DALS Lighting 6000-JB Junction Box Instruction Manual

1. Inleiding

The DALS Lighting 6000-JB Junction Box is designed to facilitate the power connection for 120-Volt LED puck light systems. This aluminum construction junction box provides a direct-wire solution, enabling the linking of multiple LED fixtures on a single circuit. It is intended for indoor use only and offers a reliable power distribution point for your lighting setup.

2. Veiligheidsinformatie

• Stroom loskoppelen: Always ensure the main power supply is turned off at the circuit breaker before beginning any installation, maintenance, or troubleshooting.
• Gekwalificeerde elektricien: De installatie moet worden uitgevoerd door een gekwalificeerde elektricien of een deskundige persoon die bekend is met elektrische bedrading en bouwvoorschriften.
• Deeltage: This product operates on 120 Volts. Incorrect wiring can lead to electrical shock or fire.
• Alleen voor gebruik binnenshuis: The 6000-JB Junction Box is rated for indoor use in dry locations only. Do not expose to moisture or outdoor elements.
• Aarding: Zorg voor een correcte aarding volgens de plaatselijke elektrische voorschriften.

3. Inhoud van het pakket

• 1 x DALS Lighting 6000-JB Junction Box for Power LED Puck Light

4. Installatie en installatie

The DALS Lighting 6000-JB Junction Box is designed for hardwired, direct-wire installation. Follow these general steps for proper setup:

1. Planplaatsing: Determine the optimal wall-mount location for the junction box, ensuring it is accessible and within reach of the power source and the LED puck lights it will power.
2. Bedrading voorbereiden: Ensure all wiring from the main power supply and to the LED puck lights is properly stripped and ready for connection.
3. Monteer de doos: Securely mount the junction box to a stable surface using appropriate fasteners (not included). The box is designed for wall mounting.
4. Maak elektrische aansluitingen: Connect the 120V input power wires to the designated terminals inside the junction box. Connect the output wires leading to your LED puck lights to the appropriate output terminals. Ensure all connections are secure and comply with local electrical codes.
5. Sluit de doos: Once all connections are made and verified, securely close the junction box cover.
6. Herstel de stroom: Schakel de hoofdstroomvoorziening weer in via de stroomonderbreker.

This image displays the DALS Lighting 6000-JB Junction Box, a white rectangular unit. It features a rocker switch on one side for power control and a circular output port labeled 'OUT' on another side, secured by four screws. The box is designed for direct-wire connections to power LED puck lights.

5. Gebruiksaanwijzing

The DALS Lighting 6000-JB Junction Box serves as a central power distribution point for your 120V LED puck lights. Its operation is straightforward:

• Power Control: The integrated rocker switch on the side of the junction box controls the power supply to the connected LED puck lights.
• Inschakelen: Flip the rocker switch to the 'I' (ON) position to supply power to the connected LED puck lights.
• Uitschakelen: Flip the rocker switch to the 'O' (OFF) position to cut power to the connected LED puck lights.

Ensure that all connected LED puck lights are compatible with a 120V power supply and are properly installed according to their respective instructions.

6. Onderhoud

The DALS Lighting 6000-JB Junction Box requires minimal maintenance.

• Schoonmaak: To clean the exterior of the junction box, ensure power is disconnected. Use a soft, dry, or slightly damp doek. Vermijd schurende reinigingsmiddelen, oplosmiddelen of agressieve chemicaliën, omdat deze de afwerking kunnen beschadigen.
• Geen door de gebruiker te onderhouden onderdelen: The junction box contains no user-serviceable parts. Do not attempt to open or repair the unit beyond making external electrical connections.
• Periodieke inspectie: Periodically inspect the junction box and its connections for any signs of damage, loose wiring, or overheating. If any issues are observed, disconnect power immediately and consult a qualified electrician.

7. Probleemoplossing

If your LED puck lights are not functioning as expected, consider the following troubleshooting steps:

• Geen stroom voor de verlichting:
  • Check if the rocker switch on the junction box is in the 'I' (ON) position.
  • Verify that the circuit breaker supplying power to the junction box is not tripped.
  • Ensure all electrical connections within the junction box and to the LED puck lights are secure.
• Intermitterende werking:
  • Inspect for any loose wiring connections.
  • Ensure the junction box is not exposed to excessive vibration or physical stress.
• Still Experiencing Issues: If troubleshooting steps do not resolve the problem, disconnect power and consult a qualified electrician or contact DALS Lighting customer support for assistance. Do not attempt to repair the unit yourself.

8. Specificaties

9. Garantie-informatie

The DALS Lighting 6000-JB Junction Box is covered by a 5 jaar beperkte garantie. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact DALS Lighting customer support.

10. Ondersteuning

For technical assistance, warranty claims, or any questions regarding the DALS Lighting 6000-JB Junction Box, please contact DALS Lighting customer support. Refer to the contact information provided on the product packaging or the official DALS Lighting webplaats.