Geko G02032 Low Profile Handleiding voor de garagekrik van 2.5 ton

1. Inleiding

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Geko G02032 Low Profile 2.5 Ton Garage Jack. Please read and understand all instructions and safety warnings before using this product. Proper use and maintenance will ensure long-lasting performance and user safety.

2. Veiligheidsinformatie

Always prioritize safety when operating hydraulic lifting equipment. Failure to follow these instructions may result in property damage, personal injury, or death.

• Lees de handleiding: Understand all operating procedures and warnings before use.
• Nominale capaciteit: Never exceed the jack's rated capacity of 2.5 tons.
• Gebruik op een harde, vlakke ondergrond: Always operate the jack on a hard, level surface capable of supporting the load. Avoid soft or uneven ground.
• Gebruik assteunen: After lifting a vehicle, immediately support it with appropriate jack stands. The hydraulic jack is a lifting device only, not a vehicle support device.
• Centreer de belasting: Zorg ervoor dat de lading gecentreerd op de krikzadel is. Een lading die niet in het midden staat, kan instabiliteit veroorzaken.
• Vrij werkgebied: Keep the work area clean and well-lit. Keep bystanders away from the vehicle and jack during operation.
• Inspecteer vóór gebruik: Controleer de krik vóór elk gebruik op beschadigingen, lekkages of losse onderdelen. Gebruik de krik niet als deze beschadigd is.
• Proper Lowering: Lower the load slowly and in a controlled manner.
• Persoonlijke beschermingsmiddelen: Wear appropriate safety gear, such as safety glasses and gloves.
• Vermijd wijzigingen: Wijzig de aansluiting niet en gebruik deze niet voor andere doeleinden dan waarvoor deze bedoeld is.

3. Productcomponenten

Familiarize yourself with the main components of your Geko G02032 garage jack.

Afbeelding 3.1: The Geko G02032 Low Profile 2.5 Ton Garage Jack, showcasing its full assembly with the handle attached. This image provides an overall view of the product's design and key features, including the low-profile chassis, lifting arm, saddle, and wheels.

Afbeelding 3.2: The Geko G02032 garage jack with its operating handle detached, illustrating the two main components. This view helps in understanding the assembly process and the compact nature of the jack when stored.

Afbeelding 3.3: Een close-up view of the jack's saddle and the product label. The label displays important information such as the brand 'Geko', model 'G02032', and safety warnings, while the saddle is the contact point for lifting the vehicle.

Afbeelding 3.4: A detailed shot of the product label on the Geko G02032 jack, highlighting the maximum lift capacity of 2.5 tons and the lifting height range of 80mm to 360mm. This information is crucial for safe operation.

Afbeelding 3.5: A close-up of the handle attachment point on the Geko G02032 jack. This shows the mechanism where the two-piece handle connects to the hydraulic pump, enabling lifting and lowering operations.

Afbeelding 3.6: Een gedetailleerde view of one of the swivel caster wheels on the Geko G02032 jack. These wheels allow for easy maneuverability and positioning of the jack under a vehicle.

Afbeelding 3.7: A close-up of one of the fixed wheels located at the front of the Geko G02032 jack. These wheels provide stability and support during lifting operations.

Afbeelding 3.8: Een gedetailleerde view of the hydraulic release valve mechanism on the Geko G02032 jack. This component is crucial for controlling the lowering speed of the jack.

Afbeelding 3.9: An alternative close-up perspective of the hydraulic mechanism and pivot points of the Geko G02032 jack, showing the robust construction and connection points for the lifting arm.

4. Instellen

4.1 Eerste montage

1. Bevestig de handgreep: Insert the lower handle section into the handle socket on the jack. Align the holes and secure it with the provided pin or bolt. Then, attach the upper handle section to the lower section, ensuring it is firmly connected.

4.2 Bleeding the Hydraulic System

Air can become trapped in the hydraulic system during shipping or storage, affecting performance. Bleed the system before first use:

1. Draai de hendel tegen de klok in om de ontlastklep volledig te openen.
2. Pump the handle vigorously 10-15 times to force any trapped air out of the system.
3. Draai de hendel met de klok mee om de ontlastklep te sluiten.
4. Test de krik door hem volledig omhoog te tillen en vervolgens weer te laten zakken. Herhaal dit indien nodig totdat de krik soepel werkt.

5. Gebruiksaanwijzing

5.1 Lifting a Vehicle

1. Maak het voertuig gereed: Parkeer het voertuig op een harde, vlakke ondergrond. Trek de handrem aan en blokkeer de wielen die op de grond blijven staan.
2. Plaats de krik: Locate the manufacturer-recommended lifting points on the vehicle chassis. Position the jack so the saddle is directly under the lifting point.
3. Sluit de ontlastklep: Turn the handle clockwise until the release valve is fully closed.
4. Til het voertuig op: Pump the handle up and down to raise the vehicle to the desired height.
5. Install Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points.
6. Lower onto Stands: Slowly turn the handle counter-clockwise to open the release valve and lower the vehicle onto the jack stands. Once the vehicle is securely resting on the stands, remove the hydraulic jack.

5.2 Lowering a Vehicle

1. Lichtjes optillen: If the vehicle is on jack stands, position the jack under the lifting point and pump the handle a few times to slightly raise the vehicle off the jack stands.
2. Verwijder de assteunen: Verwijder voorzichtig de steunen onder het voertuig.
3. Onderste voertuig: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you open the valve.
4. Jack verwijderen: Once the vehicle is fully lowered and resting on its wheels, remove the jack.

6. Onderhoud

Regelmatig onderhoud zorgt voor een lange levensduur en een veilige werking van uw krik.

• Smering: Smeer alle bewegende onderdelen, draaipunten en wielen periodiek in met lichte machineolie.
• Hydraulische vloeistof: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Use only high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
• Schoonmaak: Houd de krik schoon en vrij van vuil, vet en corrosieve materialen.
• Opslag: Bewaar de krik op een droge, schone plaats met de cilinder volledig ingetrokken om corrosie te voorkomen en de levensduur van de afdichting te verlengen.
• Inspectie: Regularly inspect for damage, wear, or leaks. Any damaged parts should be replaced by qualified personnel.

7. Probleemoplossing

8. Specificaties

9. Garantie-informatie

This Geko G02032 Low Profile 2.5 Ton Garage Jack is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or contact Geko customer support. Keep your proof of purchase for warranty claims.

10. Klantenservice

For technical assistance, parts replacement, or any questions regarding your Geko G02032 garage jack, please contact Geko customer support. Refer to the product packaging or the official Geko website voor de meest actuele contactinformatie.