EDM RGB LED-spot 10W 806 Lumen LUMECO Model 70329 Gebruikershandleiding

1. Inleiding

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EDM RGB LED Spotlight 10W 806 Lumen LUMECO Model 70329. Please read this manual thoroughly before using the product and retain it for future reference.

The EDM RGB LED Spotlight is designed for various lighting applications, offering multi-color illumination and energy efficiency. It features a robust design suitable for outdoor use (IP65 rated) and comes with a remote control for convenient operation.

2. Veiligheidsinstructies

• Elektrische veiligheid: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation or maintenance.
• Deeltage: This spotlight operates on 220 Volts. Verify your power supply matches this requirement.
• Aarding: Ensure the spotlight is properly grounded to prevent electrical shock.
• Waterbestendigheid: The spotlight is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it should not be submerged in water.
• Warmte: Do not cover the spotlight during operation, as this can lead to overheating and damage. Maintain adequate ventilation around the unit.
• Lichtbron: Kijk niet rechtstreeks in de LED-lichtbron wanneer deze brandt. Dit kan oogvermoeidheid of oogschade veroorzaken.
• Kinderen: Keep the product and its remote control out of reach of children.

3. Inhoud van het pakket

Controleer het pakket op de volgende items:

• 1 x EDM RGB LED Spotlight 10W 806 Lumen LUMECO (Model 70329)
• 1 x Afstandsbediening
• 1 x Montagebeugel (vooraf bevestigd)

4. Product voorbijview

The EDM RGB LED Spotlight features a durable construction with a glass front and aluminum housing, designed for longevity and efficient heat dissipation. The included remote control allows for easy adjustment of colors and lighting modes.

Figuur 1: EDM RGB LED Spotlight (Model 70329) shown with its accompanying remote control. The spotlight features a black aluminum housing and a clear glass front, with exposed wiring for connection.

Figuur 2: EDM RGB LED Spotlight and remote control, highlighting key features such as 10W power, IP65 outdoor rating, 806 lumens brightness, and 21 high-quality LEDs. The remote shows buttons for color selection and lighting modes.

5. Instellen

5.1 Mounting the Spotlight

1. Kies locatie: Select a suitable mounting location that can support the weight of the spotlight and provides the desired illumination angle. Ensure the location is accessible for wiring and maintenance.
2. Veilige beugel: Use appropriate screws and anchors (not included) to securely fasten the pre-attached mounting bracket to the desired surface.
3. Hoek aanpassen: Loosen the screws on the sides of the mounting bracket to adjust the spotlight's angle. Tighten the screws firmly once the desired angle is achieved.

5.2 Elektrische aansluiting

WARNING: Ensure power is OFF at the circuit breaker before proceeding with electrical connections.

1. Draden identificeren: The spotlight comes with three wires: Live (typically brown or black), Neutral (typically blue), and Ground (typically green/yellow).
2. Draden aansluiten: Connect the spotlight's wires to your main power supply wires according to standard electrical practices (Live to Live, Neutral to Neutral, Ground to Ground). Use appropriate waterproof connectors for outdoor installations.
3. Isoleer verbindingen: Ensure all connections are properly insulated and protected from moisture, especially for outdoor use.
4. Herstel de stroom: Once all connections are secure and insulated, restore power at the circuit breaker.

6. Gebruiksaanwijzing

The EDM RGB LED Spotlight is controlled using the included infrared remote control. Ensure the remote control is pointed towards the spotlight's sensor for optimal response.

6.1 Functies afstandsbediening

• AAN/UIT: Druk op de ON button to turn the spotlight on, and UIT om het uit te zetten.
• Helderheidsaanpassing: Gebruik de Helderheid omhoog () En Helderheid omlaag () buttons to increase or decrease the light intensity.
• Kleurselectie: Druk op de R (Rood), G (Groente), B (Blue), or W (White) buttons for direct color selection. Additional color buttons provide various shades.
• Dynamische modi:
  • FLASH: Wisselt snel tussen de kleuren.
  • flitser: Geeft één kleur weer en gaat weer uit.
  • VERVAGEN: Vloeiende overgangen tussen kleuren.
  • ZACHT: A slower, more gradual transition between colors compared to FADE.

Note: While the product specifications mention 'App' as a control method, the primary control for this model is via the included infrared remote control as depicted in the product images.

7. Onderhoud

• Schoonmaak: Disconnect power before cleaning. Wipe the spotlight's glass and housing with a soft, damp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
• Inspectie: Periodically inspect the power cable and connections for any signs of damage or wear. Ensure the mounting bracket remains secure.
• LEDs: De LED-lichtbron is ontworpen voor een lange levensduur en kan niet door de gebruiker worden vervangen.

8. Probleemoplossing

9. Specificaties

10. Garantie en ondersteuning

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact EDM customer service directly. Keep your purchase receipt as proof of purchase.