-use control panel for selecting operating modes.
- Initiële opstart:
- After ensuring proper installation and priming, plug in the pump.
- The pump will automatically start when water is demanded (e.g., opening a faucet) and stop when demand ceases.
- Selecting Operating Pressure Modes: The control panel allows selection of different pressure modes. Refer to the panel diagram for specific settings.
- Standaardmodus: Provides balanced pressure for general household use.
- Hogedrukmodus: For applications requiring stronger water pressure.
- Low Pressure Mode: For situations where reduced pressure is desired.
- Automatische bediening: The pump is designed for automatic operation. It will detect water demand and adjust its output accordingly, thanks to its inverter technology.
Figuur 2: Image displaying the easy-to-use control panel of the Hitachi WT-P200Y pump. The panel allows users to select from various operating pressure modes (Standard, High, Low) to suit different water usage requirements. This image also highlights the wear-resistant elastic casing technology.
Onderhoud
Regelmatig onderhoud zorgt voor een lange levensduur en een efficiënte werking van uw pomp.
- Maandelijkse controles:
- Inspect for any visible leaks around connections.
- Check for unusual noises or vibrations during operation.
- Jaarlijkse inspectie:
- Clean any debris from the pump's exterior.
- Verify the condition of the power cord and plug.
- For internal component checks, it is recommended to contact a qualified service technician.
- Winterklaar maken (voor koude klimaten):
- Drain all water from the pump and piping to prevent freezing damage.
- Store the pump in a warm, dry place if possible, or insulate it thoroughly.
Figuur 3: Een interne view of the Hitachi WT-P200Y pump, highlighting the innovative Y-shaped impeller design and the wear-resistant elastic casing. This design contributes to the pump's high lift capability and durability, reducing wear from sand and debris in the water.
Probleemoplossing
Raadpleeg dit gedeelte voor veelvoorkomende problemen en hun oplossingen.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Pomp start niet. | No power supply; tripped circuit breaker; motor overload. | Check power connection; reset circuit breaker; allow motor to cool down. |
| De pomp draait wel, maar er komt geen water uit. | Pump not primed; air leak in suction line; low water level in well; clogged suction filter. | Re-prime the pump; check all suction connections for leaks; verify well water level; clean suction filter. |
| Lage waterdruk. | Partial clog in piping; incorrect pressure mode selected; worn impeller. | Check and clear piping; select higher pressure mode on control panel; contact service for impeller inspection. |
| De pomp draait regelmatig. | Small leak in plumbing system; pressure switch malfunction. | Inspect plumbing for leaks; contact service for pressure switch check. |
Specificaties
| Functie | Detail |
|---|---|
| Model | WT-P200Y |
| Merk | Hitachi |
| Energiebron | Type stroomkabel |
| Deeltage | 100 Volts (Single Phase) |
| Frequentie | 50/60Hz |
| Nominaal vermogen | 200W |
| Wattage (Stroomverbruik) | 440 W |
| Productafmetingen (L x B x H) | 35.6x37.6x49cm |
| Productgewicht | 14 kg |
| Maximale stroomsnelheid | 35 liter/minuut |
| Maximale hefhoogte | 12 meter |
| Kleur | Grijs |
| Meegeleverde accessoires | Gebruiksaanwijzing |
Figuur 4: Een generaal view of the Hitachi WT-P200Y Automatic Shallow Well Pump. This image provides an overall visual reference of the product's design and appearance.
Garantie en ondersteuning
Dit product wordt geleverd met een 1 jaar fabrieksgarantie Vanaf de aankoopdatum. Bewaar uw aankoopbewijs voor garantieclaims.
For technical support, service, or warranty inquiries, please contact Hitachi Global Life Solutions customer service. Contact information can typically be found on the official Hitachi webwebsite of op uw aankoopdocumentatie.
Let op: Bij niet-geautoriseerde reparaties of wijzigingen vervalt de garantie.
