1. Inleiding
Thank you for choosing the LUTEC P6221W-PIR24 Motion Activated Dual-Head Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions carefully before installation and retain them for future reference.
This floodlight features two adjustable LED light heads, an integrated motion sensor, and is designed for outdoor use, providing 2000 lumens of bright, 5200K daylight white light with 18 watts of power consumption.
Image 1.1: Two LUTEC P6221W-PIR24 dual-head floodlights, showcasing the product's design and dual light heads.
2. Veiligheidsinformatie
- Elektrische veiligheid: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring procedures.
- Aarding: Zorg ervoor dat het apparaat goed geaard is om een elektrische schok te voorkomen.
- Buitengebruik: This product is rated IP54 for outdoor use and is waterproof. However, ensure all connections are sealed properly to prevent water ingress.
- Warmte: LED lights can generate heat. Do not touch the fixture immediately after operation.
- Oogveiligheid: Kijk niet rechtstreeks in de LED-lichtbron als deze brandt. Dit kan oogvermoeidheid of oogschade veroorzaken.
- Installatiehoogte: For optimal motion detection, install the light at a recommended height of approximately 8.2 feet (2.5 meters).
3. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- LUTEC P6221W-PIR24 Dual-Head Floodlight (2 units)
- Wire connectors (2 x 18AWG)
- Outlet Box Screws (2)
- Montagebeugel (1)
- Fixture Screws (2)
- Rubber Stopper (1)
- Pakking (1)
Image 3.1: Diagram illustrating the various components included in the package, such as wire connectors, screws, mounting bracket, rubber stopper, and gasket.
4. Installatie en installatie
Volg deze stappen voor een correcte installatie:
- Schakel de stroom uit: Voordat u begint, moet u ervoor zorgen dat de stroom naar de installatieruimte is uitgeschakeld via de stroomonderbreker.
- Montagebeugel Installatie: Secure the mounting bracket to the wall or junction box using the provided outlet box screws. Ensure it is firmly attached.
- Bedrading: Connect the floodlight's wires to your household wiring. Typically, this involves connecting the black wire (live) to black, white wire (neutral) to white, and the ground wire to ground. Use the provided wire connectors and ensure all connections are secure.
- Bevestiging van het armatuur: Carefully align the floodlight fixture with the mounting bracket and secure it using the fixture screws. Ensure the gasket is properly seated to maintain the waterproof seal.
- Lichtkoppen en sensor afstellen: The dual light heads and the motion sensor are adjustable. Position them to cover your desired area. The light heads can be rotated 360 degrees, and the sensor can be angled for optimal detection.
- Herstel de stroom: Zodra de installatie is voltooid en alle verbindingen goed vastzitten, schakelt u de stroom bij de stroomonderbreker weer in.
Image 4.1: A person using a screwdriver to secure the floodlight during installation, demonstrating the final mounting step.
Image 4.2: A diagram illustrating the adjustable design of the floodlight, with arrows indicating the rotational movement of the light heads and motion sensor for customizable coverage.
Image 4.3: The floodlight installed above a house entryway, demonstrating its motion sensor capabilities with a 110-degree sensing angle and a maximum range of 50 feet. The image also highlights the recommended installation height of 8.2 feet for optimal performance.
5. Gebruiksaanwijzing
The LUTEC P6221W-PIR24 floodlight is designed for automatic operation based on motion detection.
Instellingen bewegingssensor
The motion sensor has a 110-degree sensing angle and can detect motion up to 50 feet (approximately 15 meters) away. The duration for which the light stays on after motion detection can be adjusted using the switch located on the motion sensor unit.
Afbeelding 5.1: Een close-up view of the motion sensor's adjustment switch, showing options for setting the light duration to 1 minute, 3 minutes, 10 minutes, or a 'TEST' mode.
- TESTmodus: Use this setting during installation to verify the sensor's coverage area. The light will turn on for a short period each time motion is detected.
- 1 MIN: The light will remain on for approximately 1 minute after motion is no longer detected.
- 3 MIN: The light will remain on for approximately 3 minutes after motion is no longer detected.
- 10 MIN: The light will remain on for approximately 10 minutes after motion is no longer detected.
Image 5.2: The floodlight illuminating a backyard at night, visually representing the adjustable lighting durations of 1, 3, and 10 minutes after motion detection.
6. Onderhoud
Regelmatig onderhoud zorgt ervoor dat uw schijnwerper optimaal presteert en lang meegaat.
- Schoonmaak: Reinig de lichtkoppen en de lens van de bewegingssensor regelmatig met een zachte, droge doek.amp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen. Zorg ervoor dat de stroom is uitgeschakeld voordat u gaat reinigen.
- Inspectie: Controleer het armatuur regelmatig op beschadigingen, losse verbindingen of slijtage. Pak eventuele problemen direct aan.
- Waterdichte afdichting: Check the integrity of the waterproof seals, especially around the mounting area, to prevent water intrusion.
Image 6.1: The LUTEC floodlight installed on an exterior wall, shown with rain falling, emphasizing its waterproof design suitable for various outdoor applications.
7. Probleemoplossing
If you encounter issues with your floodlight, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Licht gaat niet aan. | Geen stroomvoorziening. Losse bedradingsverbinding. Sensor detecteert geen beweging. | Controleer de stroomonderbreker. Verify all wire connections are secure (power off first). Adjust sensor angle or test sensitivity. |
| Licht blijft continu branden. | Continue beweging in de detectiezone. Sensor setting incorrect. | Clear obstructions or adjust sensor angle. Check the time setting on the sensor (e.g., ensure it's not stuck in TEST mode). |
| Licht gaat aan zonder duidelijke reden. | Sensor detecting small animals, moving branches, or heat sources. | Adjust sensor angle to exclude unwanted detection areas. |
| Het licht flikkert of dimt. | Onstabiele stroomvoorziening. Losse verbinding. | Raadpleeg een elektricien om de stroomvoorziening te controleren. Verify all wire connections are secure (power off first). |
8. Specificaties
- Model: P6221W-PIR24
- Merk: LUTEC
- Stroomverbruik: 18 Watt
- Helderheid: 2000 Lumen
- Kleurtemperatuur: 5200K daglicht wit
- Lichtbrontype: LED
- Deeltage: 120 volt (wisselstroom)
- Bewegingssensor: 110° sensing angle, up to 50 feet (15 meters) detection range
- Instelbare verlichtingstijd: 1 minuten, 3 minuten, 10 minuten
- Waterbestendigheid: IP54, waterdicht
- Materiaal: Plastic
- Montagetype: Muurbevestiging
- Afmetingen (B x D x H): 26.1 cm x 14.2 cm x 18.4 cm (10.28" x 5.59" x 7.24")
- Artikelgewicht: 1.83 pond (0.83 kg)
Image 8.1: A visual representation of the floodlight's key specifications, including its dimensions (W:10.28", D:5.59", H:7.24"), super bright 2000 lumen output, and 5200K color temperature.
9. Garantie en ondersteuning
LUTEC provides high-quality after-sales service. If you encounter any issues or have questions regarding your P6221W-PIR24 floodlight, please contact LUTEC customer support. We are available 7 days a week, 24 hours a day to assist you.
For support, please visit the official LUTEC webwebsite of raadpleeg de contactgegevens die u bij uw productverpakking vindt.
