Handleiding voor de Alpine SPS-M601W 6.5-inch marine coaxiale luidsprekers

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine SPS-M601W 6.5-inch 2-Way Marine Coaxial Speakers. Designed for marine environments, these speakers offer high-quality audio performance and durability. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

2. Veiligheidsinformatie

Neem de volgende veiligheidsmaatregelen in acht om schade aan het product of letsel aan uzelf te voorkomen.

Blootstelling aan water: While designed for marine use with IPX5 water resistance, avoid direct high-pressure water jets.
Stroomaansluitingen: Ensure all power connections are secure and correctly polarized to prevent electrical shorts or damage.
Montage: Mount speakers securely to prevent detachment during vessel movement.
Volumeniveaus: Langdurige blootstelling aan hoge geluidsniveaus kan gehoorschade veroorzaken.
Professionele installatie: If you are unsure about any installation steps, consult a qualified marine audio technician.

3. Installatie en installatie

Proper installation is crucial for optimal performance and durability of your marine speakers. This section outlines the general steps for mounting and wiring.

3.1. Uitpakken en inspecteren

Carefully remove the speakers from their packaging. Inspect for any signs of damage during transit. Ensure all components are present:

Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers
Bevestigingsmateriaal (schroeven, klemmen)
Roosters

Four Alpine SPS-M601W marine speakers, two with grilles and two without, showing the cone and tweeter.

Image 1: Four Alpine SPS-M601W speakers, illustrating the product's appearance with and without grilles.

3.2. Selectie van de montageplaats

Choose a mounting location that provides adequate space for the speaker's depth and allows for proper sound dispersion. Ensure the surface is flat and sturdy enough to support the speaker's weight. Consider areas protected from direct, continuous water submersion.

Kant view of an Alpine SPS-M601W marine speaker with its grille attached, showing its depth and mounting flange.

Afbeelding 2: Zijkant profile of an Alpine SPS-M601W speaker, highlighting its mounting depth and grille design.

3.3. Cutting the Mounting Hole

Refer to the specifications section for the precise cutout diameter.
Use a template (often included or available from Alpine) to mark the cutting area.
Carefully cut the hole using an appropriate tool, ensuring clean edges.

3.4. Bedradingsaansluitingen

Connect the speaker wires to your marine audio amplifier or head unit. Observe correct polarity: positive (+) to positive and negative (-) to negative. Incorrect wiring can lead to phase issues and reduced sound quality.

The speakers have a nominal impedance of 4 Ohms.
Zorg ervoor dat uw amplifier is stable at a 4 Ohm load.

Close-up of the back of an Alpine SPS-M601W speaker, showing the wiring terminals and crossover components.

Afbeelding 3: Achterkant view of the speaker, detailing the wiring terminals and internal components for connection.

3.5. De luidsprekers vastzetten

Place the speaker into the mounting hole.
Align the mounting holes on the speaker frame with the pre-drilled holes on the mounting surface.
Secure the speaker using the provided screws. Do not overtighten.
Attach the grilles by aligning them with the speaker frame and pressing firmly until they click into place or securing with screws if applicable.

Two Alpine SPS-M601W marine speakers with their white grilles installed, ready for mounting.

Image 4: Two Alpine SPS-M601W speakers with grilles, demonstrating the finished appearance after installation.

4. Bediening

Once installed, your Alpine SPS-M601W speakers are ready for use. They are designed to integrate seamlessly with your existing marine audio system.

Inschakelen: Turn on your marine head unit or ampverliezer.
Audiobron: Select your desired audio source (radio, Bluetooth, auxiliary input, etc.).
Volume aanpassen: Gradually increase the volume to a comfortable listening level. Avoid excessively high volumes to prevent distortion and potential speaker damage.
Geluidsinstellingen: Pas de bas-, treble- en balansinstellingen aan op uw autoradio of amplifier to optimize sound quality according to your preference and the acoustic environment of your vessel.

Van dichtbij view of the Alpine SPS-M601W speaker cone and tweeter assembly without the grille.

Afbeelding 5: Gedetailleerd view of the speaker cone and tweeter, illustrating the 2-way coaxial design.

5. Onderhoud en verzorging

Regular maintenance ensures the longevity and optimal performance of your marine speakers.

Schoonmaak: Clean the speaker grilles and surrounds with a soft, damp doek. Vermijd schurende reinigingsmiddelen of oplosmiddelen.
Blootstelling aan zout water: After exposure to saltwater, rinse the speakers with fresh water to prevent salt buildup, which can corrode components.
UV-bescherming: The grilles are UV resistant (rated at ASTM D4329), but prolonged, extreme sun exposure can still affect appearance over time.
Inspectie: Controleer de bedrading regelmatig op corrosie of loszittende verbindingen. Zorg ervoor dat de bevestigingsschroeven goed vastzitten.

6. Probleemoplossing

If you experience issues with your Alpine SPS-M601W speakers, refer to the following common problems and solutions:

Geen geluid:
- Check all wiring connections for proper polarity and secure contact.
- Controleer de ampDe versterker of autoradio is ingeschakeld en functioneert naar behoren.
- Ensure the audio source is active and volume is turned up.
Vervormd geluid:
- Verlaag het volume van uw autoradio of ampverliezer.
- Controleer of de bedrading los zit.
- Zorg ervoor dat de ampDe versterker is niet overstuurd of clipt niet.
- Verify the impedance of the speakers matches the ampLifier's mogelijkheden.
Onderbroken geluid:
- Controleer de bedrading op losse verbindingen of corrosie.
- Check for any short circuits in the speaker wiring.
Eén luidspreker werkt niet:
- Swap the non-working speaker with a known working one to determine if the issue is with the speaker or the wiring/amplifier-kanaal.
- Check the balance settings on your head unit.

7. Specificaties

Detailed technical specifications for the Alpine SPS-M601W 6.5-inch Marine Coaxial Speakers.

Functie	Specificatie
Modelnaam	SPS M601W
Luidsprekertype	Woofer (Coaxial)
Luidsprekergrootte	6.5 inch
Surround Sound-kanaalconfiguratie	2.0
CTA-2031 Speaker Rating	35W RMS, 110W Peak Power
Nominale impedantie	4 Ohm
Frequentierespons	50Hz – 20kHz
Gevoeligheid	89dB
Waterbestendigheidsclassificatie	IPX5
UV-bestendigheid	ASTM D4329 (Grilles)
Salt Spray/Fog Resistance	ASTM B117
Productafmetingen	3 x 3 x 3 inches (approximate, for a single speaker)
Artikelgewicht	11.5 pond (voor de set van 4)
UPC	613815879367

Back of an Alpine SPS-M601W marine speaker showing the model number 'SPS-M601W' and other manufacturing details.

Image 6: Rear label of the speaker, displaying the model number SPS-M601W and manufacturing information.

8. Garantie en ondersteuning

Voor garantie-informatie en technische ondersteuning kunt u terecht bij de officiële Alpine-website. website or contact Alpine customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Visit the official Alpine Store for more products and support: Alpine Store op Amazon

	Alpine R2-S69 6x9 inch coaxiaal 2-weg luidsprekersysteem - installatie, specificaties en garantie Uitgebreide gids voor het Alpine R2-S69 6x9 inch coaxiale 2-weg luidsprekersysteem, met informatie over de installatie, technische specificaties, belangrijke waarschuwingen, productregistratie en beperkte garantie van Alpine Electronics.
	Installatiehandleiding voor Alpine BassRev 6.5-inch coaxiale 2-weg luidsprekers Installatiehandleiding voor Alpine BassRev 6.5-inch coaxiale 2-weg autoluidsprekers (BRVS65). Bevat informatie over de inhoud, bedrading, montage en afmetingen voor een complete audio-installatie.
	Alpine S2-S40C 4" Component 2-weg luidsprekersysteem - Specificaties en installatiehandleiding Uitgebreide handleiding voor het Alpine S2-S40C 4-inch component 2-weg luidsprekersysteem. Inclusief installatie-instructies, gedetailleerde specificaties, vermogensspecificaties, bedradingsschema's, buitenafmetingen, garantie-informatie en productregistratiegegevens. Leer hoe u uw Alpine-luidsprekers correct installeert en gebruikt voor optimale prestaties.
	Gebruikershandleiding voor het Alpine Status HDZ-653 & HDZ-65C componentluidsprekersysteem De officiële gebruikershandleiding voor de Alpine Status HDZ-653 (3-weg) en HDZ-65C (2-weg) Hi-Res componentluidsprekersystemen, met informatie over de inhoud van de verpakking, de buitenafmetingen, de bedradingsaansluitingen, de installatieprocedure en de technische specificaties.
	Alpine SPR-68 coaxiaal 2-weg luidsprekersysteem - Specificaties en installatiehandleiding Ontdek de specificaties, installatiehandleiding en beperkte garantie van het Alpine SPR-68 coaxiale 2-weg luidsprekersysteem. Lees meer over de functies, het vermogen en de afmetingen voor uw auto-audiosysteem.
	Installatiehandleiding en garantie-informatie voor het Alpine componentluidsprekersysteem Uitgebreide handleiding voor het installeren van Alpine componentluidsprekersystemen, inclusief belangrijke mededelingen, bedradingsinstructies, afmetingen, details over de beperkte garantie en informatie over productregistratie. Behandelt modelnummers BRV-S65C, BRV-S65, BRV-S40C, BRV-S40 en BRV-S80C.

Alpine SPS-M601W