1. Inleiding
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your LiftMaster 892LT 2-Button Remote Control Transmitter. The 892LT remote is designed to operate up to two garage door openers or gate operators, offering a convenient way to access your property. It is compatible with LiftMaster Security+ 2.0, 315 MHz, and 390 MHz systems, and replaces older models such as 972LM, 372LM, and 62LM.
Please read this manual thoroughly before attempting to program or operate the remote control to ensure proper function and safety.
Afbeelding 1.1: Voorkant view of the LiftMaster 892LT 2-Button Remote Control Transmitter.
2. Veiligheidsinformatie
To reduce the risk of severe injury or death, observe the following safety precautions:
- Do not enable the garage door opener if the door is not balanced or if springs are broken.
- Houd afstandsbedieningen altijd buiten het bereik van kinderen.
- Operate the garage door opener only when the door is in full view, free of obstructions, and the opener is properly adjusted.
- Do not allow children to play with the remote control or the garage door opener.
- This remote control is not intended for use with any garage door opener manufactured before 1993 that does not have a safety reversal system.
3. Inhoud van het pakket
Controleer of alle artikelen in uw pakket aanwezig zijn:
- LiftMaster 892LT 2-Button Remote Control Transmitter
- CR2 lithiumbatterij (voorgeïnstalleerd)
- Visor Clip
4. Instellen en programmeren
The 892LT remote control can be programmed to operate up to two different garage door openers or gate operators. Follow these steps to program your remote:
4.1. Locate the Learn Button on Your Opener
The location and color of the Learn button vary by garage door opener model. Refer to your garage door opener's manual if you cannot locate it. Common locations include the back or side panel of the motor unit.
Image 4.1: The 892LT remote supports Security+ 2.0 technology for enhanced security.
4.2. Programmeerstappen
- Press and Release the Learn Button: On your garage door opener, press and immediately release the Learn button. The Learn LED on the opener will glow steadily for 30 seconds.
- Press and Hold the Remote Button: Within 30 seconds, press and hold the button on your 892LT remote control that you wish to program.
- Release the Remote Button: Laat de knop op de afstandsbediening los wanneer de lampjes van de garagedeuropener knipperen of wanneer u twee klikgeluiden hoort. Dit geeft aan dat de afstandsbediening succesvol is geprogrammeerd.
- Test de afstandsbediening: Press the programmed button on your remote control. The garage door opener should activate.
If you are programming a second button for another opener, repeat the steps above, selecting a different button on the 892LT remote and the Learn button on the second opener.
Image 4.2: The 892LT features a multi-use design, allowing control of up to two devices.
5. Gebruiksaanwijzing
Na de programmering is de bediening van uw LiftMaster 892LT afstandsbediening heel eenvoudig:
- To Open or Close the Door: Press the programmed button on your remote control. The garage door or gate will begin to move.
- To Stop the Door: Press the programmed button again while the door is in motion.
- To Reverse the Door: If the door is stopped mid-travel, pressing the button again will reverse its direction.
Ensure you have a clear line of sight to the garage door or gate when operating the remote to prevent accidents.
6. Onderhoud
6.1. Batterij vervangen
The 892LT remote uses one CR2 lithium battery. When the battery is low, the remote's range may decrease, or the LED indicator may not light up consistently.
- Open de externe Casing: Use a small coin or screwdriver to gently pry open the remote control casing.
- Oude batterij verwijderen: Verwijder voorzichtig de oude CR2-batterij.
- Nieuwe batterij plaatsen: Plaats een nieuwe CR2-batterij met de positieve (+) kant naar boven.
- Sluit Casing: Klik de afstandsbediening vast.asing weer stevig aan elkaar vast.
6.2. Schoonmaken
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the remote's electronics.
7. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| De afstandsbediening activeert de opener niet. | Remote is not programmed or battery is dead. | Re-program the remote (Section 4.2). Replace the battery (Section 6.1). |
| Remote has reduced range. | Lage batterij of storing. | Replace the battery (Section 6.1). Check for sources of interference near the opener. |
| Opener lights flash but door does not move. | De veiligheidssensoren zijn geblokkeerd of verkeerd uitgelijnd. | Check and clear any obstructions from the safety sensors. Align the sensors if necessary. |
8. Specificaties
- Model: 892LT
- Knoppen: 2
- Verenigbaarheid: LiftMaster Security+ 2.0, 315 MHz, 390 MHz, 433 MHz
- Batterij: 1 x CR2 Lithium (meegeleverd)
- Afmetingen: Ongeveer 5.12 x 2.72 x 1.14 inch (13 x 6.9 x 2.9 cm)
- Gewicht: Ongeveer 2.08 ounces (0.06 kg)
- UPC-nummer: 734721923729
9. Garantie en ondersteuning
Voor garantie-informatie en technische ondersteuning kunt u terecht bij de officiële klantenservice van de fabrikant. webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.
