Compex Edge 3.0 Muscle Stimulator with TENS Kit Instruction Manual

1. Product voorbijview

The Compex Edge 3.0 is an advanced muscle stimulator and TENS unit designed to enhance muscle performance, accelerate recovery, and provide pain relief. This device features a redesigned, water-resistant silicone sleeve, an improved LCD display, and a central navigation button for ease of use. It includes four distinct programs to cater to various training and recovery needs.

Belangrijkste kenmerken:

• Redesigned Unit: Features a water-resistant silicone sleeve, improved LCD display, center navigation button, and enhanced grip.
• Lange batterijduur: Equipped with a USB rechargeable Lithium Ion battery providing up to 8 hours of stimulation.
• 4 Programma's: Includes two Strength programs, one Recovery program, and one TENS program for comprehensive muscle care.
• Veelzijdig gebruik: Aids performance and recovery when used before, during, or after workouts.

Image 1.1: The Compex Edge 3.0 Muscle Stimulator unit. This image shows the device's front with its improved LCD display and central navigation button, highlighting its sleek design and user-friendly interface.

2. Getting Started: Setup and Charging

Before using your Compex Edge 3.0, ensure it is fully charged and properly set up. The device comes with a convenient carrying case for protection and portability.

2.1 Uitpakken en eerste betaling

1. Open the Carrying Case: Unzip the protective carrying case to access the Compex Edge 3.0 unit and its accessories.
2. Locate the Device: The main unit is securely nestled within a foam insert inside the case.
3. Laad de batterij op: Connect the provided USB charging cable to the device and a suitable USB power source. Allow the device to charge completely before first use. A full charge can provide up to 8 hours of stimulation.

Image 2.1: The Compex Edge 3.0 unit and accessories neatly organized within its protective carrying case. The case ensures all components are secure and easy to transport.

2.2 Elektroden aansluiten

The Compex Edge 3.0 uses lead wires to connect the device to self-adhesive electrodes, which are then placed on the skin over the target muscles.

1. Aansluitdraden bevestigen: Connect the colored lead wires to the corresponding ports on the top of the Compex Edge 3.0 unit. Each lead wire typically has two connectors for electrodes.
2. Prepare Electrodes: Ensure the self-adhesive electrodes are clean and have good adhesion. Replace electrodes when they lose their stickiness.
3. Connect Electrodes to Lead Wires: Attach the electrodes to the ends of the lead wires.

Afbeelding 2.2: Close-up view of the Compex Edge 3.0 with its lead wires connected to the top ports. Each wire is color-coded for easy identification and proper electrode placement.

3. Het apparaat bedienen

The Compex Edge 3.0 offers four programs to assist with muscle training, recovery, and pain management. Follow these steps for safe and effective operation.

3.1 Program Selection and Electrode Placement

1. Inschakelen: Druk op de aan/uit-knop om het apparaat in te schakelen.
2. Selecteer programma: Use the navigation buttons and improved LCD display to choose one of the four available programs:
   • Strength (2 programs): For muscle strengthening and endurance.
   • Recovery (1 program): To aid in post-workout muscle recovery.
   • TENS (1 program): For pain relief.
3. Elektrode plaatsing: Refer to the device's on-screen guides or the included quick start guide for recommended electrode placement for your chosen program and target muscle groups. Ensure electrodes are placed on clean, dry skin.
4. Pas intensiteit aan: Once electrodes are in place and the program is selected, gradually increase the intensity using the device's controls. Adjust the intensity until you feel a strong, yet comfortable, muscle contraction or tingling sensation (for TENS). The intensity can be set from 1 to 100.

Image 3.1: A user adjusting the intensity of the Compex Edge 3.0 while electrodes are placed on their leg muscles. This demonstrates the device in active use for muscle stimulation.

Image 3.2: An athlete using the Compex Edge 3.0 for recovery, demonstrating how the device can be integrated into a post-workout routine. The electrodes are visible on the user's legs.

3.2 Video Demonstration: Using the Compex Edge 3.0

Watch this video for a practical demonstration of how to set up and use your Compex Edge 3.0 Muscle Stimulator for recovery and muscle development.

4. Onderhoud en verzorging

Proper maintenance ensures the longevity and optimal performance of your Compex Edge 3.0.

• Het apparaat reinigen: Veeg het apparaat schoon met adamp cloth. Do not submerge the device in water. The silicone sleeve provides water resistance, but it is not fully waterproof.
• Elektrodeverzorging: After each use, place the electrodes back on their protective plastic film. Store them in a cool, dry place. Replace electrodes when they no longer adhere properly or if they cause discomfort.
• Onderhoud van de batterij: Recharge the Lithium Ion battery regularly. Avoid completely draining the battery frequently to prolong its lifespan.
• Opslag: Store the Compex Edge 3.0 and its accessories in the provided carrying case when not in use to protect them from damage.

5. Probleemoplossing

If you encounter issues with your Compex Edge 3.0, refer to the following common troubleshooting tips.

• No Stimulation/Weak Sensation:
  • Zorg ervoor dat het apparaat is ingeschakeld en volledig is opgeladen.
  • Check that lead wires are securely connected to both the device and the electrodes.
  • Verify electrodes are firmly adhered to clean, dry skin. Replace old or worn electrodes.
  • Verhoog geleidelijk het intensiteitsniveau.
• Apparaat gaat niet aan:
  • Zorg ervoor dat de batterij is opgeladen. Sluit het apparaat aan op een oplader en wacht een paar minuten voordat u het opnieuw probeert in te schakelen.
• Foutcodes: If an error code appears on the display (e.g., "S. Code: 0x07"), power off the device, wait a few seconds, and power it back on. If the error persists, contact Compex Customer Service for assistance.
• Huidirritatie: If skin irritation occurs, discontinue use immediately. Ensure electrodes are clean and properly placed. Avoid using on broken or irritated skin.

For further assistance or issues not covered here, please contact Compex Customer Service.

6. Specificaties

7. Garantie en ondersteuning

Compex provides support for its products. It is recommended to register your product to ensure warranty coverage and access to customer service.

• Product registratie: Visit the official Compex website to register your Edge 3.0 Muscle Stimulator. Product registration helps validate your warranty and provides access to product updates and support.
• Klantenservice: For any questions, technical support, or warranty claims, please contact Compex Customer Service. Contact information can typically be found on the official Compex website or in the quick start guide included with your device.
• Juridische disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This device is intended for muscle stimulation and pain relief as indicated by its programs.