LUNOS localization_B07MQ62LLD

Gebruikershandleiding voor het Lunos e² decentrale ventilatiesysteem

Model: localization_B07MQ62LLD

Invoering

This manual provides essential information for the installation, operation, and maintenance of your Lunos e² decentralized ventilation system. Please read this manual thoroughly before installation and operation to ensure proper function and safety. Keep this manual for future reference.

The Lunos e² system is a highly efficient, decentralized ventilation unit with heat recovery, designed for room-by-room ventilation. It operates on a reversible airflow principle using a ceramic regenerator, ensuring low energy consumption and quiet operation.

Productcomponenten

Ontploft view of Lunos e² ventilation unit components and accessories

Figuur 1: Ontploft view of the Lunos e² decentralized ventilation units and accompanying accessories. This image shows two complete ventilation units, two round ducts, a universal control unit, a power supply, and a wall switch. Each ventilation unit consists of an outer grille, a fan, a ceramic heat exchanger, and an inner panel with a filter.

The Lunos e² system includes:

  • Two Lunos e² decentralized ventilation units with heat recovery.
  • Ceramic storage elements, EPP foam housing, thermal insulation, G3 filter, and reversible EC motor.
  • Two round ducts (DN160 mm, 5000 mm length).
  • Two 1-WE 180 white exterior grilles (screw-on type).
  • Two 9/IBE interior panels with filter.
  • One 5/UNI-FT universal control unit for Lunos e².
  • One 5/NT18 power supply (18W) for the universal control unit.
  • One 5/W2U switch for the universal control unit.

Instellen en installeren

Installation should be performed by a qualified professional. Ensure all local building codes and regulations are followed.

Controles vóór installatie:

  • Verify wall thickness: Minimum 300 mm.
  • Ensure required hole diameter: 162 mm.
  • Controleer of er een stroomvoorziening (12V DC) beschikbaar is op de installatielocatie.

Installatiestappen:

  1. Drill a 162 mm diameter hole through the wall at the desired location, ensuring a slight downward slope to the outside for drainage.
  2. Insert the round duct (DN160 mm) into the drilled hole. Cut the duct to the appropriate length for the wall thickness.
  3. Install the Lunos e² ventilation unit into the duct. Ensure the ceramic heat exchanger and fan are correctly oriented.
  4. Mount the exterior grille (1-WE 180) on the outside of the wall, securing it with screws.
  5. Mount the interior panel with filter (9/IBE) on the inside of the wall.
  6. Connect the ventilation units to the 5/UNI-FT universal control unit.
  7. Connect the 5/NT18 power supply to the universal control unit and to the main power.
  8. Install the 5/W2U switch in a convenient location and connect it to the universal control unit.

Gebruiksaanwijzing

The Lunos e² system is designed for continuous operation to maintain optimal indoor air quality and heat recovery.

Basiswerking:

  • Use the 5/W2U switch to turn the system ON/OFF.
  • The universal control unit (5/UNI-FT) allows selection of different operating modes and fan speeds. Refer to the control unit's specific manual for detailed programming.
  • The system operates by alternating airflow direction every 70 seconds, allowing the ceramic heat exchanger to absorb heat from outgoing air and release it to incoming fresh air.

Bedrijfsmodi:

The Lunos e² system typically offers multiple fan speed settings to adjust ventilation rates:

  • Lage snelheid: 18 m³/h (1.4 W power consumption) - Ideal for continuous background ventilation.
  • Gemiddelde snelheid: 31 m³/h (2.8 W power consumption) - For increased ventilation needs.
  • Hoge snelheid: 38 m³/h (3.3 W power consumption) - For rapid air exchange, e.g., after cooking or showering.

The system also features humidity recovery, typically around 20-30%, to prevent excessive drying of indoor air during colder months.

Onderhoud

Regular maintenance ensures optimal performance and longevity of your Lunos e² ventilation system.

Filter vervangen/reinigen:

The G3 filter should be checked regularly and replaced or cleaned as needed, typically every 3-6 months depending on air quality.

  1. Turn off the ventilation system at the main switch.
  2. Carefully remove the interior panel.
  3. Remove the G3 filter.
  4. Clean the filter by vacuuming or gently washing with warm water (if washable type). Allow to dry completely before reinstallation. Replace if heavily soiled or damaged.
  5. Reinsert the clean/new filter and reattach the interior panel.
  6. Schakel het systeem weer in.

Ceramic Heat Exchanger Cleaning:

The ceramic heat exchanger should be cleaned annually or if performance degrades.

  1. Turn off the ventilation system.
  2. Remove the interior panel and filter.
  3. Carefully pull out the ceramic heat exchanger unit.
  4. Clean the ceramic core under running water. Do not use harsh detergents. Allow to dry completely.
  5. Reinsert the dry ceramic heat exchanger, ensuring correct orientation.
  6. Reinstall the filter and interior panel.
  7. Schakel het systeem weer in.

Exterior Grille Cleaning:

Periodically inspect and clean the exterior grille to ensure unobstructed airflow.

Probleemoplossing

If you experience issues with your Lunos e² system, consult the following table before contacting support.

ProbleemMogelijke oorzaakOplossing
System not operatingNo power supply; switch is OFF.Check power connection; ensure switch is ON. Verify power supply (5/NT18) is functioning.
Reduced airflow or efficiencyClogged filter; dirty ceramic heat exchanger; obstructed exterior grille.Clean or replace filter; clean ceramic heat exchanger; clear any obstructions from the exterior grille.
Ongebruikelijk geluidVentilator geblokkeerd; losse onderdelen.Turn off system and inspect fan for obstructions. Ensure all components are securely installed. If noise persists, contact support.
Condensatie rondom het apparaatImproper installation (e.g., no downward slope); extreme temperature difference.Ensure proper installation with slight downward slope. If problem persists, consult a professional.

Specificaties

Detailed technical specifications for the Lunos e² decentralized ventilation system.

Lunos e² Energy Label

Figuur 2: Energy label for the Lunos e² ventilation system, indicating an A+ energy efficiency rating, 40 dB sound level, and a maximum airflow of 38 m³/h.

Lunos e² Product Data Sheet

Figuur 3: Product data sheet for the Lunos e² ventilation system, detailing specifications such as supplier, model identification, specific energy consumption, type of heat recovery, thermal efficiency, maximum flow rate, power input, sound pressure level, and annual energy consumption.

ParameterWaarde
ModelLunos e²
Warmteterugwinningsrendement90.6%
Airflow Volume (m³/h)18 / 31 / 38
Power Consumption per unit (W)1.4 / 2.8 / 3.3
Rated Power (W/m³/h)0.09
Network Voltage12 V gelijkstroom
VochtigheidsherstelApprox. 20-30%
Geluidsdrukniveau (dB)16.5 / 19.5 / 26
Normal Sound Level (DN,W, open)42dB
Eenheid Lengte243mm
Minimale wanddikte300mm
Gatdiameter162mm

Garantie en ondersteuning

For warranty information, please refer to the documentation provided with your purchase or contact Lunos directly. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or further assistance, please contact Lunos customer service. Contact details can typically be found on the manufacturer's official webwebsite of op uw aankoopfactuur.

Fabrikant: Lunos

Webwebsite: www.lunos.de

© 2024 Lunos. All rights reserved. Information in this manual is subject to change without notice.

Gerelateerde documenten - localization_B07MQ62LLD

Preview LUNOS Nexxt Decentralised Ventilation System Installation Manual
Comprehensive installation guide for the LUNOS Nexxt decentralized ventilation system with heat recovery, covering technical specifications, mounting, electrical connections, DIP switch settings, filter replacement, and maintenance.
Preview LUNOS e² Series Decentralised Ventilation System Installation Manual
Installation manual for the LUNOS e² Series decentralized ventilation system with heat recovery. Includes technical specifications, electrical connection diagrams, and installation guidelines.
Preview AIRO+ 160 Decentrale Warmteterugwinningsunit | HAVACO
Ontdek de AIRO+ 160, een decentrale warmteterugwinningsunit van HAVACO, die efficiënte ventilatie biedt voor woningen en kantoren met een ultrastille werking en eenvoudige installatie. Lees meer over de technische specificaties, constructie en bedrijfsmodi.
Preview BSK Zephyr gedecentraliseerd warmteterugwinningsapparaat Gebruikershandleiding
Gebruikershandleiding voor het BSK Zephyr Decentrale Warmteterugwinningsapparaat met gedetailleerde informatie over de installatie, elektrische aansluiting, draadloze koppelingsmodi en bediening op afstand voor optimale luchtkwaliteit en comfort binnenshuis.
Preview BLAUBERG Freshpoint Eco 160(-E) Gebruikershandleiding - Decentrale warmteterugwinningsunit
Uitgebreide gebruikershandleiding voor de BLAUBERG Freshpoint Eco 160 en 160-E decentrale warmteterugwinningsunits, met informatie over installatie, bediening, onderhoud en probleemoplossing.
Preview BSK Zephyr V2.0 Gebruikershandleiding: Installatie-, bedienings- en onderhoudshandleiding
Uitgebreide gebruikershandleiding voor het BSK Zephyr V2.0 decentrale warmteterugwinningsapparaat. Inclusief installatie, draadloze koppeling, bediening op afstand, onderhoud en garantie.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.