Donkerglas AO900 Alpha Omega 900 bas AmpGebruikershandleiding voor versterkerkop en IFS-voetschakelaar

1. Inleiding

This manual provides detailed instructions for the Darkglass AO900 Alpha Omega 900 bass amplifier head and the Darkglass Intelligent Footswitch (IFS). The AO900 is a high-performance 900-watt bass amplifier designed to deliver powerful and versatile tones. It integrates Darkglass's Alpha and Omega drive engines, a studio-grade VCA compressor, and a comprehensive graphic equalizer. The IFS Footswitch provides remote control over key amplifier-functies.

2. Belangrijkste kenmerken

• 900-watt power output for robust performance.
• Integrated Alpha and Omega distortion engines for diverse tonal shaping.
• Studio-grade VCA compressor for dynamic control.
• 6-band graphic equalizer for precise tone sculpting.
• MIDI programmability for advanced control.
• Impulse response cabinet simulation with three storable virtual cabinets.
• Auxiliary input and headphone output for silent practice.
• Includes Darkglass Intelligent Footswitch for remote control.

3. Instellen

Follow these steps to set up your Darkglass AO900 amplifier and IFS Footswitch:

1. Stroomaansluiting: Sluit de amplifier to a suitable power outlet using the provided power cable. Ensure the power switch is in the OFF position before connecting.
2. Instrumentaansluiting: Plug your bass guitar into the INVOER jack on the front panel. Select the appropriate PASSIEF ACTIEF switch setting based on your instrument's output.
3. Luidsprekeraansluiting: Connect your speaker cabinet to the speaker output on the rear panel. Ensure the speaker impedance matches the amplifier's output requirements.
4. Voetschakelaar aansluiting: Connect the Darkglass Intelligent Footswitch to the designated footswitch input on the amplifier met behulp van een standaard instrumentkabel.
5. Eerste keer inschakelen: Zet de amplifier's power switch. The power indicator will illuminate.

4. Bedieningselementen en functies

Image 1: Front panel of the Darkglass AO900 Alpha Omega 900 bass amplifier head (left) and the Darkglass Intelligent Footswitch (right).

4.1. Amplifier Head (AO900)

• INVOER: 1/4-inch jack for instrument connection.
• PASSIVE/ACTIVE-schakelaar: Selects input impedance for passive or active instruments.
• COMP: Controls the amount of compression applied to the signal.
• RIT: Adjusts the amount of distortion from the Alpha Omega engine.
• NIVEAU: Sets the output level of the distorted signal.
• MODUS: Blends between the Alpha (tight, percussive) and Omega (brutal, raw) distortion circuits.
• MENGEN: Mixes the clean input signal with the distorted signal from the Alpha Omega engine.
• VERDIENEN: Controls the overall gain of the Alpha Omega engine.
• GROMMEN: A switch that provides a bass boost for a thicker, more powerful tone.
• BEET: A switch that provides a treble boost for added presence and clarity.
• Grafische equalizer: Four sliders visible on the front panel (250 Hz, 500 Hz, 1.5 kHz, 5 kHz) allow for precise frequency adjustments. The amplifier features a 6-band graphic equalizer in total.
• DEMPEN: Dempt de ampuitvoer van lifier.
• MEESTER: Regelt het algehele uitgangsvolume van de ampverliezer.

4.2. Intelligent Footswitch (IFS)

• Footswitch Button: Toggles the distortion engine on/off or mutes the amplifier, depending on the programmed function.
• AAN/UIT-LED: Geeft aan dat de amplifier is ingeschakeld.
• DISTORTION LED: Indicates when the Alpha Omega distortion engine is active.
• DEMPEN-LED: Geeft aan wanneer de amplifier's output is muted.

5. Gebruiksaanwijzing

To operate your Darkglass AO900 and IFS Footswitch:

1. After completing the setup, ensure all volume controls (including MEESTER) are set to a low level before playing.
2. Verhoog geleidelijk de MEESTER Stel het volume in op het gewenste luisterniveau.
3. Gebruik de DRIJFVEER, NIVEAU, MOD, MENGEN, En VERDIENEN controls to dial in your desired distortion tone. Experiment with the GROMMEN En BEET switches for additional tonal variations.
4. Adjust the graphic equalizer sliders (250 Hz, 500 Hz, 1.5 kHz, 5 kHz) to fine-tune your frequency response.
5. Engage the compressor using the COMP knob to control dynamics.
6. Use the IFS Footswitch to remotely activate/deactivate the distortion engine or mute the amplifier as needed during performance. The corresponding LEDs on the footswitch will indicate the active status.
7. For silent practice, connect headphones to the headphone output and use the auxiliary input for backing tracks.

6. Onderhoud

Goed onderhoud zorgt voor een lange levensduur en optimale prestaties van uw ampverliezer:

• Schoonmaak: Gebruik een zachte, droge doek om de ampDe buitenkant van de versterker. Vermijd schurende reinigingsmiddelen of oplosmiddelen.
• Opslag: Bewaar de ampBewaar de verdamper op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
• Ventilatie: Zorg voor voldoende ventilatie rondom de ampBescherm de ventilator tegen oververhitting. Blokkeer de ventilatieopeningen niet.
• Vervoer: When transporting, use appropriate protective cases to prevent physical damage.

7. Probleemoplossing

Als u problemen ondervindt, kunt u de volgende veelvoorkomende stappen voor probleemoplossing overwegen:

• Geen stroom: Check the power cable connection and the power outlet. Ensure the power switch is ON.
• Geen geluid: Verify all cable connections (instrument, speaker, footswitch). Check the MEESTER volume and ensure the MUTE function is not active on the amplifier or footswitch. Confirm your instrument is working correctly.
• Distorted Sound (unintended): Check input gain levels and ensure they are not excessively high. Adjust DRIJFVEER En NIVEAU controles.
• Voetschakelaar reageert niet: Ensure the footswitch cable is securely connected.
• Oververhitting: Zorg ervoor dat de amplifier has adequate ventilation. If the amplifier shuts down due to overheating, allow it to cool down before restarting.

Als de problemen aanhouden, raadpleeg dan een gekwalificeerde technicus.

8. Specificaties

• Model: AO900
• Uitgang Wattage: 900 Watt
• Signaalformaat: Analoog
• Number of EQ Bands: 6 (Graphic Equalizer)
• Artikelgewicht: 1 pound (amplifier head)
• Productafmetingen: 3 x 3 x 3 inch (amplifier head)
• ASIN: B07R4X6GH2
• UPC-nummer: 768563721939

9. Garantie en ondersteuning

Darkglass Electronics products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Darkglass Electronics website. For technical support or service inquiries, please contact Darkglass customer service through their official channels.