SmallRig Field Monitor Mount Holder 2905B Instruction Manual

Invoering

The SmallRig Field Monitor Mount Holder 2905B is an upgraded accessory designed to securely attach 5-inch and 7-inch camera monitors to camera cages or handles via a cold shoe mount. This mount offers enhanced flexibility with its swivel and tilt adjustment capabilities, allowing for optimal viewing angles during photography and videography. Its robust construction and thoughtful design ensure stability and protection for your valuable equipment.

Producteigenschappen

• Verbeterde versie: Model 2905B is an enhanced monitor mount designed for 5” and 7” camera monitors, attaching via a cold shoe on camera cages or handles.
• Tension Adjustable: The mount allows for 180-degree tilt and 360-degree swivel. Tilt tension is quickly adjusted with a thumbscrew, while swivel tension is adjusted using the provided Allen wrench.
• Anti-Twist Design: Features bouncy locating pins on the top to further secure monitors like the Ninja V/V+, and a silicone pad to prevent scratching and twisting.
• Brede compatibiliteit: Equipped with a cold shoe adapter at the bottom for connection to camera cages, and a 1/4"-20 threaded hole on top to support monitors, microphones, lights, and other accessories.
• Load Capacity Note: Different tilt angles affect load capacity: 90° load capacity is less than 9.3 lbs (4.2 kg); 45° tilt load capacity is less than 5.5 lbs (2.5 kg); 30° tilt load capacity is less than 5 lbs (2.3 kg). For safety, always re-tighten the 1/4'' knurled screw with the Allen wrench.

Inhoud van het pakket

The SmallRig Field Monitor Mount Holder 2905B package includes the following items:

• Monitorbevestiging x 1
• Inbussleutel x 1

Instellen en installeren

Follow these steps to properly set up and install your SmallRig Field Monitor Mount Holder 2905B:

1. Attach the Mount to Your Camera Rig:
   The monitor mount features a cold shoe adapter at its base. Slide this adapter into the cold shoe slot on your camera, camera cage, top handle, or side handle. Secure it by tightening the knurled thumbscrew on the cold shoe base.
2. Attach Your Monitor:
   The top of the mount has a 1/4"-20 screw and bouncy locating pins. Align the 1/4"-20 threaded hole on your monitor with the screw on the mount. Screw the monitor onto the mount until it is snug. The bouncy locating pins will engage with corresponding holes on compatible monitors (e.g., Ninja V/V+) to prevent twisting. Ensure the silicone pad on the mount protects your monitor from scratches.
3. Secure the Monitor:
   For additional security, use the provided Allen wrench to re-tighten the 1/4'' knurled screw that holds the monitor.

Gebruiksaanwijzing

The SmallRig Field Monitor Mount Holder 2905B offers flexible positioning for your monitor:

• Kantelaanpassing: The monitor mount can tilt 180 degrees. To adjust the tilt, loosen the thumbscrew on the side of the mount, position your monitor to the desired angle, and then re-tighten the thumbscrew firmly.
• Draaiaanpassing: The mount can swivel 360 degrees. To adjust the swivel, use the provided Allen wrench to loosen the screw on the swivel axis, rotate your monitor to the desired orientation, and then re-tighten the screw securely.
• Load Capacity Considerations: Be mindful of the load capacity, which varies with the tilt angle. Ensure your monitor's weight does not exceed the specified limits for the chosen angle to maintain stability and prevent damage.

Verenigbaarheid

The SmallRig Field Monitor Mount Holder 2905B is designed for broad compatibility with various monitors and camera setups:

• Monitorformaten: Supports 5-inch and 7-inch camera monitors.
• Compatibele monitoren: Includes, but is not limited to, SmallHD Focus Series, SmallHD Focus OLED Series, SmallHD UltraBright Series, SmallHD 500 Series, 700 Series, Atomos Ninja Series, Atomos Shogun Flame, Blackmagic Video Assist 5", and Blackmagic Video Assist 4K 7".
• Montageopties: Attaches to any camera hot shoe, camera cage, or handle that features a cold shoe slot or a 1/4"-20 threaded hole.

Onderhoud

To ensure the longevity and optimal performance of your SmallRig Field Monitor Mount Holder 2905B, follow these maintenance guidelines:

• Schoonmaak: Use a soft, dry cloth to wipe down the mount. Avoid abrasive cleaners or solvents that could damage the finish or materials.
• Inspectie: Regularly check all screws and moving parts for tightness. Re-tighten any loose components using the provided Allen wrench to prevent accidental detachment of your monitor.
• Opslag: Store the mount in a clean, dry environment away from extreme temperatures and humidity when not in use.
• Smering: Moving parts are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer, as this could attract dust and debris.

Probleemoplossing

If you encounter any issues with your SmallRig Field Monitor Mount Holder 2905B, consider the following:

• Monitor Wobbles or Tilts Unexpectedly:
  Oplossing: Ensure all thumbscrews and the 1/4'' knurled screw are fully tightened. Use the provided Allen wrench to tighten the swivel tension screw if the monitor rotates too freely. Check that the monitor's weight is within the specified load capacity for the current tilt angle.
• Difficulty Attaching to Cold Shoe:
  Oplossing: Verify that the cold shoe adapter on the mount is properly aligned with the cold shoe slot on your camera rig. Ensure no debris is obstructing the slot. Loosen the cold shoe thumbscrew completely before attempting to slide it in.
• Monitor Not Sitting Flush:
  Oplossing: Check for any obstructions between the monitor and the mount's top plate. Ensure the bouncy locating pins are correctly engaging with the monitor's mounting holes (if applicable) and that the silicone pad is not misaligned.

Specificaties

Garantie en ondersteuning

For warranty information, technical support, or service inquiries regarding your SmallRig Field Monitor Mount Holder 2905B, please refer to the official SmallRig webwebsite of neem rechtstreeks contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs voor eventuele garantieclaims.